lumencove® nano 2.0
Specification Sheet
WHITE
Client
Project name
Order#Type
Qty
FEATURES AND BENEFITS
Physical :
1f
t
• Polymer extruded housing
• Available in 1' or 4' [0.3m or 1.2m] sections
• Adjustable mounting brackets, +/- 81° aiming (tool-less)
• Beam angle: 120° x 120°
• IP20
• White standard finish
• Clear high-transmittance polycarbonate injected lens, frosted lens option available
• Indoor applications, dry/damp location only
• 10 year limited warranty1
up
20 da
5W 15 te
/ft 09 d
te 25
st
ed
va
l
Electrical :
• • • • • • • Performance summary
sf
or
CRI value: 80+
Binning within a 2 step MacAdam ellipse
Color temperatures: 2700K, 3000K, 3500K or 4000K
Lumen maintenance 100,000 hrs [L70 @ 25°C]
Lumen measurements comply with LM-79-08 standard
Operating temperatures: 0° C to 50° C [32F to 122F]
4ft fixture, clear lens*
ue
• • • • • • Powered by
HO
Performance :
Line voltage luminaire for 120V, 230V or 277V
Powered by Lumendrive AC step drive, no power supply onboard
Power and data in 1 cable (#16-4), white cable and connector standard
Thumb latch connectors, breakable under load
3W/ft - RO version, 5W/ft - HO version
Dimming options: 0-10V, DMX and DALI dimming enabled with Digital Data Bridge (accessory)
Lumentalk network enabled with Lumentalk Data Bridge (accessory)
RO - Regular output
HO - High output**
CCT [K]
Delivered
output [lm]
Efficacy
[lm/W]
Delivered
output [lm]
Efficacy
[lm/W]
2700K
1,188
99.2
1,668
87.6
3000K
1,310
109.6
1,696
89.1
3500K
1,265
105.7
1,868
98.5
4000K
1,358
114.2
1,840
97.9
*1ft fixture delivered output ratio = x0.25
Frosted lens option delivered output ratio = x0.85
**Estimated. Consult website for latest ies files and reports.
1
1
8 ", 47 2 "
[309mm, 1206mm]
12
TOP VIEW
7
1 "
16
[36mm]
1
Minimum
2"
[14mm] end to end spacing
3
"
8
[35mm]
1
FRONT VIEW
7
3
9
44 "
16 ",
4
[239mm, 1137mm]
3
"
8
[60mm]
2
3
3 "
16
[81mm]
81°
81°
SIDE VIEW
Maximum Pivot Limits
Adjustable in 9° increments
BOTTOM VIEW
1
The limited 10-year warranty is only valid if the product is operated in an ambient environment that does not exceed 25 °C. Otherwise, our limited 5-year warranty shall apply.
1/7
© Copyright Lumenpulse 2017
2017.03.30
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
GS - R1
1.877.937.3003
P.514.937.3003
F. 514.937.6289
[email protected]
www.lumenpulsegroup.com
10-year limited warranty.
Consult www.lumenpulsegroup.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumencove® nano 2.0
Specification Sheet
WHITE
MOUNTING DETAILS
MOUNTING PLATE DIMENSIONS
Ø 3"
16
[5mm]
11 "
4
[32mm]
BREAKABLE
TAB
13 "
17 "
16
8
[20mm] [48mm]
Ø 3"
16
[5mm]
5 "
32
[4mm]
SUGGESTED COVE DIMENSIONS
120°
111 "
16
[43mm]
111 "
16
[43mm]
3"
[76mm]
Suggested cove dimensions for
minimum cove height
MAXIMUM ANGLE ADJUSTMENT
A jumper cable is required for angles greater than 45°.
TOP VIEW
45˚
2/7
© Copyright Lumenpulse 2017
2017.03.30
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
GS - R1
1.877.937.3003
P.514.937.3003
F. 514.937.6289
[email protected]
www.lumenpulsegroup.com
10-year limited warranty.
Consult www.lumenpulsegroup.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumencove® nano 2.0
Specification Sheet
WHITE
ACCESSORIES
Order separately, refer to each item’s specification sheet for ordering information
Cables (required):
Leader Cable for Lumencove® Nano 2.0, 10ft (3m) or 25ft (7.6m) standard lengths*
Jumper Cable for Lumencove® Nano 2.0, 2ft (0.6m) or 4ft (1.2m) standard lengths
Digital Data Bridge (required for dimming applications)*:
Digital Data Bridge converts 0-10V, DALI and DMX control protocols to be compatible with Lumencove® Nano 2.0.
*A Digital Data Bridge is included with every leader cable specified for dimming applications. Refer to the LCN2
leader cable specification sheet for details.
45"
16
[110mm]
4"
[102mm]
45"
16
[110mm]
TOP VIEW
4"
[102mm]
TOP VIEW
29"
16
[65mm]
21"
4
[58mm]
FRONT VIEW
SIDE VIEW
FRONT VIEW
UL version
SIDE VIEW
CE version
Lumentalk Data Bridge (optional dimming accessory):
DMX, 0-10V and TRIAC inputs enabled via Lumentranslator for the Lumentalk network.
Lumentalk control enabled with Lumentalk Data Bridge.
5
6 16 "
[160mm]
5
5 "
16
[135mm]
For 4x 1/4-20 UNC
(M6) screws
TOP VIEW
11
"
16
[169mm]
1
78"
[180mm]
6
9
3 "
16
[91mm]
FRONT VIEW
3/7
© Copyright Lumenpulse 2017
2017.03.30
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
GS - R1
SIDE VIEW
1.877.937.3003
P.514.937.3003
F. 514.937.6289
[email protected]
www.lumenpulsegroup.com
10-year limited warranty.
Consult www.lumenpulsegroup.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumencove® nano 2.0
Specification Sheet
WHITE
TYPICAL WIRING DIAGRAMS
Wiring Color Code
American
Color Code
CE
USE
Color Code
Black
White
Red
Orange
Brown
Blue
Black
Grey
Maximum run length - Lumencove® Nano 2.0 RO & HO
Live
Neutral
Data +
Data -
Cable length/Voltage
120V
230V
277V
25ft [8m] leader cable
150ft [46m]
300ft [91m]
300ft [91m]
Non-Dimming (NO)
Non-Dimming (NO) - Wiring detail
Non-Dimming
A
B
C
D
A
E
B
G
C
D
E
F
A - Power input
B - To fixture
C - Line
D - Neutral
E - Ground
F - Wire-nuts (by others)
G - Junction box (by others)
A - Power input (120V, 230V or 277V, to match fixture specified voltage)
B - Junction box (by others)
C - Leader cable (LCN2LC)
D - Lumencove Nano 2.0 (LCN2)
E - Jumper cable (LCN2JC)
Notes:
• Consult factory for specific applications and maximum fixture count/cable length recommendations.
• Regular Output version: 3 watts per foot [0.3m], High Output version: 5 watts per foot [0.3m].
4/7
© Copyright Lumenpulse 2017
2017.03.30
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
GS - R1
1.877.937.3003
P.514.937.3003
F. 514.937.6289
[email protected]
www.lumenpulsegroup.com
10-year limited warranty.
Consult www.lumenpulsegroup.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumencove® nano 2.0
Specification Sheet
WHITE
TYPICAL WIRING DIAGRAMS - continued
Wiring Color Code
American
Color Code
CE
USE
Color Code
Black
White
Red
Orange
Brown
Blue
Black
Grey
Maximum run length using Digital Data Bridge
Lumencove® Nano 2.0 RO & HO
Cable length/Voltage
Live
Neutral
Data +
Data -
25ft [8m] leader cable
120V
230V
150ft [46m]
277V
Maximum cable length between
Digital Data Bridge and 1st fixture
in run
100ft [30m] (#16-4 cable)
0-10V, DALI or DMX Dimming (Digital Data Bridge required)
10% minimum dimming value for 0-10V dimming, 5% minimum dimming value for DALI and DMX dimming
A - Power input (120V, 230V or 277V, to match fixture specified voltage)
B - Third party dimmer/DALI or DMX controller
C - Digital Data Bridge (DDB-DIM, DDB-DALI or DDB-DMX)
D - Leader cable (LCN2LC)
E - Lumencove Nano 2.0 (LCN2)
F - Jumper cable (LCN2JC)
C
A
D
E
F
B
Wiring Detail using Digital Data Bridge DDB-DIM, DDB-DALI or DDB-DMX (UL)
D
C
INPUT
OUTPUT
E
B
A
F
G
H
I
N
M
L
K
J
A - Power input (to match fixture specified voltage)
B - Ground (green)
C - Data +
D - Data E - Data - (orange)
F - Power and data output to fixture (4 or 5C/cable)
G - Data + (red)
H - Neutral (white)
I - Line (black)
J - Data input from third party dimmer/controller
K - Data - (orange)
L - Data + (purple)
M - Neutral (white)
N - Line (black)
G - Junction box (by others)
Wiring Detail using Digital Data Bridge DDB-DIM, DDB-DALI or DDB-DMX (CE)
INPUT
OUTPUT
B
A
C
K
J
I
H
G
A - Power input (to match fixture specified voltage)
B - Data - (grey)
C - Power and data output to fixture (4 or 5C/cable)
D - Data + (black)
E - Neutral (blue)
F - Line (brown)
G - Data input from third party dimmer/controller
H - Data - (grey)
I - Data + (black)
J - Line (brown)
K - Neutral (blue)
D
E
F
Notes:
• Consult factory for specific applications and maximum fixture count/cable length recommendations.
• 0-10V mA ratings: passive dimmer (Current Sink): 3mA per fixture, active dimmer (Current Source): 0.5mA per fixture.
• Regular Output version: 3 watts per foot [0.3m], High Output version: 5 watts per foot [0.3m].
5/7
© Copyright Lumenpulse 2017
2017.03.30
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
GS - R1
1.877.937.3003
P.514.937.3003
F. 514.937.6289
[email protected]
www.lumenpulsegroup.com
10-year limited warranty.
Consult www.lumenpulsegroup.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumencove® nano 2.0
Specification Sheet
WHITE
TYPICAL WIRING DIAGRAMS - continued
Wiring Color Code
American
Color Code
CE
USE
Color Code
Black
White
Red
Orange
Brown
Blue
Black
Grey
Maximum run length using Lumentalk Data Bridge
Lumencove® Nano 2.0 RO & HO
Cable length/Voltage
120V
25ft [8m] leader cable
Live
Neutral
Data +
Data -
230V
277V
Maximum cable length between
Digital Data Bridge and 1st fixture
in run
100ft [30m] (#16-4 cable)
150ft [46m]
Lumentalk (LT, Lumentranslator, Lumentalk Data Bridge and Digital Data Bridge required)
10 % minimum dimming value
A - Third party dimmer/DMX controller
B - Lumentranslator (LTL-010, -DMX)
C - Data wiring (by others)
D - Power line (120-277V AC)
E - Lumentalk Data Bridge (LDB-DIM or LDB-DMX)
F - Digital Data Bridge (DDB-DIM or DDB-DMX)
G - Leader cable (LCN2LC)
H - Lumencove Nano 2.0 (LCN2)
I - Jumper cable (LCN2JC)
B
F
A C
D
E
F
G
H
I
Wiring detail using LDB
(LDB-DIM or LDB-DMX)
Wiring Detail using Digital Data Bridge
DDB-DIM or DDB-DMX (UL)
B
C
D
E
A
D
C
INPUT
INPUT
OUTPUT
E
B
A
F
A - Power input (control over power line via Lumentalk system)
B - Line
C - Neutral
D - 0-10V + / Data +
E - 0-10V - / Data F - To next fixture
G - To Digital Data Bridge
Wiring Detail using Digital Data Bridge
DDB-DIM or DDB-DMX (CE)
OUTPUT
B
A
C
F
N
M
L
K
G
H
I
J
A - Power input (to match fixture specified voltage)
B - Ground (green)
C - Data +
D - Data E - Data - (orange)
F - Power and data output to fixture (4 or 5C/cable)
G - Data + (red)
H - Neutral (white)
I - Line (black)
J - Data input from third party dimmer/controller
K - Data - (orange)
L - Data + (purple)
M - Neutral (white)
N - Line (black)
G - Junction box (by others)
K
J
I
H
G
D
E
F
A - Power input (to match fixture specified voltage)
B - Data - (grey)
C - Power and data output to fixture (4 or 5C/cable)
D - Data + (black)
E - Neutral (blue)
F - Line (brown)
G - Data input from third party dimmer/controller
H - Data - (grey)
I - Data + (black)
J - Line (brown)
K - Neutral (blue)
Notes:
• Consult factory for specific applications and maximum fixture count/cable length recommendations.
• Lumentalk Data Bridge and Digital Data Bridge required for Lumentalk applications. All fixtures attached to the Digital Data Bridge will act as 1 zone.
For applications with all fixtures controlled as 1 zone: Digital Data Bridge and Lumentalk Data Bridge must be specified as DIM. Maximum of 24 Digital Data Bridges per Lumentalk Data Bridge (LDB-DIM). Consult
factory for details.
For applications where each Digital Data Bridge is a separate zone: Digital Data Bridge and Lumentalk Data Bridge must be specified as DMX. Maximum of 24 Digital Data Bridges per Lumentalk Data Bridge (LDB-DMX).
• For DMX applications: 1 DMX controller per Lumentalk network, maximum of 48 DMX channels per Lumentalk network (minimum step transition update rate is 1 second, minimum fade time between two colors is
1 minute). Consult factory for applications that require additional capabilities.
• Maximum of 1 transmitter (Lumentranslator or Lumenlink) per system
• No third party fixtures allowed on the same circuit.
• Consult factory for DALI Lumentalk applications.
• Regular Output version: 3 watts per foot [0.3m], High Output version: 5 watts per foot [0.3m].
6/7
© Copyright Lumenpulse 2017
2017.03.30
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
GS - R1
1.877.937.3003
P.514.937.3003
F. 514.937.6289
[email protected]
www.lumenpulsegroup.com
10-year limited warranty.
Consult www.lumenpulsegroup.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.
lumencove® nano 2.0
Specification Sheet
WHITE
HOW TO ORDER
LCN2
Select:
Select:
Select:
Select:
Select:
Select:
2
3
4
5
6
1
1
WH 7
6
Housing:
Lens:
LCN2 RO - Lumencove® Nano 2.0, Regular Output 3W/ft
LCN2 HO - Lumencove® Nano 2.0, High Output 5W/ft
2
CL - Clear lens
FR - Frosted lens
7
Certification:
Finish:
UL - UL compliant
CE - CE compliant
WH - White (standard finish)
3
Notes:
LCN2 is suitable for non-dimming and dimming
applications. For dimming applications, a Digital
Data Bridge is required. Specify a dimming control
option in the LCN2 leader cable order code.
Voltage:
120 - 120 volts
230 - 230 volts
277 - 277 volts
Consult the LCN2 leader cable specification sheet
for more information, as well as the accessories
page of this specification sheet.
4
Length:
12 - 12 1/8 inches (309mm) (0.23kg/0.5 lbs)
48 - 47 1/2 inches (1206mm) (0.68kg/1.5 lbs)
5
Colors and Color temperatures:
27K - 2700K
30K - 3000K
35K - 3500K
40K - 4000K
7/7
© Copyright Lumenpulse 2017
2017.03.30
1751 Richardson, Suite 1505
Montreal (Quebec) Canada
H3K 1G6
GS - R1
1.877.937.3003
P.514.937.3003
F. 514.937.6289
[email protected]
www.lumenpulsegroup.com
10-year limited warranty.
Consult www.lumenpulsegroup.com
for our complete Standard Terms
and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time
without prior notice and such modification shall be effective immediately.