NF3-3
Frame Assembly
DIMENSIONS:
SET UP INSTRUCTIONS:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
CONNECT BOTTOM AND TOP RAILS FOLLOWING THE LABELS
CONNECT SIDE RAILS
CLEAN THE FRAME AND PLACE THEM ON CLEAN PLACE
CAREFULLY REMOVE FABRIC COVER FROM BAG
PLACE COVER AROUND THE BOTTOM OF THE FRAME
PULL COVER CAREFULLY UP TO THE TOP
CLOSE ALL ZIPPERS
ADJUST FABRIC AROUND THE FRAME
CONNECT CABLE HARNESS TO THE EYEBOLTS
COMPLETELY TIGHTEN THREADED CONNECTORS
Assemble frame as shown
*Curves on spreaders face inside of frame
6' x 3'
Three sided Banner
GRAPHICS SIZE:
Printed outside only
72" x 36" (V)
16
17
11
PACKING:
15
BREAK DOWN INSTRUCTIONS:
REVERSE SET-UP STEPS TO BREAKDOWN FRAME
10
18
FABRIC CARE INSTRUCTIONS:
1.
UNZIP COVER ZIPPERS
2.
CAREFULLY REMOVE FABRIC COVER
3.
CLOSE ALL ZIPPERS
4.
FOLD OR ROLL NEATLY
5.
PLACE FABRIC IN COVER BAG
12
DESCRIPTION:
14
13
5
4
Standard Fabric Structure
Frame constructed of 30mm
tube w/ 30mm spreaders. ALL
Tube parts to be made from
6063-T6 Aluminum 30mm
extruded tube with .063" wall
thickness (CLEAR ANODIZE
FINISH). See part drawings for
more information.
Frame assembles with snap
buttons. Fabric cover is
pillowcase construction with
zipper on top side.
9
8
3
7
6
2
Frame parts
1
x3
35" Straight tube
w/ molded connector, eyebolt
Weight with fabric 27 lbs.
ZIPPER
x3
x3
35" Straight tube
w/ molded connector
x3
3' Corner
x6
32" Spreader
x3
27" Steel wire rope
33" Straight tube
x1
FABRIC COVER
Fabric Cover
MGC-50
Detailer
DD
File Name
NF3-3m.mcd
Scale
N/A
Date
11/12/08