HIGH FIVE
INSTRUCTION SHEET
1
Remove unit from rolling case.
4
Connect all locking arms.
2
5
Lay frame on floor with
graphic facing up.
Once unit is locked, lift frame
into place.
How to install / replace a graphic
1
Assemble frame and lay on its back.
Remove existing graphic.
3
Working in a continuous direction
around the frame, attach the rest of
the graphic. Make sure the graphic is
pulled taut while attaching the velcro.
2
4
Starting at one corner, attach velcro
on the graphic to velcro on the frame.
NOTE: Velcro on the graphic should
extend approx. 1/4” - 1/2” beyond
velcro on the frame (it should not be flush).
If needed, adjust velcro for taut fit.
3
Pull frame outward and align locking
arms. Make sure webbing is not wrapped
around the locking arms.