BOROUGH OF POINT PLEASANT
INSPECTION REQUIREMENTS
A building or structure shall not be used or occupied in whole or in part
until the Construction Official has issued a form Certificate of
Occupancy.
CONSTRUCTION HOURS IN RESIDENTIAL AREA:
8:00 A.M - 6:00 P.M MONDAY THRU SATURDAY. NO
CONSTRUCTION IS ALLOWED ON SUNDAY.
A port-a-john must be on the construction site prior to
commencing work and removed immediately upon completion
of the job.
Inspections will not be conducted unless a building permit is posted on
the building and a set of approved plans is on site.
For new construction, water and sewer connection fees must be paid in
the Water/Sewer Dept. prior to your first plumbing inspection
_ _ Footing - excavation, reinforcing prior to pouring. Some jobs have
monolithic pour where concrete slab & footings are poured together.
If so, rough slab plumbing and/or electric must be inspected if in slab
prior to building inspection
_ _ Foundation - foundation constructed, coved, pressure sill anchored;
waterproofed prior to backfill. If slab, ducts or piping installed.
FOUNDATION LOCATION SURVEY MUST BE SUBMITTED
PRIOR TO INSPECTION BEING SCHEDULED
_ _ Open Deck - except for basements
_ _ Sheathing - New construction; no roof shingles or windows
Additions; roof shingles and windows to be installed
HEIGHT CERTIFICATIONS REQUIRED FOR ALL
ADDITIONS & NEW CONSTRUCTION WHERE A SECOND
FLOOR IS CONSTRUCTED
_ _ Framing - Complete structural framing, including non-bearing walls,
subfloor sheathing, installation of duct work and/or heating pipes, and
all ducts to be insulated and all pipes exposed to be insulated. Exterior
complete and water tight. Vents and/or chimneys to be installed; all
hot air ducts to be installed. Framing checklist to be completed
and given to inspector at the time of inspection.
ROUGH PLUMBING, FIRE & ELECTRICAL INSPECTIONS
MUST BE APPROVED PRIOR TO FRAMING INSPECTION
BY THE BUILDING INSPECTOR
__ Insulation - Must be irr accordance with the Energy Conservation
Code
_ _ Final - All utility meters set, general compliance of plans as to type
of construction. Basic items of finishing, i.e., sheetrock and other
items of wall covering, doors, roof and side wall materials, ventilation,
any items that bears on the structural integrity of building, finished
floor. General good workmanship. Heating installation, all exterior
openings enclosed, all exterior parts protected from elements.
FINAL PLUMBING, FIRE & ELECTRICAL INSPECTIONS
MUST BE APPROVED PRIOR TO FINAL BUILDING
INSPECTION
FINAL AS-BUILT PLANS AND SURVEY TO BE SUBMITTED
FOR ALL NEW CONSTRUCTION
Inspector's Schedules: (732) 892-7129 referring to block/lot number,
address or permit number for next available date.
Building: Mon. - Fri.
Plumbing: Mon. - Fri.
Fire: Mon. & Thurs.
Electric: Mon., Wed. & Fri (after 11:30 am)
Permits in conjunction with Planning Board or Zoning Board approval
(subdivision & site plans): Refer to Ernie Peters, Remington, Vernick
& Vena (732-286-9220) for required inspections
and Ocean County Soil Conservation District: 609-971-7002
BLOCK:~~
LOT.
FRAMING CHECKLIST
Instructions: Builder 01· Sullcler's ruprosantatJve chacks l;loxes n1arl~ad 13'. SullcHng Inspector cilecl~s boxes 1narked ip. Rusponslbla Person In Churga of Work sluns, lnltfalu and data.a
In spaces provided. BuUdlng ll_1spector Initial~ and dates In spacen, provided.
4
NoTFO:: All /'ff:/'v/S SHOUlb EJE; AS SHOWN orv THE: PL.ANS OF? AS F?E:QU!RE:b EJY CODE:.
A. BASEMENT OR CRAWL SPACE
'I. ANCHORAGE:
2. SILL PLATES:
BOLTS
[fil [j
[fil [j
SPACING
SIZE
STRAPS
[jj] [j
lfil [j
SPACING (PER MANUFACTURER'S SPECS)
SIZE
[fil [)
[fil [j
[ill DJ
[fil DJ
[fil [j
lli] []
[[j
3.
BEAM POCKETS:
[fil [j]
[fil [j]
SIZE
GRADE, SPECIES
4.
BEARING/SHIMS
TERMITE PROTECTION OR CLEARANCE
TREATMENT
LAPS
SILL SEALER
COLUMNS:
[fil ITJ
[ij] [[]
[ij]_[[]
ATTACHMENT /PLATES
[El [[]
PAINT /COATING
SIZED Pm PLAN
SPACING/LOCATION
PROPER TREATMENT OVER FOUNDATION OPENINGS (BEARING OF JOIST)
m
TERMITE PROTECl!ON
B. Fl~OOR FRAMING AND FLOORING
1.
Box OR RIM JOIST, OR PERIMETER BAND JOIST:
2""
1"'
3""
4TH
lfil DJ [ill [j [fil ITJ
lfil [[] [ijJ DJ [ijJ DJ lfil [[]
[fil OJ
[JjJ [[] [ij] ITJ [[j [iJ [fil DJ
[Q] [jJ [ij] [iJ [ij] [iJ [ij] [jJ
lfil [[]
[ij] [jJ [ij] DJ
OD [i]
zi-m
31u.1
4n1
GRAOE, SPECIES
SINGLE OR DOUBLE
,
PRE-ENGINEERED PER MAN·
FACTURER'S SPECS
CANTILEVERS AS PER DESIGN
[jj] [i] [ill [iJ [fil [i]
FLOOR JOIST:
TO THE PLAN
[ij] DJ NAILING
@J ArrACHMENT SCHEDULE
[ij] [[] BEARING
[ij] DJ LAPPING
m
5.
FLOOR
PANEL SPAN, THICKNESS
[ij] IT!
[ijJ [[]
[JjJ IT!
[JjJ [j]
[ij] IT!
[fil [!
[ij] [[]
[ij] [j]
DTI OJ OD IT! [ij] DJ
[JjJ DJ [ij] [[] [JjJ DJ
lliJ DJ 0 [[] [JjJ DJ
[JjJ DJ [BJ DJ 0 OJ
[JjJ [j] [JjJ DJ 0 IT!
[ijJ DJ [fil [iJ [JjJ DJ
0 IT! [[] [j] [JjJ IT!
[ij] ITl [ill [[] ill] IT!
FLOOR
SIZED PER PLAN
GRADE, SPECIES
PRE~ENGJNEEHED COMPONENTS
AS SPECIFIED
Bl;ARlNG
NAILING
BRIDGING
CUTTING AND NOTCHING (AS PER GODE)
POINT LOADS - SUPPORTED AS PER PLAN
SPAN HANGERS
HEAOEl~S
FRAMED OPENINGS
STAIR ATTACHMENT:
1ST
2~1D
lfil DJ @] [i]
MATERIAL
I.ill DJ
3.
GIRDERS AND BEAMS:
3rio
[ij] DJs1zED PER PLAN
2"b
4TH
1'"
[ii] DJ [fil IT! [JjJ [[] [ii] [j]
[ij] [[] TYPE
[ij] DJ [JjJ DJ [JjJ [[] [ii] IT!
[ij] DJGRADE, SPECIES
[ij] [[] LOCATION ANO RELATION [JjJ DJ ill] OJ [JjJ DJ [JjJ DJ
SIZE
4. FLOORING, SHEATHING, OR DECKING:
1"
2.
FLOOR
[i[J DJ [fil [i]
3""
OTI
DJ
OTIDJ
41H
[JjJ [iJ
[JjJ [iJ
FLOOR
BEARING
NAILING
SPECJAL REQUIREMENTS
[JjJ DJ [fil IT! [fil [j] [fil IT!
[ill DJ [ij] DJ [ij] [[] [ij] DJ
OIJ IJ]
ill] OJ [[J IJJ
U.C.C. F390-1 (rev. 03!09)
lliJ fJJ
EDGE BLOCKING (IF REQUIRED)
GAPPING
LAYOUT
cl·iecl~lls,t
I ! l1ereby certify tl1Bt I Inspected t11!s bufldf11g using... U1ls
and It conf(lrrrnJ tq tl'le released plans lllld
to t~1e requlren1ente oft!·1e Unlfonn Construr.tfon !,.,ode, N.,l.A.C..·. 5;23.
Hesponslble Person !11 Ct1arge of Worlc - - - - - - - - - - - - - - Date:~------
11 Bul.l~ifn.n
lnspec!or
lnlt1dls . _ _ __
Dale: _ _ _ __
PERMIT#
LOT.
BLOCK:
C. WALL FRAMING
1. EXTE:RIOR WALL FRAME::
3110
'! !lT
4;rn
2""
FLOOR
llil [i] llil [i] [[] [i] [[) [iJ
ITI
llil ITl llil ITl llil ITl llil
lliJ
[D
OD [i] OD f±l III IJJ ([] OJ
OD 1JJ III III IJJ
III IJJ OD ITl III ITl ITO IJJ
llil DJ ITO OJ llil OJ ITO OJ
1.
SIZE
SPACE
SPECIES AND GRADE
CUTTING, NOTCHING
AND 80RJNG
HEADER SIZES
JACI.< STUD SEARi.NG
TOP PLATES
llil ill OD DJ
llil OJ OD DJ
ITO [i] III IJJ
OD IJJ OD [i]
lil IJJ [fil [j] NAl.LING
llil IJJ [[J [j] ·LAPS
llil IJJ OD [j] RAFTER TIES
STRAPS
llil IJJ [fil [jJ HURRICANE
(AS REQUIRED)
0. ROOF FRAMING
1. Thuss ROOF FRAMING (As PE:R DESIGN):
APPROVED DOCUME:NlS WHICH SHOW:
lliJ [i] LAYOUT PLANS .
lliJ [JJ TRUSS MEMBrns
[ill IJJ CONNECTION SCHEDULE
@] []
[ill OJ
2. INTERIOR LOAD-BEARING WALLS:
llil [i]
[fil
[fil OJ [fil IJJ [fil
[ill OJ llil ill [ill
@J Ql IIJ
IIJ [j]
llil ill
lil OJ
llil ill
llil DJ
lliJ III
ffi
I
III
OJ llil [iJ llil IJJ [ill IJJ
lill IJJ lill III llil [i] lil DJ
lill m ITiJ III lill DJ llil DJ .
[fil
1ST
SIZE
SPACE
.LAYOUT-SUPPORT
BELOW PER CODE
SPECIES AND GRADE
CUlTING, NOTCHING
AND BORING
FIRE BLOCKING
I-I EADER SrzEs
2""
3"'
4'"
[fil [j] @:] [j] [ijJ OJ [fil [j]
IIJ OJ llil [j] llil [j] @] [j]
[ijJ III [fil [JJ [fil [JJ llil [JJ
[fil OJ [ill OJ [fil OJ [[] ill
[fil
wllil III
III [fil OJ
llil ill lliJ [JJ
[fil
[ill ill llil OJ
[ill OJ llil III
[fil [JJ llil III
FLOOR
SIZE
SPACE
SPECIES AND GRADE
CUTIING, NOTCHING
AND BORING
FIRE BLOCKING
HEADER SIZES
.TOP PLATE NAILING
JACK STUD BEAR.ING
NAILING
LAPS
STRAPPING
2. PERMANENT Thuss-To-Thuss BRACING
(As PE:R DESIGN):
[fil OJ
[fil III
[jjJ [j]
llil [j]
[ij] ill
llil III
Ilil III
@]ill EQUIPMENT/ APPLIANCES ON MANUFACTURER'S DRAWINGS
III SIZE
OD ill GRADES, SPECIES
LAYOUT
OD [JJ SPACING
SIZE
TYPE
NAILING
· [ijJ [jJ SPAN
[ijJ [i] BEARING
OVERLAP
TtRMINATION
ThANS!T!ON (I.E., CROSS) BRACING
3. GABLE END BRACING (AS PE:R DE:SIGN):
ITiJ [j]
ITiJ [j]
OD III
llil [iJ
llil [j]
llil ill
LAYO UT
SIZE
TYPE
NAILING
OVERLAP
4. SOLID SAWN ROOF FRAMING:
[jJ
l_AYOUT
OD III FASTENING
[fil III DAMAGE CAUSED BY FASTENERS
(RAFTERS NOT SPL!T BY TOENAILS)
Oii [J] CUlTING, NOTCHING, AND BORING
[ijJ III BRIDGING
III [JJ RIDGE SIZE
[fil>III 1-JURRICANE TIES WHERE APPLICABLE
TERMINATION
SHEATHING
1. SHEATHING - EXTERIOR WALLS:
2. SHEATHING - Roop:
MATERIAL
MATERIAL
@:] [j]
OJ
llil OJ
lfil OJ
lill OJ
~ ill
n
3. INTERIOR NoN-LOAb·BEARING.WALLS:
FLOOR
TOP PLATES
MANUFACTURER'S DRAWINGS
E.
4.Tfl
:;l""
llil III
llil III
llil III
lil III
lill ITl llil DJ
STRUCTURES ON
lli] [iJ LOCATION AS PER LAYOUT
@] IJ] ALIGNMENT
[i\J [j] BEARING
@J OJ SPACING
lli] OJ CONNECTIONS TO BEARING POINTS
[ill OJ No CONNECT!ON TO NON-BEARING POlNTS
lli] [i] DAMAGE AND DEFECTS
fli] DJ ENGINEERED METHQD OF' REPAIR
OJ
ffiJ [j]
llil III
llil OJ
lfil OJ
llil DJ
PERMANENT BRACING DETAILS
DORMERS/!~OOF
2'"
'!ST
PANEL SPAN, THICKNESS
SPECIAL REQUIREMENTS
[ill OJ GAPPING lli] OJ
[EJ OJ
U.C.C. F390·2 (rev. 03/09)
[fil III
SHEATHING, FRT- ROciF
llil III
[[] OJ
PANEL SPAN, THICKNESS
SPECIAL REQUIREME:NTS
LAYOUT
CORNER BRACING (!F REQUIRED)
[fil OJ
fill OJ
8LOCKJNG, EDGE (IF' REQUIRED)
CLIPS (IF REQUIRED)
Initials:
Hs~p
Pflrntln 1n Charga of Wo1I(
FOUR FEET FROM FIREWALL
NONCORROStVE FASTENERS
[fil ITJGAPPING
[fil IJJ LAYOUT
G11lldlnu tnspoclor