Heavy Duty Antifreeze/Coolant With
Extended Service Interval Technology
Prestone Command
®
Heavy Duty Nitrite Free Extended Life
Antifreeze/Coolant
Prestone Command® Heavy Duty Antifreeze/Coolant is formulated with
advanced corrosion protection technology. This provides an exceptional
SCA pre-charged Extended Service Interval (ESI) Technology
product which is compatible with any conventional
heavy duty coolants and ALL filter technologies.
Prestone Command Heavy Duty Antifreeze/Coolant
is designed for use with ANY antifreeze/coolant
in ANY heavy duty engines used in normal to
severe duty cycles and extreme temperature
conditions. Prestone Command AF/C is available in
Concentrate and Prediluted 50/50 formulas.
WITH EXTENDED SERVICE INTERVAL TECHNOLOGY
SCA PRE-CHARGED
•Advanced corrosion protection technology
•For ANY heavy duty engine
• C
ompatible with ANY conventional heavy duty
antifreeze/coolant and ALL filter technologies
50 /50
SCA
Test
Strip
Specifications and Performance:
Prestone Command Heavy Duty Antifreeze/
Coolant meets or exceeds performance
requirements of the major engine
manufacturer’s and the following industry
specifications: TMC RP329, ASTM D6210,
ASTM D4985, ASTM D3306, SAE J1941
Concentrate
Use Prestone Command HD200 Supplemental Coolant Additive as required to maintain your cooling system.
Stock #
UPC Code
Pack
AFC10000
7 97496-87765 9
6/1 gal.
AFC10000-55
7 97496-87766 6
55 gal. drum
AFC10000-1KL
7 97496-87767 3
264 gal. tote
AFC10100
7 97496-87769 7
6/1 gal.
AFC10100-55
7 97496-87770 3
55 gal. drum
AFC10100-1KL
7 97496-87774 1
264 gal. tote
HD200-16
7 97496-87894 6
12/16 oz.
HD200-64
7 97496-87896 0
6/64 oz.
AFC220-6
7 97496-87875 5
6 Bottles/25 Test Strips
PRESTONE PRODUCTS CORPORATION, 1900 West Field Court, Lake Forest, IL 60045 ©2015 Prestone Products Corporation
HEAVY DUTY ANTIFREEZE/COOLANT WITH EXTENDED SERVICE INTERVAL TECHNOLOGY
FEATURES & BENEFITS
• Low silicate
• Requires no initial Supplemental Coolant Additive (SCA)
• Very low dissolved solids
• State-of-the-art scale preventing additives
• No phosphates
• Universal formula: Heavy duty and industrial applications
APPLICATION
Check engine coolant level frequently and top off with Prestone
Command Heavy Duty ESI 50/50 Prediluted Antifreeze/Coolant as
needed. For flush and fill, use Prestone Command Heavy Duty ESI
Antifreeze/Coolant Concentrate. To ensure success, the system
should be drained and flushed. A 50/50 mix of Prestone Command
Heavy Duty ESI Antifreeze/Coolant is recommended to ensure
proper freezing/boilover protection and to ensure the proper
concentration level of inhibitors, never exceed 70%. There is no
need to use an initial charge of SCA. Check inhibitor levels regularly
or as recommended with Prestone Command AFC220 test strips
and add Prestone Command SCA HD200 as needed. May be used
with or without controlled release filter technology. Always check
the specific maintenance and change-over intervals, antifreeze/
coolant to water ratio, cooling system capacity and service
instructions recommended for your vehicle.
GENERAL DESCRIPTION
Composition
Typical Values
Ethylene Glycol and Inhibitors:
Concentrate
50 vol %
96.8%
51%
Water:
Concentrate
50 vol %
3.2%
49%
Dyes
Trace
Color
Purple/Fuchsia
Odor
Characteristic
Pack/Unit
Jug / Drum / Tote
Average Fluid Weight/Unit
at 68°F (20°C):
Concentrate
50 vol %
9.3 lb (4.2 kg) / gal (3.78 L)
8.9 lb (4.0 kg) / gal (3.78 L)
Freeze-Up
Protection
Boilover
Protection†
40% Prestone Command
60% Water
-12°F
(-24ºC)
221°F
(105ºC)
50% Prestone Command
50% Water
-34°F
(-37ºC)
265°F
(129ºC)
60% Prestone Command
40% Water
-62°F
(-52ºC)
270°F
(132ºC)
70% Prestone Command
30% Water
-84°F
(-64ºC)
276°F
(136ºC)
Protection
(Prestone Command/Water Ration)
Properties
Typical Values
Test Method
Ash, Mass:
Concentrate
50 vol %
0.60%
0.30%
Federal #209B
pH, 50 vol %
10.4
ASTM D1287
Reserve Alkalinity:
Concentrate
50 vol %
6.5 mL
3.2 mL
ASTM D1121
Specific Gravity at 20/20°C:
Concentrate
50 vol %
1.122
1.071
ASTM D1122
Flash Point, 50 vol %
None
Tag Open Cup
Foam Test
65 mL/2.0 sec
ASTM D1881
HANDLING
Keep container closed. In case of spill, clean up quickly as product is
slippery. Flush small spills with water. Large spills, collect into drums
for proper disposal. Dispose of or recycle according to federal, state
or local regulations.
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS
OF THE FOLLOWING SPECIFICATIONS*
Heavy Duty
Automobile
•
•
•
•
•
• ASTM D3306
• ASTM D4340
• Chrysler MS 7170
Section A & B 1-4
• CSMA
• Ford ESE-M97B44-A
Section 3.1.1 & 3.1.2
• GM 1825M and GM 6043M
• SAE J1034
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
ASTM D4985 & D6210
Case Corp. MS1710
Caterpillar Heavy Duty Coolant
CID A-A-52624A
Cummins CES 90T8-4
and 14603
Detroit Diesel 7SE298 and 93K217
EMD M.I.1748E
Ford New Holland 9-86
Freightliner 48-22880
GM 1899M and GM 6038M
John Deere H24A1 & 8650-5
Kenworth R026-170-97
Mack
PACCAR
Navistar B-1
Peterbilt 07-06773
SAE J1941
Thermo-King
TMC RP-302A & RP-329
Volvo GM
Waukesha 4-1974D
* For updated list of
specifications, visit
www.prestonecommand.com
† Using a 15 lb pressure cap in good condition.
Questions? Go to www.prestonecommand.com
or call (888) 282-8960.
www.prestone.com/patents
Reference recycle information from label.
Made in U.S.A.
PA1343
Property of Prestone Products Corporation
PRESTONE PRODUCTS CORPORATION,
1900 West Field Court, Lake Forest, IL 60045
©2015 Prestone Products Corporation
®