Premium Fully Accessible Slatted Ceiling System
NEW!
100% accessibility
Slatted Modules
Up to 2400 long slats
Unique BCA Fire Group 1 Options
Australian Made
www.supawood.com
Why SUPATILE SLAT ?
SUPATILE SLAT is the latest addition to SUPAWOOD’s
popular SUPATILE family of products developed to fit into
the traditional 2-way T-bar grid ceiling system.
Both decorative and sound absorbent, SUPATILE SLAT
will quickly and easily transform any area with an up
market timber or linear look.
Key features:
100% access to ceiling cavity
Simple to specify
Quick and easy to install
Can fit existing ceiling grids with
“Drop-In” fixing option
Panel lengths up to 2400 with “Lift
& Shift” fixing option
Quick & easy fit-out solution
Attractive range of slat profiles
Multi-directional effects possible
Fire Resistant and Green options
www.supawood.com
Premium Fully Accessible Slatted Ceiling System
Fixing Options
SUPATILE SLAT panels come in two fixing options.
Lift & Shift (L&S) is supplied with SUPAWOOD’s own SUPATILE grid system.
DIT (Drop-In Tiles) are designed to fit into an existing grid system.
LIFT & SHIFT
Grid Requirements:
Panel to Panel
Grid is to be SUPATILE GRID with
main runners installed at 600mm
centres with 600mm cross-tees at
1200 or 600mm centres.
When installed as per SUPAWOOD's
instructions the SUPATILE Grid will
s u p p o r t a n y S U PAT I L E S l a t
configuration.
Panel to Panel - end to end
Other Special Features:
5mm end-to-end joints
Standard panels sizes available
1200 x 600
600 x 600
1800 x 600
SUPATILE Slat L&S panels can
“cross over” T-bars, which means a
600 x 600 SUPATILE Grid layout
can be used to create a truly
random panel layout.
1200 x 300
2400 x 600
DIT Drop-In-Tile
Grid Requirements:
Panel to Panel
Existing grid may be repainted
(enamel paint recommended) and
used but must be able to support the
weight of the tiles as well as the
service load factors as prescribed in
the AS2785. Refer to Supawoods
Technical Services Department for tile
weights.
Panel to Panel - end to end
What is required to achieve this will
depend on the specific brand,
system and configuration currently
installed.
25mm end-to-end joints
Standard panels sizes available
1200 x 600
www.supawood.com
600 x 600
1200 x 300
Typically additional support would
be expected to consist of additional
hanger supports but the contractor
is to take independent advice on
this from the supplier of the grid.
Colour Ranges
available
The Range
Fixing System
available
Slat 1
FINISH
CEDAR
Open area 37%
DROP - IN
LIFT & SHIFT
Typical weight 11kg/m2
Slat 2
FINISH
2
CEDAR
DROP - IN
LIFT & SHIFT
Open area 20.8%
Typical weight 13kg/m
If Driftwood, slats are 90x20mm with a 30mm gap
Slat 3
FINISH
CEDAR
Open area 58%
Typical weight 12kg/m
DROP - IN
LIFT & SHIFT
2
Slat 4
FINISH
CEDAR
Open area 57%
Typical weight 15kg/m
DROP - IN
2
Slat 5
FINISH
DROP - IN
CEDAR
Open area 76%
Typical weight 15kg/m
www.supawood.com
2
LIFT & SHIFT
AUS 1800 002 123
UK 0845 347 0026
Concept Veneers & Colours
Hoop Pine SF
Fusion Maple SF
Smooth Mahogany SF
Cracked Cherry SF
Euro Beech SF
White SF
Tasmanian Oak SF
Spotted Gum SF
Matt Silver SF
Black SF
The Rustic Timber Lining
NOTE: DRIFTWOOD is a special rustic finish.
Please refer to the DRIFTWOOD brochure for features to be expected... click here
Driftwood Clear Vic Ash
CEDAR
Driftwood White
Driftwood Black
Driftwood White washed
Driftwood Black washed
Natural Timber
This shows the range
of colours that can be
expected with cedar.
“...love the colour
variation in the timber.”
LH - KPA, Perth
Colours shown in these swatches are a guide only and actual will vary from panel to panel.
Driftwood and Cedar finishes in particular are natural products and there will be variations between slats.
www.supawood.com
Premium Fully Accessible Slatted Ceiling System
Suggested Specification Wording
Ceiling to be SUPATILE SLAT slatted ceiling system.
Panels to be SUPATILE [select option number] with
[Drop in/ Lift & Shift] fixing option.
Panel finish type to be [SUPAFINISH/DRIFTWOOD/
CEDAR] in [specify colour here].
Grid finish to be black.
Typical panel size to be [1200x600/600x600/........./ as
shown on RCP].
[Delete if not required] Lay HP50 Jet Black bulk
insulation over ceiling panels/Ceiling and all services
above to be painted out black.
Panels to be Fire Group 3 / 2 / 1 [delete as required] as
per BCA clause C1.10a. [Note that fire groups 1 and 2
are only available in the SUPAFINISH finish type.]
Panel installation to be as per manufacturer's
instructions and AS/NZS 2785.
For complete unabridged Spec Wording in Word format...click here
For more product information:
"Global technology and know-how. Local manufacture and support."
SUPAWOOD produce an extensive range of market-leading lining systems and look
forward to helping you on your next project.
Website: www.supawood.com
SUPAWOOD Head Office
Australasian Support and Manufacturing
Phone: +61 1800 002 123
Email: [email protected]
SUPAWOOD UK
UK & EU Support and Manufacturing
Phone: +44 (0) 845 347 0026
Email: [email protected]
Front Cover:
SUPATILE SLAT 2 Lift & Shift in CEDAR Clear used to enhances the
ceilings of a commercial lift lobbies.
Back Cover from top:
SUPATILE SLAT 2 Lift & Shift in SUPAFINISH Tas Oak.
SUPATILE SLAT 5 Lift & Shift in SUPAFINISH White 1100.
SUPATILE SLAT 1 LIft & Shift in SUPAFINISH Spotted Gum.
SUPATILE SLAT 3 Lift & Shift in SUPAFINISH in Cracked Cherry.
Inside Front Cover from Top:
SUPATILE SLAT Lift & Shift in DRFITWOOD Clear Vic Ash forms an
interesting centre feature in the ceiling of a corporate HQ office area.
SUPATILE SLAT Lift & Shift option 5 in DRIFTWOOD Black forms a
striking ceiling in a corporate HQ reception and hallway.
SUPATILE SLAT Lift & Shift option 5 in SUPAFINISH Tasmanian Oak
defines the areas of a university science faculty study area.
SUPATILE SLAT 4 DIT in SUPAFINISH Hoop Pine in Commercial
Fitout, Perth.
SUPATILE SLAT 5 DIT in SUPAFINISH White & SUPACOLOUR
Yellow enhance the decor colour scheme of a staff lounge area.
Inside Spread on left from top:
SUPATILE SLAT 2 Lift & Shift in CEDAR Clear.
SUPATILE SLAT 2 Lift & Shift in SUPAFINISH Tas Oak.
SUPATILE SLAT 4 DIT in SUPAFINISH Hoop Pine.
www.supawood.com