UCP Series Modular Custom Panel System
Build Your Own Custom Connector Panel Using Off-The-Shelf Components!
Design and build your own custom connector panels using off-the-shelf materials! Our
UCP Series modular custom panel system assembles quickly and easily using either a 2 or
4 space frame kit and your selections from an extensive collection of prepunched modules.
UCP modular assemblies simply bolt together using supplied hardware. A single tier of five
modules bolts across a 2 space frame kit, two tiers of five modules bolt across a 4 space
frame kit.
Modules are prepunched to accept XLR, Neutrik, Elco, Canare and a host of other
connector configurations (see accompanying diagrams). The inherent strength of the
interlocking system eliminates panel deflection while inserting or removing connectors.
When completed, all hardware is flush to create a professional appearance with no
unsightly gaps. Visible parts have a black brushed and anodized finish. All modules are
constructed of aluminum. Blank and vented panels are also available to fill unused spots.
UCP System
UCP Series Modular Custom Panel System
FK2
Frame Kits
Bolt modules to them in any combination.
UCPB1
typical construction
Part #
Racking Height
FK2
3-1/2” (2 rackspace)
FK4
7” (4 rackspace)
Blank Module
UCP Vent
UCP-ADP
UCPB1
UCPB2
UCPB3
UCP-VT
Available for filling unused spots or drill your
own connector mounting pattern.
Part # Width
Part # Width
Part # Width
UCPB1
UCPB2 double
UCPB3
single
UNIV1
UNIV2
UNIV3
UNIV4
Fills unused spaces while
providing ventilation.
Adapts any single UCP module to
a standard 1900 electrical box.
Part #
Part #
UCP-VT
UCP-ADP
triple
Universal XLR Female Punchouts
Circular Flange
UNIV6
Fits Neutrik FP, MP, MDL, FDL, small Speakon, Switchcraft female XLRs,
Cannon, Whirlwind (male XLRs fit as well, but leave a small gap on sides).
4SC1
3/8BANA2
3/8BANA4
3/8BANA6
BANA2
Fits dual banana jack receptacles
requiring up to 3/8” hole
middleatlantic.com • V: 800-266-7225 • F: 800-392-3955
XLR Style Male Punchouts
XLRM6
4SC3
4 Bolt Punchouts: Fits Cannon AP and EP,
Neutrik, NL8MPR, NL4MPR (“Speakon”).
Banana Jack Punchouts
162
UCP Electric Box Adapter
Fits Neutrik MP, LNEMP,
Switchcraft, Cannon.
Combo Female/Male XLR Punchouts
BANA4
BANA6
Fits the universal dual banana jack
receptacle requiring a 1/2” hole.
COMBO2
COMBO4
COMBO6
Fits mixed genders
within a module.
UCP Series Options
UCP Fan
UCP FK2 Swinging Frame
Extend equipment life by removing heat from within an enclosure. Operates on 12VDC
using integral 12” long pigtail leads, includes power supply.
This hinged version of the FK2 frame kit allows
rear access to modules. Captive 10-32 threaded
thumbscrews hold the frame closed and require
no tools to open. Kit includes a pair of threaded
FK bars, hinged ear, captive thumbscrew ear,
and all module mounting hardware. Occupies 2
rackspaces (3-1/2”).
UCP-FAN
mounted in FK2
Part #
UCP-FAN
UCP-FAN shown
mounted in UCP-CH
UCP-FAN
Free Air dB Rating Free Air CFM
25 dBA
15
UCP-SF
Part #
UCP-SF
UCP Chassis
UCP Cable Tray
The 2 space UCP chassis holds five modules in the front, and five modules in the rear.
Shipped fully-assembled, each unit is comprised of four threaded FK bars, a pair of ears
9” deep, top and bottom, and all necessary module mounting hardware.
The top & bottom can be easily removed,
leaving the frame intact.
The UCP cable tray includes FK2 bars, mounting ears and bottom. 5” deep tray provides superior
cable strain relief with a multitude of wire-tie slots. Occupies 2 rackspaces (3-1/2”).
Part #
UCP-CH
Part #
UCP-CT
UCP-CH
“DB” Style Punchouts
1DB9
1DB15
2DB9
2DB15
3DB9
1DB25
Multipin Elco/Edac Punchouts
4DB9
2DB25
2DB37
1ELCO38
2DB50
1ELCO56
2ELCO38
Fits the popular data multipin. 1DB9M fits HD15(SVGA) and additional
1/8” mini phone jack for easy laptop connection.
1ELCO90
2ELCO56
1/4X2, 3/8X2
1/4” - fits RCA jacks,
some switches
and LEDs.
1/4X4, 3/8X4, 7/16X4
CANARE4
Fits regular and
feed-through types.
Multipin Whirlwind
Punchouts
1W1
1W2
Fits 39 and 61 pin.
3/8X6
3/8X8
KEY-1
Fits 1/2” and 3/8” diameter BNC shells,
most insulated shells and fuses.
KEY-2
Duplex Receptacle
Punchouts
DUP1
DUP2
Removal of receptacle ears is necessary to
fit between UCP bars.
KEY-4
RPS Series
KEY-6
UCP-RPS
Accommodates a variety of connectors including RCA,
RJ 11/12/45, F, BNC feed through, Banana, ST Fiber, etc.
(keystone insert bezel not required for connector installation)
Remote power
switch (see pg.
115 for info.)
Twistlock
Punchouts
TW2B
1G3
Fits “G” Series
connectors by AMP.
1/2BNC3
1ELCO90
1/2BNC4, 3/8BNC4
Multipin “G” Series
Punchouts
1G2
1/2BNC2
Keystone Punchouts
3/8X5
1G1
1/2BNC1
Fits 38, 56, 90 and 120
pin Elco/Edac connectors.
3/8” - fits attenuators, “F” Fits 3/8” insulated
7/16” - fits Switchcraft
connectors, phone jacks, RCA connectors for #11, insulated phone jack,
component video & audio.
some switches.
some switches.
BNC Recessed Canare
Panel Punchouts
1ELCO120
2ELCO90
1/4”, 3/8”, 7/16” Punchouts
3/8X1
BNC Punchouts
UCP Series Options
1DB9M
UCP-CT
TW3B
Fits most brands with oval mounting hole pattern (Hubbel Bryant, etc.) Use Part #TW2B for
2 bolt twistlocks and other 2 bolt devices. Use Part #TW3B for 3 bolt twistlocks.
Socapex
19 Pin
DL Series Multipins,
by Cannon
1/2” Diameter
“D” Punchouts
SPX-19
2DL96
1/2BNC5
19 pin.
DL Series multipin.
Fits 1/2” insulated BNC
connectors for RGBHV.
2011–2012 Master Catalog • EXCEPTIONAL SUPPORT & PROTECTION™
163