13
20
Furniture & Equipment for the Medical World
PORTERING
CHAIRS
Portering Chairs
Rear Steer, Sliding Foot Rest
02
BS 5852:2006
Portering Chair - Rear Steer, Nesting, Sliding
Foot Rest
Features
Other Frame
Colours Available
•
•
•
•
•
•
•
•
•
Nests to occupy reduced floor space and encourage tidy storage
Seamless & contoured upholstery using flame retardant vinyl
Moulded drop down arm rests allows side access for patients and helpers
Sliding rubber foot rest aids access as well as supporting feet during transit
X-ray/notes pocket on rear of seat
Two hooks for patients belongings
Fittings to accept IV poles/cylinder holders mounted to rear uprights
200mm fixed wheels/150mm total stop braking castors (cushioned)
Maximum load 190kg
Dimensions (w x d x h)
•
•
•
Overall Dimensions - 660 x 840 x 1040mm
Seat - 540 x 420mm at Height 530mm
Back - 490 x 455mm
Standard Colours
•
•
Paint - Grey
Upholstery - Bristol Blue
Options
•
•
•
•
•
•
•
•
G/200/RS/BB
Service Contract Available
Please Contact Customer Services
cific
Trust Spe
Labeling
.
Available
Us
Contact
Alternative colours are available. Change suffix ‘BB’ on the product code with any of the following i.e.
Rear Steer Portering Chairs - Inter-Nesting, Sliding Foot Rest in Aqua Marine - G/200/RS/AQ
Bristol Blue
Aqua Marine
Forest Green
Flame Red
Granite Blue
Graphite
Onyx Black
Sand Dune
BB
AQ
FG
FR
GB
GH
OB
SD
email: [email protected]
fax: +44 (0)1258 455056
CYHP/D1 - Cylinder Holder, CD/D
CYHP/E1 - Cylinder Holder, E
G/CLS - Calf/Leg Supports (pair)
G/DP - Infusion Pole
G/SB - Lap Seatbelt
G/CARD/STATION - Head of Station
G/CARD/LOCK - Card/Coin Lock,
Factory Fitted
2LOKE011 - Release Card
Item
Description
Weight
G/200/RS/BB
Portering Chair - Rear Steer, Nesting, Sliding Foot Rest
29.0kg
Portering Chairs
Front Steer, Hinged Foot Rests
03
BS 5852:2006
Portering Chair - Front Steer, Nesting, Hinged
Foot Rests
Features
•
•
•
•
•
•
•
•
•
Nests to occupy reduced floor space and encourage tidy storage
Seamless & contoured upholstery using flame retardant vinyl
Moulded drop down arm rests allows side access for patients and helpers
Folding/hinging foot rests aids access as well as supporting feet during transit
X-ray/notes pocket on rear of seat
Two hooks for patients belongings
Fittings to accept IV poles/cylinder holders mounted to rear uprights
125mm swivel castors/200mm braking fixed wheels (cushioned)
Maximum load 190kg
Other Frame
Colours Available
Overall Dimensions (w x d x h)
•
•
•
Overall Dimensions - 685 x 710 x 1040mm
Seat - 540 x 420mm at Height 530mm
Back - 490 x 455mm
Standard Colours
•
•
Paint - Grey
Upholstery - Bristol Blue
Options
•
•
•
•
•
•
•
•
CYHP/D1 - Cylinder Holder, CD/D
CYHP/E1 - Cylinder Holder, E
G/CLS - Calf/Leg Supports (pair)
G/DP - Infusion Pole
G/SB - Lap Seatbelt
G/CARD/STATION - Head of Station
G/CARD/LOCK - Card/Coin Lock,
Factory Fitted
2LOKE011 - Release Card
G/205/FS/BB
e
See Pag
180 For
Options
Service Contract Available
Please Contact Customer Services
Alternative colours are available. Change suffix ‘BB’ on the product code with any of the following i.e.
Front Steer Portering Chairs - Inter-Nesting, Hinged Foot Rests in Aqua Marine - G/205/FS/AQ
Item
Description
Weight
Bristol Blue
Aqua Marine
Forest Green
Flame Red
Granite Blue
Graphite
Onyx Black
Sand Dune
G/205/FS/BB
Portering Chair - Front Steer, Nesting, Hinged Foot Rests
27.5kg
BB
AQ
FG
FR
GB
GH
OB
SD
Sales Hotline: +44 (0)1258 484455
www.bristolmaid.com
Portering Chairs
Options
04
Cylinder Holders
Features
•
•
•
e 47
See Pag
der
For Cylin
all
Holder W
Plate
Compatible with 100mm
diameter cylinders (C/
CD/D/E)
Mounts to IV support tube
at rear of chair using a
handwheel
Compatible with G/200/RS
& G/205/FS models
Calf/Leg Support - Pair
•
•
Standard Colours
•
Infusion Pole
Features
•
Moulded calf/leg support on captive retractable support
tube
Positions beneath the seat when not in use
Compatible with G/200/RS & G/205/FS models
Standard Colours
Paint - Grey
Features
•
Stainless steel infusion pole with a U shaped hook
(length of pole 980mm)
Mounts to IV support tube at rear of chair using a
handwheel
Compatible with G/200/RS, G/205/FS & G/500/RS
models
•
•
Item
Description
Weight
•
Stainless Steel/Black
CYHP/D1
C/CD/D Size
1.0kg
Item
Description
Weight
Item
Description
Weight
CYHP/E1
E Size
1.8kg
G/CLS
Calf/Leg Support - Pair
2.3kg
G/DP
IV Pole
1.1kg
Card/Coin Lock
Wall Bracket Head of Station
Card/Coin Lock
Lap Seatbelt
Features
•
•
Lap seat belt with snap buckle
Compatible with G/200/RS & G/205/FS models
Standard Colours
•
Black
Features
Features
•
•
•
•
•
•
•
Operates using a £1 coin (Euro version available)
Coin/Card remains in the lock until the chair is
connected to another chair or the head of station
Plastic release card available for use by porters
Factory fitted
Compatible with G/200/RS, G/205/FS & G/500/RS
models
Item
Description
Weight
•
•
•
Head of station for chairs fitted with card/coin locks
Requires fitting to the fabric of the building (wall fixings
not supplied)
Chain length 1000mm
One required for each row of chairs, (G/200/RS &
G/205/FS), each chair (G/500/RS)
Compatible with G/200/RS, G/205/FS & G/500/RS
models
Item
Description
Weight
G/CARD/LOCK
Card/Coin Lock, Factory Fitted
1.0kg
Item
Description
Weight
G/SB
Lap Seatbelt
0.4kg
2LOKE011
Plastic Release Card
0.01kg
G/CARD/STATION
Head of Station
1.6kg
email: [email protected]
fax: +44 (0)1258 455056
Portering Chairs
05
DRUG &
MEDICINE
STORAGE &
DISPENSING
Page 77
Page 80
Page 88
Page 93
RA NEW
NG
E
Page 68
STORAGE
SOLUTIONS
Page 122
Page 132
Page 131
Page 134
Page 232
Sales Hotline: +44 (0)1258 484455
www.bristolmaid.com
Portering Chairs
Front Steer, Sliding Foot Rest
06
BS 5852:2006
Portering Chair - Front Steer, Nesting, Sliding
Foot Rest
Features
Other Frame
Colours Available
•
•
•
•
•
•
•
•
•
Nests to occupy reduced floor space and encourage tidy storage
Fitted with a braking mechanism to provide assistance during transportation*
(model dependant)
Seamless & contoured upholstery using flame retardant vinyl
Moulded drop down arm rests enables side access for patients and helpers
Sliding rubber foot rest aids access as well as supporting feet during transit
X-ray/notes pocket on rear of seat
Fittings to accept IV poles/cylinder holders mounted to rear uprights
125mm swivel castors/200mm braking fixed wheels (cushioned)
Maximum load 190kg
Dimensions (w x d x h)
•
•
•
GT100/BB shown with optional cylinder
holder, calf/leg supports, iv pole & lap
seatbelt
Overall Dimensions - 685 x 710 x 1040mm
Seat - 540 x 420mm at Height 530mm
Back - 480 x 610mm
Standard Colours
•
•
Paint - Grey
Upholstery - Bristol Blue
Options
•
•
•
•
•
•
•
•
GT901 - Cylinder Holder, D/E
GT902 - Calf/Leg Supports (pair)
GT903 - IV Pole
GT904 - Lap Seatbelt
GT905 - Rectractable Seatbelt
G/CARD/STATION - Head of Station
G/CARD/LOCK - Card/Coin Lock, Factory Fitted
2LOKE011 - Release Card
GT100/BB braking handle
GT110/BB Shown
with optional cylinder
holder GT901
Service Contract Available
Please Contact Customer Services
Item
Alternative colours are available. Change suffix ‘BB’ on the product code with any of the following i.e.
Rear Steer Portering Chairs - Inter-Nesting, Sliding Foot Rest in Aqua Marine - GT110/AQ
cific
Trust Spe
Labeling
.
Available
Us
Contact
Description
Bristol Blue
Aqua Marine
Forest Green
Flame Red
Granite Blue
Graphite
Onyx Black
Sand Dune
GT100/BB Portering Chair - Front Steer, Nesting, Sliding Foot Rest,
Assisted Braking
BB
AQ
FG
FR
GB
GH
OB
SD
GT110/BB Portering Chair - Front Steer, Nesting, Sliding Foot Rest
email: [email protected]
fax: +44 (0)1258 455056
Weight
27.5kg
26.0kg
Portering Chairs
Options
07
Calf/Leg
Support - Pair
Cylinder Holders
Features
Features
•
•
•
•
•
Compatible with 100mm diameter cylinders (D/E)
Mounts to rear of chair
Cylinder locked in position using a handwheel
Compatible with GT100 & GT110 models
Infusion Pole
Moulded calf/leg support on captive retractable support
tube
Positions beneath the seat when not in use
Compatible with GT100 & GT110 models
•
•
Standard Colours
Standard Colours
•
•
Paint - Grey
Features
•
Stainless steel infusion pole with a U shaped hook
(length of pole 1160mm)
Mounts to IV support tube at rear of chair using a
handwheel
Compatible with GT100 & GT110 models
•
•
Stainless Steel/Black
Item
Description
Weight
Item
Description
Weight
Item
Description
Weight
GT901
D/E Size
1.0kg
GT902
Calf/Leg Support - Pair
2.3kg
GT903
IV Pole
1.5kg
GT904
GT905
Card/Coin Lock
Wall Bracket Head of Station
Seatbelts
Card/Coin Lock
Features
Features
Features
•
•
•
•
•
•
Lap seat belt (snap buckle) or retractable reel shoulder
seatbelt
Compatible with GT100 & GT110 models only
Standard Colours
•
Black
•
•
•
Operates using a £1 coin (Euro version available)
Coin/Card remains in the lock until the chair is
connected to another chair or the head of station
Plastic release card available for use by porters
Factory fitted
Compatible with GT100 & GT110 models
•
•
•
Head of station for chairs fitted with card/coin locks
Requires fitting to the fabric of the building (wall fixings
not supplied)
Chain length 1000mm
One required for each row of chairs
Compatible with GT100 & GT110 models
Item
Description
Weight
Item
Description
Weight
GT904
Lap Seatbelt
0.4kg
G/CARD/LOCK
Card/Coin Lock, Factory Fitted
1.0kg
Item
Description
Weight
GT905
Shoulder Seatbelt
0.5kg
2LOKE011
Plastic Release Card
0.01kg
G/CARD/STATION
Head of Station
1.6kg
Sales Hotline: +44 (0)1258 484455
www.bristolmaid.com
Portering Chairs
Bariatric, Rear Steer, Sliding Foot Rest
08
BS 5852:2006
Portering Chair - Bariatric, Rear Steer,
Sliding Foot Rest
Features
Other Frame
Colours Available
380kg
load
capacity
•
•
•
•
•
•
•
•
•
•
•
Designed to carry patients up to 380kg
Seamless & contoured upholstery using flame retardant vinyl
Moulded drop down arm rests allows side access for patients and helpers
Sliding rubber foot rest aids access as well as supporting feet during transit
X-ray/notes pocket on rear of seat
Two hooks for patients belongings
Fittings to accept IV poles mounted to rear uprights
Retractable diagonal seatbelt
200mm fixed wheels/200mm total stop braking castors (cushioned)
We recommend that two members of staff are in attendance when used with a
patient in excess of 190kg
Maximum load 380kg
Dimensions (w x d x h)
•
•
•
Overall Dimensions - 930 x 1000 x 1000mm
Seat - 740 x 670mm at Height 530mm
Back - 700 x 480mm
Standard Colours
•
•
Paint - Grey
Upholstery - Bristol Blue
Options
•
•
•
•
•
•
G/500/CYL - Cylinder Holder, CD/D
G/CLS/500 - Calf/Leg Supports (pair)
G/DP - Infusion Pole
G/CARD/STATION - Head of Station
G/CARD/LOCK - Card/Coin Lock, Factory Fitted
2LOKE011 - Release Card
G/500/RS/BB
Service Contract Available
Please Contact Customer Services
cific
Trust Spe
Labeling
.
Available
Us
Contact
Alternative colours are available. Change suffix ‘BB’ on the product code with any of the following i.e.
Rear Steer Portering Chairs - Bariatric, Sliding Foot Rest in Aqua Marine - G/500/RS/AQ
Bristol Blue
Aqua Marine
Forest Green
Flame Red
Granite Blue
Graphite
Onyx Black
Sand Dune
BB
AQ
FG
FR
GB
GH
OB
SD
email: [email protected]
fax: +44 (0)1258 455056
Item
Description
Weight
G/500/RS/BB
Portering Chair - Bariatric, Rear Steer, Sliding Foot Rest
43.8kg
Portering Chairs
Options
09
Calf/Leg Support - Pair
Cylinder Holders
Features
Features
•
•
•
•
•
Compatible with 100mm diameter cylinders (C/CD/D)
Mounts to underside of seat, is accessible from the rear
of the chair
Maximum 2 per chair
Compatible with G/500/RS model
•
•
Infusion Pole
Moulded calf/leg support on captive retractable support
tube
Positions beneath the seat when not in use
Compatible with G/500/RS model
Standard Colours
•
Features
•
•
•
Stainless Steel/Black
Stainless steel infusion pole with a U shaped hook
(length of pole 980mm)
Mounts to IV support tube at rear of chair using a
handwheel
Compatible with G/200/RS, G/205/FS & G/500/RS
models
Item
Description
Weight
Item
Description
Weight
Item
Description
Weight
G/500/RS/CYL
C/CD Size
1.0kg
G/CLS/500
Calf/Leg Support - Pair
2.3kg
G/DP
IV Pole
1.1kg
Card/Coin Lock
Card/Coin Lock Wall Bracket
- Head of Station
Features
Features
•
•
•
•
•
•
•
Operates using a £1 coin (Euro version available)
Coin/Card remains in the lock until the chair is
connected to another chair or the head of station
Plastic release card available for use by porters
Factory fitted
Compatible with G/200/RS, G/205/FS & G/500/RS
models
•
•
•
Head of station for chairs fitted with card/coin locks
Requires fitting to the fabric of the building (wall fixings
not supplied)
Chain length 1000mm
One required for each row of chairs (G/200/RS &
G/205/FS), each chair (G/500/RS)
Compatible with G/200/RS, G/205/FS & G/500/RS
models
Item
Description
Weight
G/CARD/LOCK
Card/Coin Lock, Factory Fitted
1.0kg
Item
Description
Weight
2LOKE011
Plastic Release Card
0.01kg
G/CARD/STATION
Head of Station
1.6kg
Sales Hotline: +44 (0)1258 484455
www.bristolmaid.com
General Information
Dimensions & Weight
Stainless Steel
•
•
•
•
•
•
•
•
Dimensions are stated in millimetres (width x depth x height)
Weights are stated in kilograms
Please ensure you are aware of the item size and weight prior to ordering
Castors
•
•
•
•
•
All castors are fitted with non-marking tyres (with the exception of some antistatic versions)
Anti-static castors can be identified by a yellow thread guard or a yellow mark
on the edge of the tyre
Castors are selected to suit the anticipated use of the trolley/piece of
equipment
Castors and wheel bearings do not require specific maintenance other than
regular cleaning. The use of oil will breakdown the grease applied to the
bearings, reducing the life of the castor. We recommend that fittings are checked
regularly and re-tightened as required
Where anti-static castors are fitted, we recommend that the tyre is periodically
cleaned to remove any dirt to ensure a good contact between the tyre and the
floor
•
•
•
Locks should operate smoothly. If they do not, please arrange urgent attention
and where necessary obtain a replacement
Locks require only minimal maintenance and should only be lubricated using a dry
lubricant such as graphite which can be purchased from most locksmiths (NEVER
USE OIL)
When ordering replacement locks or keys, please ensure that the product code,
and any letters/numbers from the key and lock are available
•
We only use lead-free epoxy/polyester powder paint
Where possible colours are applied in special booths to allow for overspray to be
recycled
Alterative colours are available, this may be incur a small surcharge
email: [email protected]
•
•
•
•
fax: +44 (0)1258 455056
Wood products are manufactured from FSC accredited materials
• High pressure laminate bonded to MDF
• Melamine faced MDF
Edges are protected with 2mm ABS/T-Barb edging or sealed with varnish
Both laminate and melamine panels offer some resistance to water penetration
under normal usage
We only use water based adhesives and varnishes
Upholstery
•
•
Upholstered panels are manufactured from ‘Flame Retardant’ materials,
independently tested to ‘BS5852 Ignition Source 5’ (BS7176 Medium Hazard)
Vinyl’s offer resistance to:
• Melsept SF - Code CH - B:4422M32 (0.5% / 5%)
• Hexaquart S - Code CH - B:406432 (1.5% / 5%)
• Meliseptol - Code CH - B:4273M92 (Undiluted)
All foam is ‘Fire Retardant’ and free of ‘Hexa-Bromo-Cyclo-Dodecane’
Latex
•
Paint
•
•
Laminate & Wood Products
•
Locks & Keys
We use 304 and 430 grade stainless steel
Grade 304 is non-magnetic and used on products which are not painted
Grade 430 is magnetic and used on painted products
Other grades are available on request, i.e. 316
Please note that the term ‘stainless’ is not entirely accurate, as certain chemicals
can ‘eat’ into the surface. In particular ‘iodine’ which can badly corrode/stain and
as a result should not be used as a cleaning agent
All products are latex free
General Information
Standards & Symbols
Cleaning
Signifies that the product conforms
with applicable European directives
Meets appendix A (Stability
Requirements) of BS3619:1976 Mobile
Infusion Stands
Signifies that the product has been
tested to European standards for
electromagnetic compatibility
Meets BS4068: 1977 Specification
for hospital trolleys for instruments,
dressings and for anaesthetists’ use
Signifies that the product does not
use any hazardous substances in its
electrical components
Meets BS1765: Part 1: 1990
Specification for general purpose
bedside lockers for patients (with the
exception of door hinges which are
more robust and practical)
•
The maintenance of high standards of cleanliness on all surfaces and
equipment is a crucial factor in the prevention and control of infection. Whilst
dust, dirt and moisture can harbour infection, the key risks are associated
with contamination arising from contact with blood, body fluids, mucous
membranes and damaged skin. In all cases surfaces must be thoroughly
cleaned and disinfected in order to destroy pathogenic micro organisms.
•
Bristol MaidTM products have been designed for use in demanding
environments; full cleaning instructions can be downloaded from
www.bristolmaid.com
WEEE Regulations
Hospital Metalcraft meets its obligations as a business to business producer of
Electrical and Electronic Equipment (EEE) through:
•
Flame Retardant
Meets BS2483:1977 Specification for
overbed tables
Resistant to Cold Liquids
Five Pin - BS3621 Anti Pick & Drill, Key
Retaining Five Pin Cylinder Lock
Resistant to Mechanical Damage
Six Pin - BS3621 Anti Pick & Drill, Key
Retaining Six Pin Cylinder Lock
Department of Health Green Book
Independently tested to BS2881: 1989
(Security Level One) Specification
for Cupboards for the Storage of
Medicines in Health Care Premises
•
•
Independently tested to UN3291
- Certificate of Packaging
Performance for the Transportation
of Clinical Waste
•
Membership of the Veolia Environmental Services WEEE, (Waste Electrical
and Electronic Equipment), Producer Compliance Scheme (Registration No.
WEE/KE0677RX)
Marking EEE placed on the market by Hospital Metalcraft with the mandatory
crossed out wheeled bin symbol and Bristol Maid logo
Making information available, (for EEE placed on the market after April 2007),
to assist those engaged in treatment, recovery and recycling activities
Arranging for the collection, treatment, recovery and environmentally sound
disposal of obligated WEEE
Customers are advised that infected medical devices are not included within the
scope of the WEEE Regulations and that arrangements described above do not
extend to such products
Bristol Maid website (www.bristolmaid.com) and Terms & Conditions refer
Meets The Misuse of Drugs (Safe
Custody) Regulations 1973
Sales Hotline: +44 (0)1258 484455
www.bristolmaid.com
How to Order
Laminate Colours
Paint Colours (Lead-free Epoxy/Polyester)
White
Red
Spearmint
Signal Yellow
Signal Blue
Signal Green
Black
Orange
Purple
Light Grey
Signal Blown
Upholstery Colours (Flame Retardant)
Cream Claro
Lagon
Chene de Meymac
Charme d’Amboise
Bianco Especial
Melamine
Granite Blue
Sand Dune
Forest Green
Graphite
Bristol Blue
Flame Red
Aquamarine
Onyx Black
Ivory
Spearmint
Beech
Please note that due to discrepancies with colour reproduction the shades depicted here may differ slightly from the finished product
email: [email protected]
fax: +44 (0)1258 455056
Gris Paloma
How to Order
How To Order
Custom Design & Manufacture
•
•
If you have been unable to find a product that exactly meets your
requirements, then please contact us so we can work together to
develop a solution that will exactly match your needs. Our design
capability allows us to provide everything from minor product
specification changes through to a full design & development service.
•
•
•
•
•
•
•
•
All orders are required in writing, either by fax, email or post. Unfortunately we cannot accept orders over the phone
Orders should be submitted as an ‘official purchase order’ on company headed paper. All information should be clearly
displayed
Your order should contain the following - invoice address, delivery address, full contact details (name, phone & fax number)
item codes along with descriptions and prices
If applicable, please ensure our quote number is detailed on your order to ensure any agreed discounts are applied
Item codes and descriptions in this catalogue supersede all previous editions
A full price list can be requested from our website
Payments can be made by cheque, bank transfer or credit/debit card (with the exception of American Express)
If you are a new customer, the first three orders will be processed on a proforma basis, paid in full prior to manufacture &
delivery, after which a credit account may be applied for
For our terms and conditions refer to www.bristolmaid.com
For further information and assistance, please contact our customer services team on +44 (0) 1258 484455
Tenders & Contracts
Bristol Maid™ has wide ranging experience in the facilitation and project management of tenders and contracts. Through many
years’ experience we are uniquely placed to support our customers in the selection, delivery, installation and commissioning of
both large and small projects.
To discuss your tender or contract requirements please contact our Customer Services Team.
•
•
•
•
•
•
Site audit and equipment recommendations
Full project management
Scheduled deliveries
Product placement and removal of packaging
Installation and commissioning
Training
Preventative Maintenance, Spares & Service Support
Bristol Maid™ products are designed and manufactured to meet the demands of everyday use, with the majority of our products
under normal conditions providing many years of trouble free service.
Where annual maintenance or periodic inspections are required, we are able to offer comprehensive planned preventative
maintenance through a scheduled service contract or call out by our own trained Engineers. For your peace of mind and continued
product reliability, please contact our customer service team for details on the following services.
•
•
•
Preventative maintenance contracts & packages
Supply of spare parts
Site audit and equipment recommendations
Sales Hotline: +44 (0)1258 484455
www.bristolmaid.com
Meet The Team
Sales Director
Sales Representatives
Ian Farnfield
01258 451338
[email protected]
Chris Farmer
07768 057675
[email protected]
National Sales Manager
Steve Poller
07711 095899
[email protected]
Jeremy Russell
07889 659611
[email protected]
Sales Support
Paul Open
Technical Services Manager
01258 451338
James Maplethorpe
07887 534755
Ian Mills
Sales Support Engineer
South
07921 473241
Tim Pascoe
07725 543862
[email protected]
[email protected]
[email protected]
[email protected]
Eric Hornby
Sales Support Engineer
North
07702 000953
[email protected]
email: [email protected]
fax: +44 (0)1258 455056
John Baines
07876 441477
[email protected]
Meet The Team
Customer Services
Lauren Amos
Customer Service Team Leader
[email protected]
Sam Newton
Assistant Customer Service
Team Leader
[email protected]
Mark Champion
Customer Service Co-ordinator
[email protected]
Tracy Jackson
Customer Service Co-ordinator
[email protected]
Jo Barnwell
Customer Service Assistant
[email protected]
Export
Ben Spreadbury
Customer Service Assistant
[email protected]
Chris Morgan
Export Sales Manager
+44 (0)7917 207617
[email protected]
Trudy Cole
Export Co-ordinator
[email protected]
Sales Hotline: +44 (0)1258 484455
www.bristolmaid.com
Welcome to the Latest Edition of the Bristol Maid™ Medical Furniture & Equipment Catalogue
Based in Blandford Forum, Dorset we design, manufacture and distribute the extensive range of Bristol Maid™ medical furniture together with other complimentary products from
selected partners. With a broad portfolio and a comprehensive support team we are proud to provide a responsive and flexible service to meet our customer’s needs.
With over 60 years experience, the Bristol Maid™ brand has become synonymous with quality, durability and reliability, with a wide range of customers including the NHS, Private
Healthcare Sector, Pharmacies and a growing network of Distributors throughout the UK, Ireland and many other countries around the world.
Working with our customers we are continually developing and enhancing our product ranges to ensure that they are fit for purpose, easy to use, reliable and above all represent
value for money. We hope that you find this catalogue useful and welcome your suggestions on any improvements.
Blandford Heights, Blandford Forum, Dorset. D11 7TG, UK
Tel: +44 (0) 1258 451338
Fax: +44 (0) 1258 455056
[email protected]
www.bristolmaid.com