Warmth and Wellbeing Scheme

Warmth and Wellbeing Scheme
www.seai.ie
1
Warmth and Wellbeing Scheme
The Warmth and Wellbeing Scheme aims to make homes warmer and
healthier to live in. It does this by providing extensive energy efficiency
upgrades to those in energy poverty who are living with Chronic
Obstructive Pulmonary Disease (COPD) and Asthma.
This initiative is being led by the Department of Communications,
Energy and Natural Resources (DCENR), in conjunction with the
Department of Health and the Health Services Executive (HSE).
This scheme is administered by the Sustainable Energy Authority of
Ireland (SEAI) on behalf of DCENR, in association with the HSE. This
scheme is a pilot scheme established initially for a three-year period
and will be subject to review.
3
Benefits to the homeowner
The scheme carries out home energy upgrades delivered through SEAI’s
Better Energy Warmer Homes contractors. Works include:
•
•
•
•
Standard attic insulation and appropriate ventilation;
Wall insulation: cavity, dry lining or external;
Boiler replacement as appropriate (oil or gas);
Draught proofing as appropriate.
The aim of the scheme is to improve the living conditions of people
with COPD and asthma. It also aims to reduce the requirement of these
citizens to attend hospital especially during the winter months when the
weather is coldest. The measures provided should improve the overall
living environment and ensure that homeowners experience additional
comfort levels in their home during the coldest winter periods.
Who is eligible for the scheme?
As a pilot scheme eligibility for the scheme is limited. To receive support
the following criteria must be met:
•
•
•
•
•
4
The applicant is over 55 years of age;
A member of the household must be in receipt of fuel allowance;
The applicant must be living with a chronic respiratory disease
i.e. Chronic Obstructive Pulmonary Disease or asthma and be
referred to the programme by a HSE official;
The applicant must reside within the area designated for the pilot
scheme, namely Dublin 12 and Dublin 24;
The home must be owner-occupied or rented from a local
authority/approved housing association.
How to apply
Applications are currently only possible where health care officials approve
an application and the criteria have been met. This is a referral based
scheme and no direct applications are possible. The service is free to all
participants; there is no fee to the homeowner for this service.
How the scheme works
Once an application is approved the home must be surveyed in order to
establish what energy efficiency measures are suitable for the home. SEAI
has an appointed team of surveyors who are expert in recommending
energy efficiency upgrades. This company will complete a full survey of
the home and recommend what works are appropriate and available
under the scheme. This service is similar to the Better Energy Warmer
Homes Scheme where no fees are involved.
Duration
The period of time taken to complete the works may vary from a
number of days to a number of weeks, depending on the services to be
delivered. We would expect average works to take no more than one
week to complete and particularly difficult and invasive works could
take a number of weeks.
All homes that receive services under this scheme will receive a post
works Building Energy Rating (BER) and in many cases a full inspection.
These services are aimed at examining the workmanship of the
contractors in order to ensure that the works are completed to the
required standard.
Guarantee
SEAI offers a two year guarantee on all works. Product manufacturers,
in some instances, offer longer warranty and where these are available
SEAI’s contractors will offer the extended warranties as part of the
standard service.
5
Better Energy Warmer Homes measures
and what they look like
Attic insulation
A substantial amount of energy is lost through the
roof, up to 35% in some cases. This is remedied by
having insulation fitted in the attic at the joist level.
This ensures that heat is kept in the house.
Ventilation
After insulating an attic or wall it’s important that appropriate
ventilation is installed to comply with current Building Regulations.
The requirement for ventilation measures is set out in the Building
Regulations.
When installed the ventilation in the attic will appear as buttons
in the roof. In some instances, soffit ventilation measures may be
installed rather than roof ventilation. Soffit ventilation performs the
same function.
Walls
25% - 30%
Roof
30% - 35%
Ventilation
25%
Soffit
ventilation
Floor
7% - 10%
Windows
15%
Areas of heat loss in homes
6
Cavity wall
Homes are typically built with a cavity wall type construction.
Insulation material is placed between the walls to ensure the inner
walls hold the heat longer.
For new buildings sheets of insulation material are placed between
the walls. For existing buildings where there is an existing cavity,
the insulation material can be pumped into the cavity space under
pressure.
Internal insulation
Outside wall
Cavity fill insulation
Outside wall
Insulation
1 metre
Vapour barrier
Plasterboard
Pumping
machine
Insulation
Inside wall
Up to the late 1980s most of the homes constructed in Dublin and
surrounding areas were built with a cavity block.
It is not possible to pump the cavity in these blocks. If a surveyor
determines that a home is built with this construction type he will
deem it unsuitable for cavity insulation. The remaining options to
insulate this type of building are to dry line the inside wall or externally
clad the insulation to the outside of the home.
7
Dry lining insulation
Dry lining is an insulation option where external insulation is not
possible. It involves insulating the internal walls of a building. An
illustration of the process is below.
External render
Blocks
Existing plaster
Insulation board
Vapour control layer
(VCL)
Plasterboard
Fixing to manufacturer’s
specification
8
External insulation
External insulation requires an external layer of insulation to be
wrapped around the existing structure. There are a range of finishes
and colours available but the general technology is similar in all
instances. A delivered system like this will require a number of weeks
of scaffolding outside a client’s home. There should be very little if any
disruption to the inner working of the home unless other measures
are being deployed to the home. It is important to note that there may
be circumstances where it is not possible to install these works for
technical reasons.
Before
After
9
Gas boiler replacement
In the Dublin region a significant
proportion of homes are heated by gas
fired boiler systems. These systems are
probably the most efficient methods
of heating your home. Over the last
decade new high efficiency boilers
have become available which improve
the efficiency of these systems to
90%. Gas boiler replacements may be
offered where a surveyor indicates that
a system is at end of life or is of an age
that will require replacement in the very
near future.
Oil boiler replacements
There are certain areas where a gas main is not available and then
homes typically would use oil based systems as their principal
source of home heating. This technology along with gas has seen
improvements in the type of boilers now being produced and the
efficiency rates have significantly increased. In line with gas systems
where a surveyor identifies a system at end of life or is of an age that
will require replacement in the very near future, a replacement system
may be offered.
10
Contact us
All queries in relation to the scheme
should be directed to the SEAI call
centre freephone 1800 250 204
Or contact your HSE representative
call 01 427 5032
Sustainable Energy Authority of Ireland
Wilton Park House, Wilton Place, Dublin 2, Ireland.
t +353 1 808 2100
f +353 1 808 2002
e [email protected]
w www.seai.ie
The Sustainable Energy Authority of Ireland
is partly financed by Ireland’s EU Structural Funds
Programme funded by the Irish Government
and the European Union.