to technical specification sheet

VANDA WAVE TAPE INFORMATION SHEET
Unit G, 166 Marua Road
PO Box 11-257
Ellerslie, AUCKLAND
Tel (09) 580 1350
Fax (09) 580 1351
www.vanda.co.nz
The Vanda Wave Tape is a simple but elegant heading comprising
of a unique hook and tape system.
The tape is stiff, transparent and 77mm wide which allows for a
consistent Ripple shape throughout the curtain giving it a very
uniform look.
The pockets on the tape are exactly 1cm wide, which makes it
easier to calculate and every tenth pocket/cm is marked which
enables quicker attachment of hooks without counting the pockets
and therefore quicker and easier to install.
By inserting the hook where marked the curtain would be approx
double the fullness, however the hooking position can be adjusted
according to your requirements (for a smaller fold, hooks are
spaced closer together, for a larger fold space the hooks further
apart).
The gliders are spaced 6cm apart, held by
nylon cord. The unique slimline shape of the
gliders allows for tighter stacking.
The gliders/runners rotate making it easy to
install and drape. The gliders can also be
individually replaced if damaged over time.
PLEASE NOTE:
The amount of hooks provided with the tape must be used in order for the tape to marry
up with the carriers when attaching to the track.
There is a marking every 10th pocket indicating where the hook should be placed. If
placed in this pocket then the curtain will be nearly double the fullness, however should
you not have enough fabric then you can adjust the hooking position and the tape can be
cut down however the amount of hooks supplied originally must be used.
HEADING – 2mm