HYPER EXTENSION BENCH
SKU# SKY 1099
ASSEMBLY MANUAL
Revised May 2014
The parts and hardware below have been included for assembly:
(A) Main Frame x 1
(B) Handle Bar x 1
(C) ‘U’ Base Frame x 1
(D) Handle Pads x 2
(E) Adjustable Bar x 1
(F) Footrest x 1
(G) Knob x 1
(H) End Plates x 2
(I) Large Bolts/Washers
and Lock Nut x 6
WARNING:
(J) Small Bolts/Washers x 4
• Manufacturer and seller expressly disclaim any and all liability for
personal injury, property damage or loss, whether direct, indirect,
or incidental, resulting from the incorrect attachment, improper use,
inadequate maintenance, or neglect of this product.
1 Locate the adjustable bar and the main frame.
Insert the bar into the frame and adjust to your
liking.
2 Locate the knob and tighten the bar on the frame
from the bottom.
3
Locate the 4 small bolts and washers along with
handle bars and pads.
Align the holes on the handle bar with those on
the pads and insert the small bolts.
Tighten using a wench. Do not over tighten.
4 Align the holes on the adjustable bar and the
handle bar. Locate one of the large bolts and insert
it from the top down. Tighten using the lock nut
and repeat on the other side.
5 Locate on of the end plates and align it with the “u”
base frame. Insert a large bolt and tighten on the
opposite end using the lock nuts. Repeat on other
side.
6 Locate the other end plate and align it with the
footrest. Insert a large bolt and tighten on the
opposite end using a lick not. Repeat on other
side.
Call Us!
We’re here 7 days a week to help you!
(909)-948-8400
Monday-Friday 5:00am-5:30pm pst
Saturday and Sunday 7:00am-3:30pm pst