FLY REELS
10
1
3
11
13
12
2
4
29 28
15
25
14
5 6 7 8 9
37 36 35 34
33 32 31 30
27
26
25
24 23 22
21 20
19
18
17 16
18
HOW TO CHANGE THE DRAG From LEFT To RIGHT HAND WIND
1. Remove the Spool from the reel Frame,
17
2. Remove the spring One Way Retainer (part #15) with a small screwdriver,
3. Take the One Way Bearing (part #14) out by tapping the spool on a table,
4. Flip the One Way Bearing over, and put it back into the original position,
5. Reinsert the spring Retainer back to secure One Way Bearing.
* For the RLS combo, the line is pre- spooled for left hand cranking. It is necessary to carefully unwind the line onto another spool
and replace after the direction of the reel has been changed.
NO.
PART NAME
NO.
PART NAME
NO.
PART NAME
NO.
PART NAME
NO.
PART NAME
NO.
PART NAME
8
PUSH HEAD COVER
15
ONE WAY RETAINER
22
DISK PLATE IV
29
DRAG CLICK PIN
36
DRAG KNOB LOCK SCREW
9
PUSH HEAD COVER SCREW
16
SPOOL CLICK SPRING
23
DISK PLATE V
30
MAIN SHAFT LOCK NUT
37
DRAG KNOB CAP
HANDLE KNOB SCREW
17
SPOOL CLICK PIN
24
DRAG PLATE
31
DRAG REAR WASHER I
SPOOL CLICK LOCK NUT
DRAG REAR WASHER Il
1
SPOOL
2
HOUSING
3
REEL FOOT
10
4
REEL FOOT SCREW
11
HANDLE KNOB COLLAR
18
25
GUIDE WASHER
32
5
PUSH HEAD PIN
12
HANDLE KNOB
19
MAIN SHAFT
26
BALL BEARING II
33
DRAG REAR WASHER III
6
PUSH HEAD
13
HANDLE KNOB RIVET
20
DISK PLATE I
27
DRAG PLATE PIN
34
DRAG KNOB
7
PUSH HEAD SPRING
14
ONE WAY BEARING
21
SLEEVE
28
DRAG CLICK SPRING
35
DRAG KNOB LOCK WASHER