NEW! LP® SmartSide® Cedar Texture Vertical Siding

NEW! LP® SmartSide®
Cedar Texture Vertical Siding
•Vertical siding creates a versatile charming or modern aesthetic
•16' length allows for one piece installation and eliminates horizontal joints*
•Use in combination with 16' SmartSide Cedar Texture or Reversible Trim
for a Board & Batten look
• For entire structure, or used as accent panel on tall walls,
vertical columns, gable ends and more
• No Groove Square Edge
5/50 Warranty
100% labor and
material replacement
• Treated engineered wood strand substrate
prorated limited
warranty on substrate
*Vertical Siding may only span one plate-to-plate. Each
Complete warranty details
vertical application is not to span beyond one floor to
available at lpcorp.com
ceiling distance, or one floor to top of gable distance.
Refer to the LP Vertical Siding Application Instructions at lpcorp.com for additional limitations.
38 Series Cedar Texture Vertical Siding (strand)
0.315 in.
(8 mm)
15.94 in. (40.5 cm)
Cedar texture
LENGTH
ACTUAL WIDTH
MINIMUM THICKNESS
16 ft. (192 in.)(4.9 m)
15.94 in. (40.5 cm)
0.315 in. (8 mm)
Visit LPSmartSide.com for full product catalog
Board & Batten
Pair LP® SmartSide® Vertical Siding with LP SmartSide
Trim for your next Board & Batten project
38 Series Cedar Texture Vertical Siding (strand)
LENGTH
ACTUAL WIDTH
MINIMUM THICKNESS
16 ft. (192 in.)(4.9 m)
15.94 in. (40.5 cm)
0.315 in. (8 mm)
*Vertical Siding may only span one plate-to-plate. Each vertical application is not to span
beyond one floor to ceiling distance, or one floor to top of gable distance.
Refer to the LP Vertical Siding Application Instructions at lpcorp.com for additional limitations.
440 and 540 Series Cedar Texture Trim (strand)
LENGTH
ACTUAL WIDTH
MINIMUM THICKNESS
16 ft. (192 in.)(4.9 m)
2.50 in. (6.4 cm)
0.625 in. (16 mm)
16 ft. (192 in.)(4.9 m)
3.50 in. (8.9 cm)
0.625 in. (16 mm)
16 ft. (192 in.)(4.9 m)
2.50 in. (6.4 cm)
0.910 in. (23 mm)
16 ft. (192 in.)(4.9 m)
3.50 in. (8.9 cm)
0.910 in. (23 mm)
5/50 Warranty
100% labor and
material replacement
prorated limited
warranty on substrate
Complete warranty details
available at lpcorp.com
440 and 540 Series Reversible Trim (fiber)
LENGTH
ACTUAL WIDTH
MINIMUM THICKNESS
16 ft. (192 in.)(4.9 m)
3.50 in. (8.9 cm)
0.625 in. (16 mm)
16 ft. (192 in.)(4.9 m)
3.50 in. (8.9 cm)
0.910 in. (23 mm)
Visit LPSmartSide.com for full product catalog
Cal. Prop 65 Warning: Use of this product may result in exposure to wood dust, known to the State of California to cause cancer.
© 2017 Louisiana-Pacific Corporation. All rights reserved. All trademarks are owned by Louisiana-Pacific Corporation
LPZB0761
4/17