presents
A.B. CHANCE
Hot Line Tools
Call Toll Free
1-877-GO ALTEC
9002-00027 09/05
Hot Line Tools
Clampsticks and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p
3
Wire Holding Stick. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p
5
Trouble Shooter Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p
5
Elbow Puller Tools and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . .p
6
Insulated Wrenches and Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p
7
Universal Tool Kits .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p
8
Telescopic Measuring and Disconnect Sticks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p
8
Disconnect and Universal Sticks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p 11
Universal Poles and Tool Hanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p 13
Hot Stick Care and Storage Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p 14
Rubber Insulating Blankets & Line Hoses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . .p 16
Covers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p 17
Grounding Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. .. . . . .p 18
Copper Mechanical Jumper Cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .p 18
C-Type Grounding Clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . .. . . .p 19
C-Type Clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . .p 20
Grounding Clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . .p 21
Ferrules & Jumper Cables. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p 22
Grounding & Mechanical Jumper Assemblies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . p 23
Call Toll Free
1-877-GO ALTEC
2
Clampsticks and Accessories
Single-Piece Style
Hinged Style
The most versatile tool in a lineworker’s hands, the
Chance Grip-All stick puts an easy-to-control “finger” on an
insulated pole. Although primarily designed for installing
hot-line and grounding clamps, it serves both overhead
and underground circuits with various end fittings.
Ideal for troubleshooters with limited tool-storage space in
their vehicle, this folding version operates with the same
features as the one-piece style.
Commonly called a “shotgun,” the operating mechanism
incorporates a sliding hand grip that opens the hook to
grasp a clamp eyescrew and retract it into the tool head.
A thumb latch then must be depressed to release the
locked hand grip so it can open the hook.
P/N
9000-30296
9000-30297
9000-30298
9000-30299
9000-30342
9000-30343
Folded
3’ 4”
4’ 4”
5’ 4”
6’ 4”
7’ 4”
8’ 4”
Extended
1 1/4” x 6’ 7”
1 1/4” x 8’ 6”
1 1/4” x 10’ 6”
1 1/4” x 12’ 6”
1 1/4” x 14’ 6”
1 1/4” x 16’ 6”
Weight
8 lb./3.6 kg.
9 lb./4.1 kg.
10 lb./4.5 kg.
10 1/2 lb./4.7 kg.
11 lb./5.0 kg.
11 1/2 lb./5.2 kg.
While the tool head is of Lexan® for close-quarter operations, the worker must maintain recommended working
distance solely on the Epoxiglas® pole section of the
handles as the hook and its actuator are metal parts.
Easy to care for, Grip-All sticks do not require field stripping to clean. All insulated parts including the operating
rod are outside the main pole, readily accessible to wipe
dry. CAUTION: Do not clean the plastic head with
solvent.
P/N
0704-20132
9000-40302
9000-30293
9000-30294
9000-30295
Description
1 1/4” x 4’ 5”
1 1/4” x 6’ 5 1/2”
1 1/4” x 8’ 5 1/2”
1 1/4” x 10’ 5 1/2”
1 1/4” x 12’ 5 1/2”
Weight
5 3/4 lb./2.6 kg.
6 1/2 lb./2.9 kg.
7 1/4 lb./3.3 kg.
8 lb./3.6 kg.
8 3/4 lb./3.9 kg.
P/N 9000-01868
To convert any Grip-All stick to
use all Universal Tool Accessories, the P/N 9000-01868 adapter
secures in the clampstick hook
and head housing.
Grip-All Clampstick Assist Ring
Grip-All Extensions
The Chance assist ring provides a suspension midpoint for
any Grip-All stick. Particularly
helpful on longer sticks, the assembly permits a support line
to attach at the smaller ring.
To help maintain safe-working
clearances for hotline procedures, an insulated Strain Link
Stick of proper size should be
used in the handline.
These extensions simply clamp on to the head of a Chance
Grip-All clampstick, adding 4 to 6 feet of reach, and operates by using the controls on the Grip-All handle.
P/N
9000-30377
9000-30378
Dimensions
1 1/4” x 4’
1 1/4” x 6’
Weight
3 1/2 lb./1.6 kg.
4 lb./1.8 kg.
P/N 9000-32543 3 1/2 lb./1.6 kg.
3
Clampsticks and Accessories Cont.
Telescoping Style
Positive Grip Clampstick
Chance Telescoping Grip-All sticks can replace several
conventional clampsticks. With fewer sticks, it still permits linemen to serve their many safe working distances
and positioning needs. This can reduce the number of
clampsticks required on a line truck, saving limited storage space.
The Chance Epoxiglas® Positive Grip Clampstick is made
for use on eyescrew grounding on tap clamps. It can
be mounted on the line and tightened at angles up to
30°. Fittings are aluminum and bronze. The butt end of
the tool is equipped with a combination tool hanger and
universal head.
Engineered interface between sections ensure that tool
retracts with full control. Close fit also helps keep out dirt
and moisture. Top section is of foam-center Epoxiglas®
insulated pole.
To install clamp, align locking ring with slot in housing;
place eye of clamp into housing. Holding locking ring and
clamp in one hand, rotate pole clockwise to trap eye. To
remove clamp, engage locking ring on clamp body and
rotate pole counter-clockwise to trap eye.
Basic clampstick functions of this telescoping stye are
identical to the fixed-length style. All controls can be
manipulated while wearing gloves. Easy to disassemble,
the Telescoping Grip-All stick must be kept clean and dry
inside and out for maximum personnel protection.
P/N
9000-31025
9000-31026
Extended
Lengths
5’ 6 3/4”, 6’ 9 1/2”, 8’
8’ 6 3/4”, 10’ 4 3/4”,
12’ 2 3/4”, 14’
Retracted
Length
5’ 2 3/4”
8’ 3 3/4”
P/N
9000-30302
9000-21303
9000-30422
9000-30425
Retracted
Length
5’ 2 3/4”
8’ 3 3/4”
Weight
6 lb./2.7 kg.
8 lb./3.6 kg.
Call Toll Free
1-877-GO ALTEC
4
Regular Head Only
Extra Long Head Only
Extra long head for use with
long eyescrew ground clamps.
Telescoping Style with Universal Fitting on Handle
Extended
Lengths
5’ 6 3/4”, 6’ 9 1/2”, 8’
8’ 6 3/4”, 10’ 4 3/4”,
12’ 2 3/4”, 14’
Head Type
Regular
Extra Long
Weight
6 lb./2.7 kg.
8 lb./3.6 kg.
Available in two sizes, each readily
locks at variable lengths. The design
features a rotating coupler and an
engineered positive-lock button with
safety stop to keep the sections from
parting or the hook releasing while in
use. The mechanism locks the sections into a solid and rattle-free tool.
P/N
9000-33060
9000-33061
Dimensions
1 1/4” x 8’ 6”
1 1/4” x 8’ 6”
Weight
4 lb./1.8 kg.
4 lb./1.8 kg.
1 lb./0.45 kg.
1 1/8 lb./0.5 kg.
Wire-Holding Stick
The Chance Epoxiglas® Wire-Holding Stick is used on
or around energized lines for forming, bending and positioning jumper wires; and for holding conductors during
splicing operations. The gripper, with an eye so that other
sticks can assist with heavy bending, will handle No. 6
solid copper through 1590 kcmil ACSR.
Operation of the wire-holding stick has been simplified so
that it grips much like a vise-grip. By tightening the knurled
nut at the control lever, the wire holding jaws can be positioned to grip the conductor firmly. When this is done,
the tightening control lever must be relaxed in a position
about one inch away from the pole. Then, to secure the
grip on the conductors simply move the control lever all
the way up along the rod.
The head of the tool locks in three stop positions so that
the lineman can engage and position conductors easily
from most angles. The knurled screw handle below the
jaw opening is used to adjust the head position from
straight to right or left.
P/N
9000-30368
9000-30369
Dimensions Weight
1 1/4” x 6’ 5” 6 1/2 lb./2.7 kg.
1 1/4” x 8’ 5” 6 3/4 lb./3.0 kg.
Trouble Shooter Kit
This Chance multi-duty kit includes six 4-foot sections of
field-proven 1 1/4” Epoxiglas® Universal Pole that snap
together. Spring-loaded locking buttons permit uses at
4, 8, 12, 16, 20 and 24-foot lengths. Butt section has a
Plastisol end cap. Fitting on top section with thumbscrew
accepts the Universal Accessories included in the kit.
The kit includes the following:
• Aluminum Disconnect Head for opening and closing switches,
opening enclosed cutouts, etc. has built in hanger hook.
• Non-Metallic Disconnect Head provides additional insulation for
indoor substations where buswork and switches are in close
proximity. Plastisol cap at top; 19” overall length with 15” long
Epoxiglas® section.
• Clamp Stick Head for use with 6” lone eyescrew ground clamps
has locking ring with detent ball for on-off operation. Made from
aluminum alloy.
• Tree Trimmer adds 1 1/2 feet to reach with 3-to-1 mechanical
advantage pulley and 25 feet of furnished rope. Offset universal
fitting on trimmer accepts pruning saw.
• Pruning Saw with deep-notched teeth for quick pullouts attaches
direct to top pole, tree trimer or pistol grip.
• Pistol Grip Saw Handle is for use when limbs can be reached and
insulation is not needed. Made from aluminum alloy.
• Storage Case of yellow heavy-duty vinyl-impregnated fabric has
separate pockets for individual tools and Velcro flap closures.
P/N
9000-31612
9000-32046
9000-32062
9000-44559
9000-31614
9000-44552
9000-21064
9000-44556
9000-44566
9000-32996
Description
Complete Kit
Top Section Epoxiglas® Pole
Mid Section Epoxiglas® Pole
Aluminum Disconnect Head
Non-Metallic Disconnect Head
Clamp Stick Head
Tree Trimmer
Pruning Saw
Pistol Grip Saw Handle
Storage Case
Weight
24 lb./10.8 kg.
2.25 lb./1.0 kg.
2.25 lb./1.0 kg.
1/8 lb./0.06 kg.
1.25 lb./0.6 kg.
1.25 lb./0.6 kg.
3.5 lb./1.6 kg.
.75 lb./0.3 kg.
.50 lb./0.2 kg.
3.25 lb./1.5 kg.
5
Elbow Puller Tools and Accessories
Impact Elbow-Puller
Arc Snuffer Removal & Replacement Tools
This lightweight Chance tool employs a simple, slidehammer mechanism to easily disengage and assist in
replacing elbows. The tool and grippers help the operator
control the elbow and stiff underground cable lead.
Without de-energizing URD bushings, these two Chance
hot-line tools permit easy retrieval of broken arc snuffers
and installation of replacements.
For a balanced grip the 5-pound slide hammer is Plastisol
coated and flared at both ends. Also for secure handling,
both front and rear handgrip areas of the pole are coated
with Griptread, a grit-filled rubber-base paint.
Available in three lengths, the tools are made of 1 1/4”
diameter orange Epoxiglas® pole. The 6 and 8 foot units
meet OSHA requirements with 25 and 48 inches of insulation respectively from the tool end to the handguard. On
the 4 1/2 foot unit (labeled “For Rubber Glove Use Only”)
insulation length measures 5 inches.
To pull an elbow connector insert hook through eye on
elbow. Close down grippers on elbow by rotating pole.
Support tool with one hand on front grip behind handguard
and other hand on slide hammer. Slam hammer from
front to rear anvil. Resulting impact should release elbow
with sufficient momentum to withdraw it from the bushing
without extended arcing.
To replace an elbow connector follow the same procedures for pulling except use slide hammer impact against
front anvil to help seat the elbow.
Designed to ensure adequate electrical clearances, both
tools are to be used expressly in a Grip All clampstick.
Intergal ring on each tool retracts into clampstick. Tool
bodies are high-impact plastic with steel inserts.
The removal tool works on the principle of a bolt extractor. Inserted into a damaged arc
snuffer, it permits retrieval by
unscrewing the broken part.
The replacement tool controls
alignment with a spring-action
center post that snaps into the
arc snuffer bore. Two steel lugs
of the tool engage holes in the
snuffer collar to transmit tightening torque.
P/N
9000-30236
9000-30237
Description
Removal Tool
Replacement Tool
Weight
1/4 lb./0.1 kg.
1/4 lb./0.1 kg.
Elbow Connector Tool Grippers
These Chance tools provide a sure grip for installing and
disconnecting elbow terminators. The tool grabs the elbow
and has a special integral hook
that fits through the rubber eye of
an elbow or the metal hook of a
bushing cap so that the lineman
has complete, positive control,
overcoming the resistance of the
stiff underground cable.
P/N
9000-31822
9000-31850
9000-31851
Description
6 - foot length
8 - foot length
4 1/2 - foot length
Weight
12 lb./5.4 kg.
12 1/4 lb./5.6 kg.
11 1/2 lb./5.2 kg.
P/N
9000-30704
9000-30613
9000-30614
9000-30814
9000-30815
Description
15 kV Plastic-Coated
25 kV Plastic-Coated
25 kV Uncoated
34.5 kV Plastic-Coated*
34.5 kV Plastic-Coated**
Weight
5/8 lb./0.3 kg.
1 lb./0.5 kg.
5/8 lb./0.3 kg.
1 lb./0.5 kg.
2 1/4 lb./1.0 kg.
* Fits RTE 200 AMP and 600 AMP Elastimold “T” Elbow
** For Elastimold Elbows
Call Toll Free
1-877-GO ALTEC
6
Insulated Wrenches and Accessories
Flexible Insulated Wrenches
Flexible Insulated Wrenches - Heavy Duty
These wrenches are used for tightening nuts on hardware
fittings on high-voltage lines. The coil spring around the
universal joint has just the proper degree of flexibility so
that the operator has control over the socket at various
angles. The spring is easily removed for lubricating.
Wrenches are made to fit any 1/2-inch square-shank
socket. Chance sockets are deep throated and accurately
broached. All wrenches are mounted on 1 1/2” diameter
Epoxiglas® poles.
Standard square socket in lower end accepts 1/2” squareshank ratchet or similar hand tools. Square shank on
upper end fits any 1/2”-drive socket.
Mounted on 1 1/2”-diameter Epoxiglas® extensions, these
wrenches may be used for tightening nuts on hardware
fittings on high-voltage lines.
Coil spring around the universal joint limits flexibility so
operator maintains control over the socket at various
angles. Spring removes easily for lubrication.
P/N 9000-66780
P/N 9000-32137
P/N 9000-32136
75 ft.-lb. torque rating
75 ft.-lb. torque rating
6’ 3” length
8’ 3” length
Epoxiglas® Torque Extension Stick
P/N 9000-18912
P/N 9000-18915
P/N 9000-18912
P/N 9000-18913
P/N 9000-18915
P/N 9000-18916
P/N 9000-18917
P/N 9000-18918
P/N 9000-66780
Insulated extension stick permits hot line work with hydraulic power tools on bucket trucks. Its 7/16”-hexagonal quick
connect fitting couples with a power tool’s drive socket.
On the other end, its square detent-ball fitting accepts
all 1/2”-drive wrenches. The 1 1/4” x 4’ Epoxiglas® pole
handguard is 6 inches from the ferrule with hex fitting.
P/N 9000-18917
w/flexible 1/2” sq. plug
and fixed 1/2” sq. plug
w/flexible 1/2” sq. plug
and fixed 1/2” sq. plug
w/flexible 1/2” sq. plug
and universal head hole through ferrule for
a 5/8” turning rod
w/flexible 1/2” sq. plug
and universal head hole through ferrule for
a 5/8” turning rod
w/flexible 1/2” sq. plug
and ratchet wrench with
1/2” sq. reversible plug
w/flexible 1/2” sq. plug
and ratchet wrench with
1/2” sq. reversible plug
Ratchet Wrench
6’ 3” length
8’ 3” length
6’ 3” length
P/N 9000-33009
Hex Socket Sets
8’ 3” length
Available in SAE and Metric size, each set includes sockets to fit and 1/2” (12.17 mm) square-shank drive tool.
6’ 3” length
8’ 3” length
P/N 9000-31085
includes 11 deep-well 6-point sockets
in sizes from 1/2” through 1 1/8”
P/N 9000-31086
includes 10 deep-well 6-point sockets
in sizes from 10 mm through 19 mm
7
Universal Tool Kits
With over 75 individual Chance Universal Tools to select for various maintenance jobs, these kits are a convenient
way of ordering. With one catalog number shipped in a single carton, these tools are most frequently used by hot stick
crews. Although all Universal Tools are still available as individual part numbers, ordering one or more of the following
kits will cover most tool requirements.
Tool Kit for Clevis Type Insulators
Tool Kit for Ball Socket Insulators
This 10-piece kit contains the
Universal Tools normally used to
handle cotter keys, bolts and insulator hardware for insulator control
on Clevis-tongue type suspension
or dead-end insulator strings.
This 7-piece kit contains those
Universal Tools required to handle
cotter keys, bolts and hardware
on ball and socket type suspension or dead-end insulator.
Kit includes:
• Pin Holder
• Cotter Key Remover
• Locating Pin
• Cotter Key Installing Tool
• Clear Vision Mirror
Kit includes:
• Shepherd Hook
• Insulator Fork
• Cotter Key Tool
• Universal Adapter
• All Angle Pliers
• Cotter Key Remover
• Cotter Key Pusher
• Ball Socket Adjuster
P/N 9000-31112
• Insulator Fork
• Ball Socket Cotter Key
P/N 9000-31113
Telescoping Measuring and Disconnect Sticks
Telescoping Measuring/Disconnect Sticks
Certified to OSHA dialectric requirements (Sub-part V,
section 1926.951), these full-function Chance telescoping tools do more than separate measuring sticks and
disconnect tools. To measure pole heights and conductor
clearances from the ground, three lengths and English or
Metric scales are available.
Disconnect head supplied for operating switches and
cutouts is removable. End fitting on insulated top section accepts other Universal Tool accessories for various
tasks near energized conductors. The measuring scales
are easy-to-read, with figures silk-screened on orange
fiberglass sections. English scales are marked with each
1-foot increment designated in a box, each inch in bold
numbers and half-inches designated by intermediate
bars. Metric scales similarly display meters, decimeters
and centimeters.
A positive spring-loaded locking-button mechanism and
safety plug feature in each section prevent separation of
the tool. Once snapped into place, the buttons securely
lock into position. There’s no worry about an unexpected
tool retraction.
English Scales (Feet, inches, half inches)
Storage/Extended
P/N
Sections
Lengths
9000-40310
7
61 in./30 ft.
9000-22013
8
63 in./35 ft.
9000-31735
8
48 in./25 ft.
Weight
8 3/4 lb./3.9 kg.
11 lb./5.0 kg.
9 lb./4.1 kg.
Metric Scales (Meters, decimeters, centimeters)
Storage/Extended
P/N
Sections
Lengths
Weight
9000-40312
7
1.56 m/9.09 m.
8 3/4 lb./3.9 kg.
9000-22014
8
1.62 m/10.6 m.
11 lb./5.0 kg.
Call Toll Free
1-877-GO ALTEC
8
Telescoping Measuring and Disconnect Sticks Cont.
Telescoping Disconnect Tools
These Chance Epoxiglas® Telescoping Tools have maximum convenience for the lineman because they permit
him to perform many routine jobs from ground level. The
universal end fitting on the insulated top section accepts a
wide variety of attachments so the lineman can disconnect
switches, replace cutout tubes and reclose, remove pole
covers, prune trees, replace bulbs and complete many
other overhead tasks.
The sticks retract to approximately 5’ so that they can be
carried on most trouble trucks, often in the cab section.
They have heavy duty, spring-loaded plastic buttons that
keep the extended tool sections securely locked in position. As each section is extended and twisted slightly, the
buttons pop into place, allowing working to be done with
complete control and confidence.
These sticks are offered in standard and heavy duty.
Both units use the same telescoping tube design. The
tip section of the heavy duty units is slightly larger in diameter (1 1/4” versus 1 1/16”) so that each telescoping
tube is slightly larger, resulting in a more rigid tool when
fully extended, important where additional weight may be
frequently encountered on maintenance tasks. Both tip
sections employ time-proved Epoxiglas®, the unicellular
foam-core material where the epoxy reinforced fiberglass
wall is built around the foam core to prevent any moisture
trapping voids that could build up between foam and
tool.
Standard Duty (1 1/16” dia. tip)
P/N
9000-31023
9000-31017
9000-31018
9000-31019
9000-31020
9000-31021
9000-31022
Retracted
Extended Lengths
Length
8 ft.
56”
8 - 12 ft.
57”
12 - 16 ft.
59”
12 1/2 - 16 1/2 - 20 ft.
61”
16 1/2 - 20 1/2 - 25 ft.
63”
17 1/2 - 21 1/2 - 25 1/2 - 30 ft.
65”
22 - 26 - 30 1/2 - 35 ft.
67”
Base Dia.
1 1/4”
1 1/2”
1 11/16”
1 7/8”
2 1/16”
2 1/4”
2 1/2”
Sections
2
3
4
5
6
7
8
Weight
2 lb./0.9 kg.
2 3/4 lb./1.2 kg.
4 lb./1.8 kg.
5 1/4 lb./2.4 kg.
7 lb./3.2 kg.
8 3/4 lb./3.9 kg.
11 lb./5 kg.
Retracted
Length
26”
48”
40”
Base Dia.
1 7/8”
2 1/2”
1 11/16”
Sections
5
8
5
Weight
2 3/4 lb./1.2 kg.
9 lb./4.1 kg.
2 3/4 lb./1.2 kg.
Retracted
Extended Lengths
Length
8 ft.
56”
8 - 12 ft.
57”
12 - 16 ft.
59”
12 1/2 - 16 1/2 - 20 ft.
61”
16 1/2 - 20 1/2 - 25 ft.
63”
17 1/2 - 21 1/2 - 25 1/2 - 30 ft.
65”
Base Dia.
1 1/2”
1 11/16”
1 7/8”
2 1/16”
2 1/4”
2 1/2”
Sections
2
3
4
5
6
7
Weight
3 lb./1.4 kg.
3 3/4 lb./1.7 kg.
5 lb./2.3 kg.
6 1/2 lb./2.9 kg.
8 1/2 lb./3.7 kg.
10 1/4 lb./4.6 kg.
Compact Standard Duty (1 1/16” dia. tip)
P/N
9000-32205
9000-31739
9000-33350
Extended Lengths
8 ft.
14 - 17 - 20 - 23 ft.
12 ft.
Heavy Duty (1 1/4” dia. tip)
P/N
9000-31597
9000-31598
9000-31599
9000-31600
9000-31601
9000-31602
Heavy Duty
Standard Duty
9
Telescoping Measuring and Disconnect Sticks Cont.
Heavy-Duty Adjustable Sticks
Clearly marked at each 1-ft. extension lock, one of these
Chance tools can replace as many as eight single-length
hotsticks. Especially for such tight confines as substations, these adjustable sticks can be stored in standardlength canisters and avoid the difficulties of working
extra-long sticks through busswork structures.
Switch-Style Head
These sticks are classified as heavy-duty due to their large
(1 1/4” diameter) insulated top section and 1 1/2” O.D.
epoxy-reinforced fiberglass base tube. In each size, a
2-foot section of the Epoxiglas® foam-core top section remains inside the base section at the longest locked, usable
length. Also at the shortest locked length, the insulated
top section extends a full 2 feet beyond the base.
High-strength-plastic buttons keep these tools locked at
each length. As the top section is extended and twisted,
the lock button pops into place. For one worker to quickly
adjust the length, a convenient alignment dot at 1-ft. setting on the insulated section matches another dot at the
top of the base section.
Disconnect-Style Head
Disconnect-Style NEMA Head:
P/N
Lockable Lengths
9000-32600
10, 11, 12, 13, 14 ft.
9000-32601 12, 13, 14, 15, 16, 17, 18 ft.
Collapsed
8’ 2 3/4”
10’ 2 3/4”
Weight
6 1/2 lb./2.9 kg.
8 lb./3.6 kg.
Collapsed
8’ 2”
10’ 2”
Weight
6 1/2 lb./2.9 kg.
8 lb./3.6 kg.
Collapsed
8’ 3 3/4”
10’ 3 3/4”
Weight
6 1/2 lb./2.9 kg.
8 lb./3.6 kg.
Switch-Style NEMA Head:
P/N
Lockable Lengths
9000-32602
10, 11, 12, 13, 14 ft.
9000-32603 12, 13, 14, 15, 16, 17, 18 ft.
Extension length is clearly
marked at each hole for
button engagement.
Universal Fitting Style:
P/N
Lockable Lengths
9000-32604
10, 11, 12, 13, 14 ft.
9000-32605 12, 13, 14, 15, 16, 17, 18 ft.
Universal disconnect head
(P/N 9000-44559) must
be ordered as a separate
item for universal-fitting
style sticks.
Call Toll Free
1-877-GO ALTEC
10
Disconnect and Universal Sticks
Disconnect Sticks
Chance disconnect sticks provide insulation safety for
linemen in opening and closing disconnect switches and
cutouts. They are also used for installing and removing
open-link fuse links.
Switch Stick Head Style
Poles are made of Epoxiglas® and NEMA-standard heads
of cast bronze in three types: switch head, disconnect
head, or spliced disconnect head.
For convenience in transporting and/or where greater
length is required, spliced disconnect sticks are available. The splice is strong and rigid, easy to put together
and easy to take apart. The taking-down feature of these
sticks makes them especially handy to carry on line trucks
or in tool trailers.
Also available is the fiberglass head disconnect stick,
which gives the additional insulation required for work
where bus and disconnect switch spacings are confined,
as in indoor substations.
1 1/4” Switch Stick Head
Splice for Spliced Disconnect Style
Switch Head
P/N
9000-03046
9000-30461
9000-30462
9000-30463
9000-30464
9000-30467
Description
Head Only
1 1/4” x 4’
1 1/4” x 6’
1 1/4” x 8’
1 1/4” x 10’
1 1/4” x 12’
Weight
4 oz./0.11 kg.
1 1/4 lb./0.6 kg.
1 1/2 lb./0.7 kg.
2 1/4 lb./1.0 kg.
2 3/4 lb./1.2 kg.
3 5/8 lb./1.6 kg.
Description
Head Only
1 1/2” x 6’ 1”
1 1/2” x 8’ 1”
1 1/2” x 10’ 1”
1 1/2” x 12’ 1”
1 1/2” x 16’ 1”
1 1/2” x 18’ 1”
1 1/2” x 20’ 1”
Weight
5 oz./0.14 kg.
2 1/4 lb./1.0 kg.
2 13/16 lb./1.3 kg.
3 7/16 lb./1.5 kg.
4 lb./1.8 kg.
5 5/16 lb./2.4 kg.
6 lb./2.7 kg.
6 9/16 lb./3 kg.
Disconnect Head
1 1/2” Disconnect Head
P/N
9000-26403
9000-22403
9000-32403
9000-42640
9000-30465
9000-30466
9000-30468
9000-06403
Spliced Disconnect Head
1 1/4” Spliced Disconnect Head
P/N
9000-21641
9000-61641
9000-81641
9000-02641
9000-42641
Description
1 1/4” x 6’ & 1 1/2” x 6’ 1”
1 1/4” x 8’ & 1 1/2” x 8’ 1”
1 1/4” x 8’ & 1 1/2” x 10’ 1”
1 1/4” x 10’ & 1 1/2” x 10’ 1”
1 1/4” x 12’ & 1 1/2” x 12’ 1”
Weight
6 lb./2.7 kg.
7 1/2 lb./3.4 kg.
8 1/4 lb./3.7 kg.
9 lb./4 kg.
10 1/2 lb./4.7 kg.
Fiberglass Head
Fiberglass Head
P/N
9000-56403
9000-66403
9000-76403
9000-86403
9000-96403
Description
1 1/4” x 4’
1 1/4” x 6’
1 1/4” x 8’
1 1/4” x 10’
1 1/4” x 12’
Weight
1 1/8 lb./0.5 kg.
1 5/8 lb./0.7 kg.
2 1/8 lb./1.0 kg.
2 5/8 lb./1.2 kg.
4 lb./1.8 kg.
11
Disconnect and Universal Sticks Cont.
Sectional Disconnect and Universal Tools
These Chance non-conductive splices snap together for just the right job length. Compact fittings interchange on
safety-orange Epoxiglas® insulated sections, and store in limited space. For quick assembly and long life, metal buttons
are rounded and springs are of stainless steel. Silicone coating and gloss finish seal out moisture. Base cap included
with top sections.
Extension Sections
(Both Sizes: 4’, 6’, 8’ and 10’
lengths, wtih female fitting at top
and male fitting at bottom)
Tree
Trimmer
Standard Switch
Head Disconnect
Non-Metallic
Disconnect
Plastic
Universal
1 1/4”-Diameter Poles
Standard Switch Head Disconnect
P/N
Description
9000-32073
6 inches
9000-32053
4 feet
9000-32054
6 feet
9000-32055
8 feet
Weight
3/4 lb./0.34 kg.
2 3/8 lb./1.07 kg.
2 5/8 lb./1.18 kg.
2 7/8 lb./1.29 kg.
Non-Metallic Disconnect Head
P/N
Description
9000-32095
6 inches
9000-32059
4 feet
9000-40320
6 feet
9000-32061
8 feet
Weight
1 lb./0.45 kg.
2 1/4 lb./1.01 kg.
2 1/2 lb./1.13 kg.
2 3/4 lb./1.22 kg.
Plastic Universal Head
P/N
Description
9000-32071
6 inches
9000-32046
4 feet
9000-32047
6 feet
9000-32048
8 feet
Weight
5/8 lb./0.28 kg.
2 lb./0.90 kg.
2 1/4 lb./1.01 kg.
2 1/2 lb./1.13 kg.
Tree Trimmer Head
P/N
Description
Weight
9000-32096
*2 feet
3 1/4 lb./1.46 kg.
9000-32097
*4 feet
3 1/2 lb./1.57 kg.
*Length excludes trimmer head fitting
Extension Section
P/N
9000-32062
9000-32063
9000-32064
9000-32133
Description
4 feet
6 feet
8 feet
10 feet
Weight
2 lb./0.90 kg.
2 1/4 lb./1.01 kg.
2 1/2 lb./1.13 kg.
2 3/4 lb./1.22 kg.
Base Cap
P/N
9000-32069
Description
5 inches
Weight
1/8 lb./0.06 kg.
Standard
Universal
1 1/2”-Diameter Poles
Standard Disconnect Head
P/N
Description
9000-32074
6 inches
9000-32056
6 feet
9000-32057
8 feet
9000-32058
10 feet
Weight
1 lb./0.45 kg.
3 1/8 lb./1.41 kg.
3 5/8 lb./1.63 kg.
4 1/8 lb./1.86 kg.
Standard Universal Head
P/N
Description
9000-32072
6 inches
9000-32049
4 feet
9000-32050
6 feet
9000-32051
8 feet
9000-32052
10 feet
Weight
1 lb./0.45 kg.
2 7/8 lb./1.29 kg.
3 3/8 lb./1.52 kg.
3 7/8 lb./1.74 kg.
4 1/8 lb./1.86 kg.
Extension Section
P/N
9000-32065
9000-32066
9000-32067
9000-32068
Description
4 feet
6 feet
8 feet
10 feet
Weight
2 lb./0.90 kg.
2 1/2 lb./1.13 kg.
3 lb./1.35 kg.
3 1/2 lb./1.57 kg.
Base Cap
P/N
9000-32070
Description
5 inches
Weight
1/4 lb./0.11 kg.
Call Toll Free
1-877-GO ALTEC
12
Standard
Disconnect
Base Cap
Universal Poles and Tool Hangers
Universal Poles
Designed for use as a hot stick handle for Universal Tools,
Chance Universal Poles are made of Epoxiglas® and
lightweight aluminum castings.
The Universal Tools on this page fit under the thumbscrew
of the spline on the Universal Pole for a rigid hot stick tool.
For job versatility, the splines allow angling the tool up to
90° in relation to the pole depending upon the individual
tool design.
The Storm Tool, a Universal Pole with special rubber
insulator skirts, is designed for emergency use. It provides extra leakage distance and disrupts water paths
when rain, sleet, or snow make regular tools hazardous.
Skirts break up streams that would otherwise run down
the pole.
P/N
9000-01760
9000-17601
9000-17620
9000-17630
9000-17640
9000-17660
9000-17600
9000-17602
9000-17604
9000-01761
9000-01770
9000-17908
9000-17910
9000-17912
9000-17914
Description
Pole w/one universal head
Pole w/one universal head
Rigid splice pole w/one universal head
Pole w/two universal heads
Pole w/two universal heads
Rigid splice pole w/two universal heads
Pole w/two universal heads
Pole w/two universal heads
Pole w/two universal heads
Spline storm tool w/two skirts
Hinged pole w/one universal head
Pole w/two universal heads, pole hanger
Pole w/two universal heads
Pole w/two universal heads
Pole w/two universal heads
9000-04455 Universal head only
9000-44550 Universal head only
Hinged Pole
Pole Dia. x Length
1 1/4” x 8’ 2”
1 1/4” x 6’ 1”
1 1/4” x 4’ 1”+4’
1 1/4” x 6’ 3”
1 1/4” x 8’ 3”
1 1/4” x 4’ 1”+4’ 1”
1 1/4” x 10’ 3”
1 1/4” x 12’ 3”
1 1/4” x 14’ 3”
1 1/4” x 8’ 2”
1 1/4” x 8’ 2”
1 1/4” x 8’ 3”
1 1/2” x 10’ 3”
1 1/2” x 10’ 3”
1 1/2” x 10’ 3”
Weight
3 lb./.4 kg.
1 3/4 lb./.8 kg.
5 lb./2.3 kg.
2 1/2 lb./1.1 kg.
3 3/4 lb./1.7 kg.
5 3/4 lb./2.6 kg.
4 lb./1.8 kg.
4 1/2 lb./2.0 kg.
5 lb./2.3 kg.
3 1/4 lb./1.5 kg.
4 1/2 lb./2.0 kg.
6 lb./2.7 kg.
6 lb./2.7 kg.
8 lb./3.6 kg.
10 lb./4.5 kg.
1 1/4”
1 1/2”
9 oz./.2 kg.
14 oz./.4 kg.
Spliced Pole
Universal Fittings
for Spliced Poles
P/N 9000-17640
P/N 9000-01761
9000-30251 Universal Fitting-Male
9000-30252 Universal Fitting-Female
9000-30253 Universal Fitting-Pair
Crossarm Tool Hanger
The Chance crossarm tool hanger is adjustable to crossarms ranging in width from 3 1/4 to 4 1/2 inches (depth of
the crossarm does not matter). The crossarm tool hanger
is made of strong, lightweight aluminum alloy and has
cadmium-plated steel hardware.
P/N 9000-01860 Crossarm Tool Hanger 2 lb./.9 kg.
13
Hot Stick Care and Storage Accessories
Moisture Eater II Cleaner-Solvent
Silicone Wipes for hot-line tools
Chance’s Moisture Eater II
was designed for cleaning contaminated Epoxiglas® found on
hot-line tools, line hose and
blankets. The new formula
consists of two solvents: One
for oils, waxes and silicone-type
contamination; one for moisture
contamination. This combination is ideally suited for cleaning
hotline tools.
Small pocket-size packets encourage frequent care of
insulated hot-line tools. This helps utilities stay in compliance with OSHA 29 CFR 1910.269(j). The hanger box
holds 50 wipes to keep them handy in crew bays, on
trailers and in trucks.
• Stronger solvent for water and conductive contaminants
• Safe to earth’s ozone layer: Free of chlorinated hydrocarbons
• Pleasant, orange scent from citrus-based component
P/N
9000-99613
Description
Moisture Eater Cleaner
1 gal.
Moisture Eater II Wipes
Small pocket-size packets encourage frequent
cleaning of insulated
hot-line tools, line hose
and rubber blankets.
This helps utilities stay
in compliance with OSHA
29 CFR 1910.269 (j).
The convenience of
sealed wipes means no
more rags to store or try
to keep clean in the field.
The disposable wipes
are easy to use. Just zip
open a foil packet, pull
out the silicone saturated
8”x10” lint-free towel and
wipe down a hotstick.
Chance Silicone Wipes
contain the same silicone that impregnates
hot stick wiping cloths
in the Epoxiglas® Cleaning Kit. Using the cloths
or Silicone Wipes on
fiberglass tools removes
dust and deposits a thin protective coat that helps resist
accumulation of dirt and other airborne contaminants.
The sealed wipes mean
no more rags to store or
try to keep clean in the
field; no more jugs to
stow, big spills, evaporation losses or wasteful excesses
just to wet large cloths. The hanger box holds 50 wipes to
keep them handy in crew bays, on trailers, or in trucks.
P/N 9000-02568 Silicone Wipes (Box of 50)
P/N 9000-02538 Moisture Eater Wipes (Box of 50)
Call Toll Free
1-877-GO ALTEC
14
Hot Stick Care and Storage Accessories Cont.
Epoxiglas® Cleaning Kit
Hot Stick Storage Tubes
The items contained in the Chance Epoxiglas® cleaning kit
are essential for the care and maintenance of Epoxiglas®
tools and insulated boom sections of aerial lift trucks.
The proper use of these maintenance aids will ensure
that maximum and useful life is obtained from Epoxiglas®
products. WARNING: Do not use on Gel-Coat or painted
Chance Hot Stick Storage Tubes are gray linear polyethylene with aluminum end caps and plated hardware. The
tubes are furnished with mounting hardware so they can
be installed on substation fences or line trucks.
boom surfaces.
Both end caps have two breather vents to permit condensation or other moisture to evaporate or drain out. Vents
will not permit insects to enter tube but will let moisture
out. The tube should be installed with the fixed end cap
about 1” above the open end so any condensation will
drain out the bottom vent in the cap.
Tools stored in these tubes are protected against weather,
dirt and ultraviolet attack. The polyethylene material is
the same that is used in Chance conductor covers, except
the color is gray. The gray color was selected to combat
ultraviolet damage to the tube itself and to blend with
substation fences. The polyethylene has a temperature
range of -100°F to 180°F.
P/N 9000-99871 Epoxiglas® Cleaning Kit
The kit consists of four parts:
Moisture Eater II - This cleaner should be used on
contaminated Epoxiglas® during general tool maintenance and in prepation for reglossing a tool’s surface.
Moisture Eater removes moisture and a wide variety of
contaminants such as dirt, tar, grease, tree sap, light metal
rubbings and old surface coatings without harming the
Epoxiglas® material.
The end cap, which can be opened by turning two wing
screws, will not fall to the ground when opened to insert
or remove a hot line tool, as the cap is secured to the
tube. The cap on the other end is permanently secured
to the tube.
Abrasive Cleaning Pads - These pads are used in conjunction with Moisture Eater to remove contamination that
clings to the tools surface. Gloss restorer must be applied after using these pads since cleaning with Moisture
Eater 2 will remove the glossy finish on the tool as well
as contamination. The pads may also be used on metal
parts to remove oxides and surface corrosion.
Gloss Restorer Kit - This kit consists of two parts. When
mixed and applied to the surface of a cleaned Epoxiglas®
tool they combine to form a clear, tough coating that replaces the original gloss and protects against contamination and moisture.
Hot Stick Wiping Clothes - Silicone impregnated cloths
are used to wipe down mildly contaminated Epoxiglas®,
removing dust and dirt, and depositing a thin protective
film on the surface of the tool. They give an added measure of protection when used after recoating with gloss
restorer.
P/N
Inside Length
9000-54403
5’ 4”
9000-74403
7’ 4”
9000-94403
9’ 4”
9000-30441
11’ 4”
9000-30443
13’ 4”
9000-30445
15’ 4”
9000-30447
17’ 4”
9000-30449
19’ 4”
9000-30442
21’ 4”
Overall Length
5’ 8”
7’ 8”
9’ 8”
11’ 8”
13’ 8”
15’ 8”
17’ 8”
19’ 8”
21’ 8”
Approx. Weight
10 1/2 lb./4.8 kg.
12 lb./5.4 kg.
20 lb./6.9 kg.
16 3/4 lb./7.6 kg.
18 lb./8.2 kg.
19 1/2 lb./8.8 kg.
21 lb./9.5 kg.
24.5 lb./11.0 kg.
25.75 lb./11.7 kg.
15
Rubber Insulating Blankets and Line Hose
Rubber Insulating Blankets
Accessories
Performance-designed material
Chance Class 4 flexible blankets help protect workers
from accidental contact with energized components during line maintenance. Made of ozone/corona-resistant
elastomer, these blankets offer excellent performance
properties in accordance with ASTM Standard Specification D-1048. The special formulation exhibits superior
resistance to long-term aging/checking and will retain its
high-visibility orange color.
Versatile protection, maximum rating
Flexible to cover many irregular shapes, rubber blankets
typically are used with conductor covers (flexible or rigid)
on deadends, apparatus, secondary racks, poletop pins
and crossarms. Because they are Class 4 (highest rating in the industry) and Type II (ozone-resistant), Chance
blankets may be used in applications which require lower
class or type. Chance blankets are designed with perimeter eyelets to accept Chance button 9700-40591 and most
other buttons existing in the field. The 1.5”-diameter center hole in Chance slotted blankets will fit easily around
common hardware.
P/N 9000-00346
P/N 9700-40588
36” x 36” Solid Blanket
36” x 36” Slotted Blanket
P/N 9700-40137
Clamp Pin, Rubber Glove
Special handle shape
also fits clampstick for
easy placement
P/N 9000-00531
Clamp Pin, Hot Stick
P/N 9700-40591
Rubber Blanket Button
Short-Lip Flexible Line Hose
Much lighter in weight than other flexible dielectric cover-ups, this orange v-line hose helps protect workers
from accidental contact with conductors. The ozone/
corona-resistant thermoplastic elastomer offers excellent performance properties. It does not absorb water.
The outer lip peels back with ease to open and starts
onto a conductor from either end. With a push at the
other end, the full-length slides on as the lips zip closed
around the conductor. To remove each piece, open one
end and strip the remainder off the conductor.
6 eyelets
P/N 9700-16341
Class 2, 1.25” Diameter, 6 Ft length, 5.44 lbs,
Coupler on one end
Proof Tested at 20kV AC rms
P/N 9000-60309
Class 3, 1.5” Diameter, 6 Ft Lengh, 7.2 lbs,
Coupler on one end
Proof Tested at 30kV AC rms
P/N 9000-40629
Class 2, 1.25” Diameter, 6 Ft Length, 4.55 lbs,
Straight on both ends
P/N 9000-40602
Class 3, 1.5” Diameter, 6 Ft Length, 6.22 lbs,
Straight on both ends
28 eyelets
Call Toll Free
1-877-GO ALTEC
16
Eyes and special handle
shape for easy placement
by clampstick
Covers
Pole Covers
These pole covers are used to help protect personnel
when raising or lowering a pole between energized lines
or to cover poles when rubber glove maintenance is performed in relatively confined areas. The covers are made
of high-dielectric linear polyethylene material that will
not flash flame. This material will have some softening
without deformation at approximately 170°F, and it will
resist brittleness at temperatures to -50°F. All Chance
pole covers are ribbed to reduce cover contact with the
pole, thus minimizing creosote contamination. The rope
handles permit personnel to easily spread the covers
and snap them around the pole; rubber gloves must be
worn during this procedure. Prolonged contact with an
energized conductor must not be allowed.
6” Diameter Pole Covers
P/N 9700-40577
48” overall length 6.5 lbs
P/N 9700-40579
72” overall length 9.5 lbs
9” Diameter Pole Covers
P/N 9700-40580
P/N 9700-40582
P/N 9000-49374
P/N 9700-40584
12” Diameter Pole Covers
P/N 9700-40586
24” long
P/N 9000-04030
48” long
P/N 9000-40600
72” long
12” long
24” long
48” long
72” long
2.5 lbs
4 lbs
9 lbs
13 lbs
5.5 lbs
11 lbs
16 lbs
Conductor Cover & Insulator Covers
These covers provide a highly versatile system of covering up a wide variety of configurations on distribution
systems. The units virtually surround the hot parts and
hardware to give the linemen extra protection when rubber gloving or using hot sticks. All are made of high
density polyethylene in a uniform wall thickness for excellent dielectric/puncture strength, perform well from
-50° to 170°F, and are bright orange in color.
Conductor covers are 5 feet long and are available with a
Grip-All adapter for hot stick application or without adapter for rubber glove application. Maximum conductor size:
666 kcmil ACSR. The conductor covers mate with insulator covers to cover pin-type or post-type insulator construction and also can be used with the deadend cover.
The conductor cover will couple with major brands of
rubber line hose and insulator covers of the 25kV class.
P/N 9000-40601
P/N 9700-22458
P/N 9700-39014
Conductor Cover 25 kV Phase-to-Phase
Conductor Cover 36 kV Phase-to-Phase
Conductor Cover 9720 kV Plastic Cover
Insulator covers come in two
heights. Either 12” or 16.5” tall
cover fits 6.5” to 9”-diameter
pin or post insulators. Special
slits in the insulator covers help
locate the conductor and hardware when installing the covers.
P/N 9700-22454
P/N 9700-40587
12” Insulator Cover
16.5” Insulator Cover
36 kv Phase-to-Phase
36 kv Phase-to-Phase
• Tested to ASTM F712
• Manufactured to ASTM F968 specifications
• Meet Class 4 requirements
17
Grounding Cable
These grounding cables offer supreme flexibility, even at extreme temperatures between -50 degrees C to 105 degrees C. With a
high resistance to flame, oil, frease, solvents, ozone, and abrasion, these cables are durable and heavy-duty. Lightweight, with a
yellow seoprene jacket, these cables also feature 600-Volt high dielectric strength integrity. MSHA approved.
Cable Size #2
Voltage Class: 600 volts
Stranding: 19/35/30
Approximate Cable O.D.: .475”
Continuous Current 150 Amps at 50-100 ft; 100 Amps at 100+ ft
Weight: 270 lbs/1,000 ft
Cable Size 2/0
Voltage Class: 600 volts
Stranding: 19/70/30
Approximate Cable O.D.: .635”
Continuous Current: 300 Amps
Weight: 542 lbs/1,000 ft
P/N 692-96066
P/N 692-96068
Cable Size 1/0
Voltage Class: 600 volts
Stranding: 19/55/30
Approximate Cable O.D: .575”
Continuous Current: 250 Amps at 50-100 ft; 250 Amps at 150+ ft
Weight: 418 lbs/1,000 ft
Cable Size 4/0
Voltage Class: 600 volts
Stranding: 19/111/30
Approximate Cable O.D.: .78”
Continuous Current 500 Amps
Weight: 843 lbs/1,000 ft
P/N 692-96067
P/N 9700-34943
Copper Mechanical Jumper Cable
Extremely flexible even at low temperatures, this cable features an insulation/jacket combination resistant to abrasion, oil, heat,
moisture and ozone. The natural orange color of this mold-cured ethylene-propylene-base coating imparts high visibility. For easy
identification, AWG size and voltage rating are embossed at 4-foot intervals. For extended service life, an extruded screen interfaces insulation and conductor. This strand screen improves voltage-stress control by adding dielectric strength and eliminating
internal corona. Insulation and conductor screen meet and exceed ICEA-NEMA standard S-68-516. For easy handling in adverse
conditions, conductors are extra flexible alloy-coated copper-stranded rope per ASTM B-189 or B-33. Ampacity ratings are based
on 90°C conductor temperature at 40°C ambient.
Cable Size #2
Voltage Class 15 kV
Stranding 259 / No. 26
Approximate Conductor Diameter .322” (8.2 mm)
Approximate Cable O.D. .779” (19.8 mm)
Continuous Current 200 Amps
Weight / Ea. .438 lb (0.199 kg)
P/N 9700-40571
Cable Size 1/0
Voltage Class 15 kV
Stranding 413 / No. 24
Approximate Conductor Diameter .404” (10.3 mm)
Approximate Cable O.D. .863” (21.9 mm)
Continuous Current 260 Amps
Weight / Ea. .598 lb (0.271 kg)
P/N 9700-40574
Cable Size 2/0
Voltage Class 15 kV
Stranding 273 / No. 23
Approximate Conductor Diameter .455” (11.6 mm)
Approximate Cable O.D. .914” (23.2 mm)
Continuous Current 300 Amps
Weight / Ea. .707 lb (0.321 kg)
P/N 9700-40576
Cable Size 4/0
Voltage Class 15 kV
Stranding 473 / No. 21
Approximate Conductor Diameter .602” (15.3 mm)
Approximate Cable O.D. 1.065” (27.1 mm)
Continuous Current 400 Amps
Weight / Ea. 1.047 lb (0.475 kg)
P/N 9007-11001
Call Toll Free
1-877-GO ALTEC
18
C-Type Grounding Clamps
Weight / Ea. 1.25 lbs.
Jaw Opening Size 0.162” to 0.814”
Fault Current Rating ASTM Grade 2
Material: Bronze
Terminal Type 5/8”-11 Thread
Handle Type Eyescrew
Jaw Type Smooth Jaws
Continuous Current 250 Amps
Fault Current 15 cycles 43,000 Amps
30 cycles 30,000 Amps
Recommended Torque: 200 in-lbs (271 N-M)
Jumper Range: #2 to 1/0 Cable w/ Threaded Terminal
P/N 9700-40149
Jaw Opening Size 0.162” to 0.814”
Fault Current Rating ASTM Grade 2
Material: Bronze
Terminal Type 5/8”-11 Thread
Handle Type Eyescrew
Jaw Type Smooth Jaws
Continuous Current 250 Amps
Fault Current 15 cycles 43,000 Amps
30 cycles 30,000 Amps
Recommended Torque: 200 in-lbs (271 N-M)
Jumper Range: #2 to 1/0 Cable w/ Threaded Terminal
Weight / Ea. 1.5 lbs.
Jaw Opening Size 0.128” to 0.998”
Fault Current Rating ASTM Grade 3
Material: Aluminum
Terminal Type 5/8”-11 Thread
Handle Type Eyescrew
Jaw Type Smooth Jaws
Continuous Current 300 Amps
Fault Current 15 cycles 43,000 Amps
30 cycles 30,000 Amps
Recommended Torque 250 in-lbs
Jumper Range: #2 Cable to 2/0 Cable w/ Threaded Terminal
Weight / Each: 1 lbs.
P/N 9000-61754
Jaw Opening Size 0.162” to 1.25”
Fault Current Rating ASTM Grade 5
Material: Bronze
Terminal Type 5/8”-11 Thread
Handle Type Eyescrew
Jaw Type Smooth Jaws
Continuous Current 400 Amps
Fault Current 15 cycles 43,000 Amps
30 cycles 30,000 Amps
Recommended Torque 250 in-lbs
Jumper Range: #2 Cable to 4/0 Cable w/ Threaded Terminal
Weight / Each: 1 lbs.
P/N 692-96057
P/N 9700-40190
Jaw Opening Size 0.162” to 0.814”
Fault Current Rating ASTM Grade 2
Material: Bronze
Terminal Type 5/8”-11 Thread
Handle Type Eyescrew
Jaw Type Smooth Jaws
Continuous Current 250 Amps
Fault Current 15 cycles 43,000 Amps
30 cycles 30,000 Amps
Recommended Torque: 200 in-lbs (271 N-M)
Jumper Range: #2 to 1/0 Cable w/Threaded Terminal
Weight/Each: 1 lb
Jaw Opening Size 0.128” to 1.25”
Fault Current Rating ASTM Grade 5
Material: Aluminum
Terminal Type Pressure
Handle Type Eyescrew
Jaw Type Smooth Jaws
Continuous Current 400 Amps
Fault Current 15 cycles 43,000 Amps
30 cycles 30,000 Amps
Recommended Torque 250 in-lbs
Jumper Range: #2 Cable to 4/0 Cable w/ Plain Terminal
Weight / Each: 2 lbs.
P/N 9700-37527
P/N 692-96106
19
C-Type Clamps
Jaw Opening Size 0.162” to 2”
Fault Current Rating ASTM Grade 5
Material: Aluminum
Handle Type: Eyescrew
Continuous Current 400 Amps
Fault Current 15 cycles 43,000 Amps
30 cycles 30,000 Amps
Recommended Torque: 250 in-lbs
Terminal Type Pressure
Jaw Type Smooth Jaws
Weight / Each: 2.75 lbs
Jumper Range - #2 to 4/0 Cable w/ Plain Terminal
Material: Aluminum
Fault Current Rating: ASTM Grade 5
Handle Type: Eyescrew
Continuous Current: 400 Amps
Fault Current 15 cycles 43,000 Amps
30 cycles 30,000 Amps
Recommended Torque: 250 in-lbs
Jaw Opening Size: 0.128” to 1.25”
Terminal Type: Pressure
Jaw Type: Serrated Jaws
Jumper Range: #2 to 4/0 Cable w/ Plain Terminal
Weight / Each: 1.5 lbs.
P/N 692-96145
P/N 9700-40195
Material: Aluminum
Fault Current Rating: ASTM Grade 5
Handle Type: Eyescrew
Continuous Current: 400 Amps
Fault Current 15 cycles 43,000 Amps
30 cycles 30,000 Amps
Recommended Torque: 250 in-lbs
Jaw Opening Size 0.162” to 1.5”
Terminal Type 5/8”-11 Thread
Jaw Type Smooth Jaws
Jumper Range - #2 to 4/0 Cable with Threaded Terminal
Weight / Each: 1.25 lbs.
P/N 9700-34630
P/N 9700-40193
Material: Aluminum
Fault Current Rating: ASTM Grade 5
Handle Type: Eyescrew
Continuous Current: 400 Amps
Fault Current 15 cycles 43,000 Amps
30 cycles 30,000 Amps
Recommended Torque: 250 in-lbs
Jaw Opening Size 0.128” to 1.25)
Terminal Type 5/8”-11 Thread
Jaw Type Serrated Jaws
Jumper Range - #2 to 4/0 Cable with Threaded Terminal
Weight / Each: 1 lbs.
P/N 9700-40194
Jaw Opening Size 0.162” to 2”
Fault Current Rating ASTM Grade 5
Material: Aluminum
Handle Type: Eyescrew
Continuous Current 400 Amps
Fault Current 15 cycles 43,000 Amps
30 cycles 30,000 Amps
Recommended Torque: 250 in-lbs
Terminal Type 5/8”-11 Thread
Jaw Type Smooth Jaws
Weight / Each: 2 lbs.
Jumper Range - #2 to 4/0 Cable with Threaded Terminal
Jaw Opening Size 0.162” to 2”
Fault Current Rating ASTM Grade 5
Material: Aluminum
Handle Type: Eyescrew
Continuous Current 400 Amps
Fault Current 15 cycles 43,000 Amps
30 cycles 30,000 Amps
Recommended Torque: 250 in-lbs
Terminal Type Pressure
Jaw Type Serrated Jaws
Weight / Ea. 2.5 lbs.
Jumper Range - #2 to 4/0 Cable w/ Plain Terminal
P/N 9700-18946
Call Toll Free
1-877-GO ALTEC
20
Grounding Clamps
Flat-Face Clamp
Jaw Opening Size 0.125” to 1.5”
Jaw Type Serrated Jaws
Recommended Torque 250 in-lbs
Fault Current Rating ASTM Grade 3
Material Aluminum
Terminal Type 5/8”-11 Thread
Handle Type Eyescrew
Continuous Current 300 Amps
Fault Current - 15 cycles 27,000 Amps
Fault Current - 30 cycles 20,000 Amps
Jumper Range:#2 to 2/0 Cable withThreaded Terminal
Weight / Ea. 1.5 lbs.
P/N 9700-40203
Flat-Face Clamp
Jaw Opening Size 0.125” to 1.5”
Fault Current Rating ASTM Grade 5
Material Bronze
Terminal Type 5/8”-11 Thread
Handle Type Eyescrew
Jaw Type Serrated Jaws
Continuous Current 400 Amps
Fault Current - 15 cycles 43,000 Amps
Fault Current - 30 cycles 30,000 Amps
Recommended Torque 250 in-lbs
Jumper Range:#2 to 4/0 Cable with Threaded Terminal
P/N 9700-40209
Flat-Face Clamp
Jaw Opening Size 0.125” to 1.5”
Jaw Type Serrated Jaws
Recommended Torque 250 in-lbs
Fault Current Rating ASTM Grade 3
Material Aluminum
Terminal Type Pressure
Handle Type Eyescrew
Continuous Current 300 Amps
Fault Current - 15 cycles 27,000 Amps
Fault Current - 30 cycles 20,000 Amps
Jumper Range:#2 to 2/0 Cable with Plain Terminal
Weight / Ea. 1.5 lbs.
P/N 9700-40211
Flat-Face Clamp
Jaw Opening Size 0.125” to 1.5”
Jaw Type Serrated Jaws
Recommended Torque 250 in-lbs
Fault Current Rating ASTM Grade 5
Material Bronze
Terminal Type 5/8”-11 Thread
Handle Type T-Handle
Continuous Current 400 Amps
Fault Current - 15 cycles 43,000 Amps
Fault Current - 30 cycles 30,000 Amps
Jumper Range:#2 to 4/0 Cable with Threaded Terminal
Weight / Ea. 4 lbs.
P/N 692-96109
Jaw Opening Size 0.125” to 1.5”
Fault Current Rating ASTM Grade 3
Material Aluminum
Terminal Type 5/8”-11 Thread
Handle Type T-Handle
Jaw Type Serrated Jaws
Continuous Current 300 Amps
Fault Current - 15 cycles 27,000 Amps
Fault Current - 30 cycles 20,000 Amps
Recommended Torque 250 in-lbs
Jumper Range:#2 to 2/0 Cable with Threaded Terminal
Weight / Ea. 1.5 lbs.
P/N 9000-61798
Jaw Opening Size 0.162” to 2”
Fault Current Rating ASTM Grade 5
Material: Aluminum
Terminal Type 5/8”-11 Thread
Handle Type Eyescrew
Jaw Type Serrated Jaws
Continuous Current 400 Amps
Fault Current 15 cycles 43,000 Amps
30 cycles 30,000 Amps
Recommended Torque 250 in-lbs
Jumper Range:#2 to 4/0 Cable with Threaded Terminal
Weight / Ea. 1.75 lbs.
P/N 9007-02256
21
Ferrules and Jumper Cables
Grounding Ferrules
Jumper Clamps
Shrouded ferrules overlap onto the grounding cable jacket
for stress relief to the terminal. Two crimps secure the ferrule
against the bare strands and one crimp applies on the jacket.
Unshrouded ferrules are available with shrink tubing that overlaps the bare cable conductor and jacket for stress relief.
Available either factory-installed in pairs on any cable length
specified or as separate individual units, the ferrules install simply with a hydraulic crimping tool. Complete illustrated installation instructions come with the ferrules and include a table for
the crimping die sizes to use.
The G4758 series jumper clamp has
a handle length of 5.625” below the
handguard. The bearing type floating
washer lower contact improves gripping action and prevents conductor
scoring. All metal parts are made of
copper alloy to improve resistance to
oxidation. The 300 amp continuous
current rating is based on using 2/0
jumper cable on the tap side.
Voltage Class 15 kV
Main Line Range: 162” to .721”
Jumper Cable Range: #2 to 2/0 Cable
Weight / Ea. 2.25 lb
P/N 9700-40135
The G4765 series jumper clamp has
the same polyethylene material in
the handle as other Chance jumper
clamps. The handle length below the
handguard is 7.5”. The 400 amp continuous current rating is based on using 4/0 jumper cable on the tap side.
Shrouded Plain Copper Ferrules
for pressure-type grounding-clamp terminals
P/N
P/N
P/N
P/N
692-96140
9700-40141
9700-40142
9700-40144
Cable Size #2
Cable Size 1/0
Cable Size 2/0
Cable Size 4/0
Voltage Class 25 kV
Main Line Range: .162” to .883”
Jumper Cable Range: #2 to 4/0 Cable
Weight / Ea. 2.75 lb
P/N 9700-05084
Unshrouded Plain Copper Ferrules
for pressure-type grounding-clamp terminals
P/N
P/N
P/N
P/N
9700-40145
692-96133
692-96117
9700-40146
Cable Size #2
Cable Size 1/0
Cable Size 2/0
Cable Size 4/0
Shrouded, Threaded-Stud Copper Ferrules
for tapped or drilled grounding-clamp terminals
P/N
P/N
P/N
P/N
9000-02622
692-96125
9700-34631
8110-01191
Cable Size #2
Cable Size 1/0
Cable Size 2/0
Cable Size 4/0
Unshrouded, Threaded-Stud Copper Ferrules
for tapped or drilled grounding-clamp terminals
P/N
P/N
P/N
P/N
692-96058
9700-40147
9700-40148
9007-02609
Cable Size #2
Cable Size 1/0
Cable Size 2/0
Cable Size 4/0
Voltage Class 35 kV
Main Line Range, .162” to 1.165”
Jumper Cable Range, #2 to 4/0 Cable
Weight / Ea. 3 lb
P/N 9700-40136
Call Toll Free
1-877-GO ALTEC
22
The G4775 series Jumper Clamp has
a larger contact opening for use on
larger contact opening for use on larger conductor distribution lines. The
handle length below the handguard
is 8.375”. Easy to assemble, the connector assemblies are interchangeable between the two sizes of 15 kV
Jumper Clamps. The 400 amp continuous current rating is based on using
4/0 Jumper Cable on the tap side.
Grounding & Mechanical Jumper Assemblies
Grounding assemblies can be fabricated with #2, 1/0, 2/0, or 4/0 600 Volt yellow
or orange 25kV cable, hotstick or barehand clamps, and threaded or unthreaded
ferrules. Grounding assemblies are tested for resistance, tagged with resistance
value and date-tested. Heat shrink is applied to protect from water penetration. Contact your nearest Altec representative at 1-877-GO ALTEC to create a
grounding assembly to best meet your needs.
23
Contact Altec for all of your parts and accessory requirements.
1-877-GO ALTEC