IED UNIT 2 Review
Name:
Draw and briefly define the following line types:
Object
Construction
Hidden
Center
Section
Short-Break
Dimension
Extension
Long-Break
Leader
1. ___________________________ lines take precedence over hidden and center lines
2. ___________________________ lines take precedence over center lines
3. ___________________________ lines take precedence over all others
4. ___________________________ drawing shows three faces of an object in one view and provides
a realistic view of an object.
5. An __________________________ pictorial starts with a straight-on view of one of the object’s
faces, which is often the front face
6. Label the two figures as either cavalier or cabinet. 
7. Two types of oblique pictorials:
– ________________ - full depth
– ________________ - half depth
7. The difference in oblique drawings in based on the ________________.
8. _______________________________ means equal measure.
9. Label the height, width and depth. 
10. The lines on 
Use ________________ shading to enhance the appearance
of the pictorial sketch and create a more realistic
representation.
11. This sketch is an example of ___________
_______________ ___________________.
12. This sketch is an example of ___________
_______________ ___________________.
13. A _________________________ drawing offers the most realistic three-dimensional view of all
the pictorial methods, because it portrays the object in a manner that is most similar to how the
human eye perceives the visual world.
14. A ___________________________ line represents the horizon.
15. Another name for a multiview sketch is _________________ __________________.
16. The most common type of sketch that's used for manufacturing (because it shows the views
without any distortion is called _____________________ ____________________.
17. All three-dimensional objects have __________________, _______________, and ___________.
18. ____________________ is associated with an object’s side-to-side dimension.
19. ____________________ is associated with an object’s top-to-bottom dimension.
20. ____________________ is associated with front-to-back distance.
21. The most common views in a multiview drawing are
______________, ____________, and ___________
______________.
22. Label them 