QUICK GUIDE
Preparation & Use
Note: Read the entire instruction for use. Empty your bladder before irrigation.
Follow the instructions given by your healthcare professional.
A training session with a healthcare professional specialized in TAI and familiar
with the Navina Systems is mandatory before using the Navina Classic system.
2
3
1
2
1
3
1. Assembly
2. Activation
2. Connect the water container tube between water
container and control unit (dark blue).
2. Pump water with the blue pump until it covers 3/4 of the catheter tube.
1. Fill water to the 0-mark of the container. Close the lid.
1. Make sure water flow is opened.
3. Close water flow.
3. Connect the catheter tube between control
unit and catheter (light blue/white).
2
5
4
1
1
3
2
3. Instillation
1. Insert rectal catheter to the catheter handle.
4. Evacuation
2. Inflate balloon with light blue pump.
3. Gently pull catheter slightly down to seal the rectum.
4. Open water flow
1. Deflate balloon by pressing
black button.
.
5. Instill water with dark blue pump.
2. Remove catheter.
6. Close water flow
3. Allow bowel to empty.
.
5. Disassembly
1. Open water container lid.
2
6
3. Empty water from tubes.
and empty water from control unit.
5. Disconnect catheter and dispose as household waste.
5
4
2. Disconnect tubes from control unit.
4. Open water flow
3
1
6. Disconnect tube from water container and empty water.
7. Rinse, clean and dry the reusable parts in mild soapy water.
Wellspect HealthCare, Aminogatan 1, P.O. Box 14, SE-431 21 Mölndal, Sweden.
Phone: +46 31 376 40 00. www.navinasystems.com
7
3
© 2016 Wellspect HealthCare, a Dentsply Sirona Company. All rights reserved. 72846-USX-1604.
Navina™ is a trademark of Wellspect HealthCare.
6