Humidity curing and storage of
mortar specimens
EN 196-1
Controlled-humidity and water bath storage of mortar prisms 40.1 x 40 x 160 mm
ASTM C109
Controlled-humidity and water bath storage of mortar cubes 50 x 50 x 50 mm
TesTing Bluhm & Feuerherdt gmbH · Motzener strasse 26 b · De-12277 Berlin · germany · Phone +4930-7109645-0 · Fax -98 · [email protected] · www.testing.de
Trusting is good, but
is better
Humidity storage cabinet for mortar prisms and
cubes in three-gang moulds
EN 196-1, ASTM C109
Curing temperature: + 20°C +/- 1°C
Humidity: > 95% ± 3%
Electronic adjustable control for temperature
and humidity
Made of stainless steel
230 V / 50 Hz / 1200 W
1.0321.01
1.0322
1.0321
1.0321.01
1.0321.02
TeleThree gang moulds
scoping
racks
6
8
12
40.1 x 40 x 160 mm
EN 196-1
50 x 50 x 50 mm
ASTM C109
40.1 x 40 x 160 mm
EN 196-1
50 x 50 x 50 mm
ASTM C109
40.1 x 40 x 160 mm
EN 196-1
50 x 50 x 50 mm
ASTM C109
Capacity
4 x 6 = 24 moulds
Weight:
1400 x 800 x 1730 mm
350 kg
1400 x 800 x 1730 mm
360 kg
1400 x 800 x 1900 mm
390 kg
10 x 6 = 60 moulds
4 x 8 = 32 moulds
10 x 8 = 80 moulds
4 x 12 = 48 moulds
10 x 12 = 120 moulds
1.0321.05
Art.-No.
Dim. (wxdxh)
TeleThree gang moulds Cabinets
scoping
racks
Humidity storage cabinet for mortar prisms and
cubes in three-gang moulds, workbench version
EN 196-1, ASTM C109
Curing temperature: + 20°C +/- 1°C
Humidity: > 95% ± 3%
Electronic adjustable control for temperature and
humidity
Made of stainless steel
230 V / 50 Hz / 1200 W
Capacity
Dim. (wxdxh)
Weight:
1.0321.03
3
40.1 x 40 x 160 mm
50 x 50 x 50 mm
1
4 x 3 = 12 moulds
10 x 3 = 30 moulds
1600 x 800 x 900 mm
240 kg
1.0321.04
6
40.1 x 40 x 160 mm
50 x 50 x 50 mm
2
4 x 6 = 24 moulds
10 x 6 = 60 moulds
2220 x 800 x 900 mm
300 kg
1.0321.05
9
40.1 x 40 x 160 mm
EN 196-1
50 x 50 x 50 mm
ASTM C109
3
4 x 9 = 36 moulds
2650 x 800 x 900 mm
400 kg
10 x 9 = 90 moulds
TesTing Bluhm & Feuerherdt gmbH · Motzener strasse 26 b · De-12277 Berlin · germany · Phone +4930-7109645-0 · Fax -98 · [email protected] · www.testing.de
Subject to technical modifi cation without notice. 06/2015
Art.-No.
1.202.06 B
Trusting is good, but
1.0227.01
is better
1.0227
Wet-storage box, plastic
With supporting grat for cement prisms or cubes
Dim. (wxdxh) = 400 x 300 x 170 mm
1.0227.01
Wet-storage box, plastic
With supporting grat for cement prisms or cubes
Dim. (wxdxh) = 600 x 400 x 150 mm
1.0330
Humidity cabinet
EN 196, ASTM C109
Material: stainless steel, front door glass
For storage of 10 three-gang moulds for prisms 40.1 x 40 x 160 mm
or 20 three-gang moulds for cubes 50 x 50 x 50 mm
Curing temperature: + 20°C +/- 1°C
Humidity: > 95% ± 3%
Electronic adjustable control for temperature and
humidity
Dim. (wxdxh) = 700 x 730 x 1920 mm
Weight: 135 kg
230 V / 50 Hz / 500 W
1.0325
Waterbath for mortar prisms
EN 196-1, ASTM 109, ASTM C511
Double-walled stainless steel made with wool insulation
Equipped with digital thermostat and electric stirrer
The bath ensures a constant and uniform temperature.
Temperature range: from ambient to + 60°C, with accleracy
of ± 0.4°C at 20°C. The bath is equipped with digital thermostat
and dual sufaty thermostat with higher Thermic thresh ansuring safe
working conditions.
A cooling coil is to bee, when room temeratur device connected to
the water net exceeds the requested one.
Capacity of bath: 40 litres for about 60 prisms 40.1 x 40 x 160 mm
Inside dim. (wxdxh) = 510 x 350 x 230 mm
Outside dim. (wxdxh) = 680 x 420 x 420 mm
Weight: 28 kg
230 V / 50 Hz / 1200 W
1.0329
Water bath for mortar prisms with heating
and cooling device
EN 196-1, ASTM C109, ASTM C511
Double-walled stainless steel made with wool insulation
Equipped with digital thermostat and electric stirrer
With electrical heating and cooling device
The bath ensures a constant and uniform temperature at + 20°C
Tolerance +/-1°C
Capacity of bath: 45 litres for about 60 prisms 40.1 x 40 x 160 mm
Inside dim. (wxdxh) = 635 x 360 x 205 mm
Outside dim. (wxdxh) = 800 x 430 x 1000 mm
Weight: 60 kg
230 V / 50 Hz / 1700 W
1.0325
1.0329
TesTing Bluhm & Feuerherdt gmbH · Motzener strasse 26 b · De-12277 Berlin · germany · Phone +4930-7109645-0 · Fax -98 · [email protected] · www.testing.de
Subject to technical modifi cation without notice. 06/2015
1.0330
Trusting is good, but
1.0326
is better
Water bath for standing mortar prisms
EN 196-1
Consisting of:
Stainless steel frame with 2 plastic tanks
Wet storage capacity for 192 specimens
Plastic grating to fix the specimens
Thermostat heating system (without cooling device)
Dim. (wxdxh) = 1000 x 750 x 1500 mm
230 V / 50 Hz
l
l
l
l
1.0326K
Water bath for standing mortar specimens
Consisting of:
Stainless steel frame with 2 plastic tanks
Wet storage capacity for 192 specimens
Plastic grating to fix the specimens
Thermostat heating system (with cooling device)
Dim. (wxdxh) = 1000 x 750 x 1500 mm
400 V / 50 Hz with 16 A CEE-plug
l
l
1.0326
Other dimensions for
other prisms / storage Numbers
possible
l
l
Water bath for standing mortar specimens
Consisting of:
Stainless steel frame with 2 stainless steel tanks
Wet storage capacity for 192 specimens
Stainless steel grating to fix the specimens
Thermostat heating system (without cooling device)
Dim. (wxdxh) = 1000 x 750 x 1500 mm
230 V / 50 Hz with 16 A CEE-plug
1.0326S
l
l
l
l
1.0326SK
Water bath for standing mortar specimens
Consisting of:
Stainless steel frame with 2 stainless steel tanks
Wet storage capacity for 192 specimens
Stainless steel grating to fix the specimens
Thermostat heating system (with cooling device)
Dim. (wxdxh) = 1000 x 750 x 1500 mm
400 V / 50 Hz with 16 A CEE-plug
l
l
l
1.0326SK
Other dimensions for
other prisms / storage numbers
possible
Testing Bluhm & Feuerherdt GmbH · Motzener Strasse 26 b · DE-12277 Berlin · Germany · Phone +4930-7109645-0 · Fax -98 · [email protected] · www.testing.de
Subject to technical modifi cation without notice. 06/2015
l