HOW DO YOU STORE YOUR TOOLS AND ITEMS?
If you now
store tools and
maintenance
items like this
Stanley Vidmar
has a better way
using typically
5 0 % less space.
LOST TIME.
Poor organization,
poor control.
K
C
M
Service Parts
INTEGRAL LOCKING SYSTEM.
Maximum security is provided against
theft and unauthorized access.
ELIMINATE STORAGE OF
AIR. Stack inventory tightly.
HEAVY-DUTY SUSPENSION
SYSTEM. All drawers can hold up
to 400 pounds when fully extended.
Lasts for years of heavy-duty use.
GAIN EASY ACCESS. Full extension drawers
allow all items to be easily seen and retrieved.
CONTAIN STORED ITEMS. Add sides, back and
front to prevent spilling.
PROVIDE ORGANIZATION. Identify and subdivide
the drawer with labels, partitions, bins, and dividers.
PROTECT CONTENTS. Provide a housing to
safeguard contents from dirt and dust.
MODULAR DESIGN. Cabinets can
be placed side to side, back to back,
or stacked — completely adaptable
to every situation and application.
Save space, time
and increase
productivity.
49'
Maintenance
Parts
11 Grammes Road, P.O. Box 1151, Allentown, PA 18105-1151 Tel 800-523-9462 Fax 800-523-9934
www.stanleyvidmar.com Email: [email protected] www.stanleyworks.com
25'
29'
Go from this, 1421 sq. ft.
PARTS?
Electrical Parts
ALL ITEMS EASILY ACCESSIBLE.
The drawer is 25" square, which is
the average extended arm length.
Items can be reached from the front
or the side. Drawers are available in
15 different heights ranging in size
from 2-1/4" to 13-1/4".
BUILT-IN INEFFICIENCY.
Stretching, climbing, stooping, and searching.
Y
Fax 800-523-9934
YOUR
EVERYTHING WITHIN SIGHT.
Cabinet height is 59" maximum,
5" below average eye level.
WASTED SPACE.
Storing of air.
ACHIEVE HIGH DENSITY.
Pack space fully.
1-800-523-9462
HOW DO YOU STORE
The Solution
The Problem
The Need
STORAGE SYSTEMS
Stanley Vidmar professionals custom design products
and services. All it takes is one call. No matter where you
are, one of our sales engineers is nearby to assist you,
free and without obligation.
29'
to this, 725 sq. ft.
FORM# 20020
AD NO. STMT8005
PREPARED BY STAN WINKLER
MARKETING SUPPORT INC.
200 E. RANDOLPH., CHICAGO, IL 60601
FOR
STANLEY VIDMAR
5/C BLEED PG.
JOB No: STMT80015
File name:Vidmar How Do You Store
Original creator and date: Stan Winkler
Layout revisions and dates:SW060900LO/TY
PRINTOUT @ 50%
FEATURES
CONFIGURATIONS
Stanley Vidmar
Modular Cabinets
provide an
array of
benefits
for parts,
maintenance,
MAXIMIZING SPACE.
Greater utilization of the cube
permits even greater storage
densities when using Stanley
Vidmar Modular Cabinets. This
typically reduces the space
required for storing the same
items by 50% or more.
FLEXIBILITY.
Drawer interiors can be
custom designed and easily
rearranged to meet changing
storage needs.
FIND ITEMS FASTER.
The high concentration of
items stored systematically in
a small area reduces stocking
and retrieval times.
and electronic
storage
Y
M
C
K
operations.
COMPLETE STORAGE
PROTECTION. Stanley
Vidmar cabinets with close-fitting drawers protect contents
from accidental damage, dirt
and dust. Strong metal drawer
dividers prevent contact and
impact damage to delicate
parts.
INVENTORY AT A GLANCE.
The ability to see a drawer’s
entire contents in one glance,
along with clear labeling and
good organization, eliminates
the possibility of running out
of stock without realizing it.
This also permits rapid
inventory checks.
IMPROVED SECURITY.
Items inventoried out of view
reduce the number of curious
and unauthorized personnel
entering the storage area.
CABINETS IN THE MEZZANINE MODE.
By stacking cabinets into
mezzanines, you free
up valuable floor
space. This design is
perfect for less
frequently requested
parts.
CABINETS IN THE
WORKSTATION MODE.
Workstations are
ideal for repairing
electrical or mechanical
items, or as a work desk.
TOOL TAXI.
Tools are easily transported in an
organized manner to the work site.
CABINETS IN THE WALK AROUND MODE.
Higher storage densities are achieved with Stanley Vidmar
modular cabinets, saving floor space for other storage and
operating needs. This space savings of typically 50% or
more permits rapid access to daily or highly requested parts.
ISSUE AREA.
Counter height cabinets are ideal for storing the most
frequently requested parts for quick fulfillment of orders.
There are six different housing heights that can
be ordered in six standard styles: standard,
shallow depth, small version, extra wide, extra
wide shallow depth and double wide. Eleven
standard colors are also available. Cabinets can be
filled with drawers, roll-out shelves, or stationary
shelves. Accessories like locking systems, doors
and drawer accessories can be ordered to further
customize a cabinet to fit your needs.
Drawers are available in 15 different usable
heights, ranging in size from 2-1/4" to 13-1/4".
Operating capacity is 400 pounds per drawer.
59"
44"
OPEN SHELVING
(36" X 12")
STANLEY-VIDMAR
MODULAR CABINET
A move from open shelving
182 sections
40 cabinets
IMPROVED WORKING
ENVIRONMENT.
The aesthetics of Modular
Storage Cabinets modernizes
your storage area and
improves morale.
Area occupied
30' x 75' (2250 sq.ft.)
21' x 30' (630 sq.ft.)
to modular cabinets releases
Retrieval time
3.2 min.
1.1 min.
Time required to take inventory
4 days
12 hours
Personnel in attendance
2
1
Workspace appearance
Cluttered, cramped,
inconvenient
Clean, open,
organized
1, 6 2 0 s q u a r e f e e t f o r o t h e r
uses, improves operations,
and speeds parts retrieval.
Drawer interiors can be customized in a vast number of
configurations. The Stanley Vidmar sales engineer will
help you select the proper cabinet, drawers and drawer
interior combinations to fit your specific needs whether
it’s a customized cabinet or a preconfigured product.
LABEL HOLDERS.
To identify compartment
contents.
Drawer Accessories
30"
27"
DRAWER PULLS.
To identify drawer contents.
PARTITIONS.
Span each drawer
either front-to-back
or side-to-side.
QUARTER TRAYS. Plastic quarter trays
that are available in three sizes fit into one
quarter of a Stanley Vidmar drawer and are
designed for storage of very small items.
LABEL HOLDERS. For instant identification of drawer
compartment contents, label holders snap directly to the
divider. Paper labels and vinyl protective shields included.
Comes in four different sizes.
BOTTOM POSTS AND INSERTS. Available in three sizes, the
posts and inserts have been designed to store items with center
holes thus providing maximum storage density and safety.
ADHESIVE BACKED LABEL HOLDERS. One by three-inch label
holder provides instant identification of drawer compartment
contents. Adheres directly to the divider, partition or plastic bin.
Four different models of bin dividers are available. Five bin label
holders are available.
DRAWER BOTTOM INSERTS. Designed to protect delicate
tools and instruments. Pegboard and fiberboard required for
use with drawer bottom posts. Available in green felt, Mylar,
pegboard, fiberboard, foam, vinyl and shadow box.
PLASTIC BINS. These bins are designed to
store very small, loose items. Rounded corners
allow each bin to be quickly removed for handling,
counting and issuing purposes. Bins are available
in seven modular sizes and can be mixed within a
35 drawer or smaller.
AD NO. STMT8005
JOB No: STMT80015
File name:Vidmar How Do You Store
Original creator and date: Stan Winkler
Layout revisions and dates:SW060900LO/TY
33"
Drawer Interiors
BIN DIVIDERS AND LABEL HOLDERS. Four different models
of bin dividers are available. A bin label holder that slides onto
the front of the bin and/or bin divider is available.
PREPARED BY STAN WINKLER
MARKETING SUPPORT INC.
200 E. RANDOLPH., CHICAGO, IL 60601
FOR
STANLEY VIDMAR
5/C BLEED PG.
37"
DIVIDERS. Separate
each drawer into
compartments.
ADAPTER BUSHING. Use to change diameter of
drawer bottom posts to 1-1/4" (32mm) or 1-1/2"
(38mm). Each adapter is available in three
different sizes.
Number of units
MODULARITY.
Cabinets can be placed sideby-side, back-to-back or
stacked in a variety of configurations to meet new storage
demands.
STAK SYSTEM.
The Stanley Vidmar
Stak System makes
large, heavy, hard-tohandle items easily
accessible in less than 90
seconds. A built-in forklift
device allows immediate
retrieval by a single
operator. Removable
pallets can be adjusted
to fit available
space, maximizing
storage capacity.
MOBILE
CABINETS.
This mode allows
repair parts to be
taken directly to the
job site. Lock-in,
lock-out latches
prevent drawers from
accidentally opening while
the cabinet is in motion.
Compare…
MOBILITY.
Fully loaded cabinets are
easily moved using
built-in pallet bases to
accommodate changing
storage requirements.
CABINETS AND DRAWERS
PRINTOUT @ 50%
GROOVE TRAYS. Groove trays are specially designed to store
small-elongated items. The trays
are slotted to allow separation of
items with the use of Groove Tray
label holders. They are available in
three different sizes.
CARD TRAYS. Card trays provide the
necessary space for an efficient record
keeping system in your Stanley Vidmar
storage system. They are designed to
accommodate five sizes of index cards.
HANGING FILE FRAMES. Designed for use with a model 70
drawer or larger, one filing kit fills a standard drawer, holding
two rows of hanging files. Two letter-size steel frames and a
file divider are included.
FEATURES
CONFIGURATIONS
Stanley Vidmar
Modular Cabinets
provide an
array of
benefits
for parts,
maintenance,
MAXIMIZING SPACE.
Greater utilization of the cube
permits even greater storage
densities when using Stanley
Vidmar Modular Cabinets. This
typically reduces the space
required for storing the same
items by 50% or more.
FLEXIBILITY.
Drawer interiors can be
custom designed and easily
rearranged to meet changing
storage needs.
FIND ITEMS FASTER.
The high concentration of
items stored systematically in
a small area reduces stocking
and retrieval times.
and electronic
storage
Y
M
C
K
operations.
COMPLETE STORAGE
PROTECTION. Stanley
Vidmar cabinets with close-fitting drawers protect contents
from accidental damage, dirt
and dust. Strong metal drawer
dividers prevent contact and
impact damage to delicate
parts.
INVENTORY AT A GLANCE.
The ability to see a drawer’s
entire contents in one glance,
along with clear labeling and
good organization, eliminates
the possibility of running out
of stock without realizing it.
This also permits rapid
inventory checks.
IMPROVED SECURITY.
Items inventoried out of view
reduce the number of curious
and unauthorized personnel
entering the storage area.
CABINETS IN THE MEZZANINE MODE.
By stacking cabinets into
mezzanines, you free
up valuable floor
space. This design is
perfect for less
frequently requested
parts.
CABINETS IN THE
WORKSTATION MODE.
Workstations are
ideal for repairing
electrical or mechanical
items, or as a work desk.
TOOL TAXI.
Tools are easily transported in an
organized manner to the work site.
CABINETS IN THE WALK AROUND MODE.
Higher storage densities are achieved with Stanley Vidmar
modular cabinets, saving floor space for other storage and
operating needs. This space savings of typically 50% or
more permits rapid access to daily or highly requested parts.
ISSUE AREA.
Counter height cabinets are ideal for storing the most
frequently requested parts for quick fulfillment of orders.
There are six different housing heights that can
be ordered in six standard styles: standard,
shallow depth, small version, extra wide, extra
wide shallow depth and double wide. Eleven
standard colors are also available. Cabinets can be
filled with drawers, roll-out shelves, or stationary
shelves. Accessories like locking systems, doors
and drawer accessories can be ordered to further
customize a cabinet to fit your needs.
Drawers are available in 15 different usable
heights, ranging in size from 2-1/4" to 13-1/4".
Operating capacity is 400 pounds per drawer.
59"
44"
OPEN SHELVING
(36" X 12")
STANLEY-VIDMAR
MODULAR CABINET
A move from open shelving
182 sections
40 cabinets
IMPROVED WORKING
ENVIRONMENT.
The aesthetics of Modular
Storage Cabinets modernizes
your storage area and
improves morale.
Area occupied
30' x 75' (2250 sq.ft.)
21' x 30' (630 sq.ft.)
to modular cabinets releases
Retrieval time
3.2 min.
1.1 min.
Time required to take inventory
4 days
12 hours
Personnel in attendance
2
1
Workspace appearance
Cluttered, cramped,
inconvenient
Clean, open,
organized
1, 6 2 0 s q u a r e f e e t f o r o t h e r
uses, improves operations,
and speeds parts retrieval.
Drawer interiors can be customized in a vast number of
configurations. The Stanley Vidmar sales engineer will
help you select the proper cabinet, drawers and drawer
interior combinations to fit your specific needs whether
it’s a customized cabinet or a preconfigured product.
LABEL HOLDERS.
To identify compartment
contents.
Drawer Accessories
30"
27"
DRAWER PULLS.
To identify drawer contents.
PARTITIONS.
Span each drawer
either front-to-back
or side-to-side.
QUARTER TRAYS. Plastic quarter trays
that are available in three sizes fit into one
quarter of a Stanley Vidmar drawer and are
designed for storage of very small items.
LABEL HOLDERS. For instant identification of drawer
compartment contents, label holders snap directly to the
divider. Paper labels and vinyl protective shields included.
Comes in four different sizes.
BOTTOM POSTS AND INSERTS. Available in three sizes, the
posts and inserts have been designed to store items with center
holes thus providing maximum storage density and safety.
ADHESIVE BACKED LABEL HOLDERS. One by three-inch label
holder provides instant identification of drawer compartment
contents. Adheres directly to the divider, partition or plastic bin.
Four different models of bin dividers are available. Five bin label
holders are available.
DRAWER BOTTOM INSERTS. Designed to protect delicate
tools and instruments. Pegboard and fiberboard required for
use with drawer bottom posts. Available in green felt, Mylar,
pegboard, fiberboard, foam, vinyl and shadow box.
PLASTIC BINS. These bins are designed to
store very small, loose items. Rounded corners
allow each bin to be quickly removed for handling,
counting and issuing purposes. Bins are available
in seven modular sizes and can be mixed within a
35 drawer or smaller.
AD NO. STMT8005
JOB No: STMT80015
File name:Vidmar How Do You Store
Original creator and date: Stan Winkler
Layout revisions and dates:SW060900LO/TY
33"
Drawer Interiors
BIN DIVIDERS AND LABEL HOLDERS. Four different models
of bin dividers are available. A bin label holder that slides onto
the front of the bin and/or bin divider is available.
PREPARED BY STAN WINKLER
MARKETING SUPPORT INC.
200 E. RANDOLPH., CHICAGO, IL 60601
FOR
STANLEY VIDMAR
5/C BLEED PG.
37"
DIVIDERS. Separate
each drawer into
compartments.
ADAPTER BUSHING. Use to change diameter of
drawer bottom posts to 1-1/4" (32mm) or 1-1/2"
(38mm). Each adapter is available in three
different sizes.
Number of units
MODULARITY.
Cabinets can be placed sideby-side, back-to-back or
stacked in a variety of configurations to meet new storage
demands.
STAK SYSTEM.
The Stanley Vidmar
Stak System makes
large, heavy, hard-tohandle items easily
accessible in less than 90
seconds. A built-in forklift
device allows immediate
retrieval by a single
operator. Removable
pallets can be adjusted
to fit available
space, maximizing
storage capacity.
MOBILE
CABINETS.
This mode allows
repair parts to be
taken directly to the
job site. Lock-in,
lock-out latches
prevent drawers from
accidentally opening while
the cabinet is in motion.
Compare…
MOBILITY.
Fully loaded cabinets are
easily moved using
built-in pallet bases to
accommodate changing
storage requirements.
CABINETS AND DRAWERS
PRINTOUT @ 50%
GROOVE TRAYS. Groove trays are specially designed to store
small-elongated items. The trays
are slotted to allow separation of
items with the use of Groove Tray
label holders. They are available in
three different sizes.
CARD TRAYS. Card trays provide the
necessary space for an efficient record
keeping system in your Stanley Vidmar
storage system. They are designed to
accommodate five sizes of index cards.
HANGING FILE FRAMES. Designed for use with a model 70
drawer or larger, one filing kit fills a standard drawer, holding
two rows of hanging files. Two letter-size steel frames and a
file divider are included.
FEATURES
CONFIGURATIONS
Stanley Vidmar
Modular Cabinets
provide an
array of
benefits
for parts,
maintenance,
MAXIMIZING SPACE.
Greater utilization of the cube
permits even greater storage
densities when using Stanley
Vidmar Modular Cabinets. This
typically reduces the space
required for storing the same
items by 50% or more.
FLEXIBILITY.
Drawer interiors can be
custom designed and easily
rearranged to meet changing
storage needs.
FIND ITEMS FASTER.
The high concentration of
items stored systematically in
a small area reduces stocking
and retrieval times.
and electronic
storage
Y
M
C
K
operations.
COMPLETE STORAGE
PROTECTION. Stanley
Vidmar cabinets with close-fitting drawers protect contents
from accidental damage, dirt
and dust. Strong metal drawer
dividers prevent contact and
impact damage to delicate
parts.
INVENTORY AT A GLANCE.
The ability to see a drawer’s
entire contents in one glance,
along with clear labeling and
good organization, eliminates
the possibility of running out
of stock without realizing it.
This also permits rapid
inventory checks.
IMPROVED SECURITY.
Items inventoried out of view
reduce the number of curious
and unauthorized personnel
entering the storage area.
CABINETS IN THE MEZZANINE MODE.
By stacking cabinets into
mezzanines, you free
up valuable floor
space. This design is
perfect for less
frequently requested
parts.
CABINETS IN THE
WORKSTATION MODE.
Workstations are
ideal for repairing
electrical or mechanical
items, or as a work desk.
TOOL TAXI.
Tools are easily transported in an
organized manner to the work site.
CABINETS IN THE WALK AROUND MODE.
Higher storage densities are achieved with Stanley Vidmar
modular cabinets, saving floor space for other storage and
operating needs. This space savings of typically 50% or
more permits rapid access to daily or highly requested parts.
ISSUE AREA.
Counter height cabinets are ideal for storing the most
frequently requested parts for quick fulfillment of orders.
There are six different housing heights that can
be ordered in six standard styles: standard,
shallow depth, small version, extra wide, extra
wide shallow depth and double wide. Eleven
standard colors are also available. Cabinets can be
filled with drawers, roll-out shelves, or stationary
shelves. Accessories like locking systems, doors
and drawer accessories can be ordered to further
customize a cabinet to fit your needs.
Drawers are available in 15 different usable
heights, ranging in size from 2-1/4" to 13-1/4".
Operating capacity is 400 pounds per drawer.
59"
44"
OPEN SHELVING
(36" X 12")
STANLEY-VIDMAR
MODULAR CABINET
A move from open shelving
182 sections
40 cabinets
IMPROVED WORKING
ENVIRONMENT.
The aesthetics of Modular
Storage Cabinets modernizes
your storage area and
improves morale.
Area occupied
30' x 75' (2250 sq.ft.)
21' x 30' (630 sq.ft.)
to modular cabinets releases
Retrieval time
3.2 min.
1.1 min.
Time required to take inventory
4 days
12 hours
Personnel in attendance
2
1
Workspace appearance
Cluttered, cramped,
inconvenient
Clean, open,
organized
1, 6 2 0 s q u a r e f e e t f o r o t h e r
uses, improves operations,
and speeds parts retrieval.
Drawer interiors can be customized in a vast number of
configurations. The Stanley Vidmar sales engineer will
help you select the proper cabinet, drawers and drawer
interior combinations to fit your specific needs whether
it’s a customized cabinet or a preconfigured product.
LABEL HOLDERS.
To identify compartment
contents.
Drawer Accessories
30"
27"
DRAWER PULLS.
To identify drawer contents.
PARTITIONS.
Span each drawer
either front-to-back
or side-to-side.
QUARTER TRAYS. Plastic quarter trays
that are available in three sizes fit into one
quarter of a Stanley Vidmar drawer and are
designed for storage of very small items.
LABEL HOLDERS. For instant identification of drawer
compartment contents, label holders snap directly to the
divider. Paper labels and vinyl protective shields included.
Comes in four different sizes.
BOTTOM POSTS AND INSERTS. Available in three sizes, the
posts and inserts have been designed to store items with center
holes thus providing maximum storage density and safety.
ADHESIVE BACKED LABEL HOLDERS. One by three-inch label
holder provides instant identification of drawer compartment
contents. Adheres directly to the divider, partition or plastic bin.
Four different models of bin dividers are available. Five bin label
holders are available.
DRAWER BOTTOM INSERTS. Designed to protect delicate
tools and instruments. Pegboard and fiberboard required for
use with drawer bottom posts. Available in green felt, Mylar,
pegboard, fiberboard, foam, vinyl and shadow box.
PLASTIC BINS. These bins are designed to
store very small, loose items. Rounded corners
allow each bin to be quickly removed for handling,
counting and issuing purposes. Bins are available
in seven modular sizes and can be mixed within a
35 drawer or smaller.
AD NO. STMT8005
JOB No: STMT80015
File name:Vidmar How Do You Store
Original creator and date: Stan Winkler
Layout revisions and dates:SW060900LO/TY
33"
Drawer Interiors
BIN DIVIDERS AND LABEL HOLDERS. Four different models
of bin dividers are available. A bin label holder that slides onto
the front of the bin and/or bin divider is available.
PREPARED BY STAN WINKLER
MARKETING SUPPORT INC.
200 E. RANDOLPH., CHICAGO, IL 60601
FOR
STANLEY VIDMAR
5/C BLEED PG.
37"
DIVIDERS. Separate
each drawer into
compartments.
ADAPTER BUSHING. Use to change diameter of
drawer bottom posts to 1-1/4" (32mm) or 1-1/2"
(38mm). Each adapter is available in three
different sizes.
Number of units
MODULARITY.
Cabinets can be placed sideby-side, back-to-back or
stacked in a variety of configurations to meet new storage
demands.
STAK SYSTEM.
The Stanley Vidmar
Stak System makes
large, heavy, hard-tohandle items easily
accessible in less than 90
seconds. A built-in forklift
device allows immediate
retrieval by a single
operator. Removable
pallets can be adjusted
to fit available
space, maximizing
storage capacity.
MOBILE
CABINETS.
This mode allows
repair parts to be
taken directly to the
job site. Lock-in,
lock-out latches
prevent drawers from
accidentally opening while
the cabinet is in motion.
Compare…
MOBILITY.
Fully loaded cabinets are
easily moved using
built-in pallet bases to
accommodate changing
storage requirements.
CABINETS AND DRAWERS
PRINTOUT @ 50%
GROOVE TRAYS. Groove trays are specially designed to store
small-elongated items. The trays
are slotted to allow separation of
items with the use of Groove Tray
label holders. They are available in
three different sizes.
CARD TRAYS. Card trays provide the
necessary space for an efficient record
keeping system in your Stanley Vidmar
storage system. They are designed to
accommodate five sizes of index cards.
HANGING FILE FRAMES. Designed for use with a model 70
drawer or larger, one filing kit fills a standard drawer, holding
two rows of hanging files. Two letter-size steel frames and a
file divider are included.
HOW DO YOU STORE YOUR TOOLS AND ITEMS?
If you now
store tools and
maintenance
items like this
Stanley Vidmar
has a better way
using typically
5 0 % less space.
LOST TIME.
Poor organization,
poor control.
K
C
M
Service Parts
INTEGRAL LOCKING SYSTEM.
Maximum security is provided against
theft and unauthorized access.
ELIMINATE STORAGE OF
AIR. Stack inventory tightly.
HEAVY-DUTY SUSPENSION
SYSTEM. All drawers can hold up
to 400 pounds when fully extended.
Lasts for years of heavy-duty use.
GAIN EASY ACCESS. Full extension drawers
allow all items to be easily seen and retrieved.
CONTAIN STORED ITEMS. Add sides, back and
front to prevent spilling.
PROVIDE ORGANIZATION. Identify and subdivide
the drawer with labels, partitions, bins, and dividers.
PROTECT CONTENTS. Provide a housing to
safeguard contents from dirt and dust.
MODULAR DESIGN. Cabinets can
be placed side to side, back to back,
or stacked — completely adaptable
to every situation and application.
Save space, time
and increase
productivity.
49'
Maintenance
Parts
11 Grammes Road, P.O. Box 1151, Allentown, PA 18105-1151 Tel 800-523-9462 Fax 800-523-9934
www.stanleyvidmar.com Email: [email protected] www.stanleyworks.com
25'
29'
Go from this, 1421 sq. ft.
PARTS?
Electrical Parts
ALL ITEMS EASILY ACCESSIBLE.
The drawer is 25" square, which is
the average extended arm length.
Items can be reached from the front
or the side. Drawers are available in
15 different heights ranging in size
from 2-1/4" to 13-1/4".
BUILT-IN INEFFICIENCY.
Stretching, climbing, stooping, and searching.
Y
Fax 800-523-9934
YOUR
EVERYTHING WITHIN SIGHT.
Cabinet height is 59" maximum,
5" below average eye level.
WASTED SPACE.
Storing of air.
ACHIEVE HIGH DENSITY.
Pack space fully.
1-800-523-9462
HOW DO YOU STORE
The Solution
The Problem
The Need
STORAGE SYSTEMS
Stanley Vidmar professionals custom design products
and services. All it takes is one call. No matter where you
are, one of our sales engineers is nearby to assist you,
free and without obligation.
29'
to this, 725 sq. ft.
FORM# 20020
AD NO. STMT8005
PREPARED BY STAN WINKLER
MARKETING SUPPORT INC.
200 E. RANDOLPH., CHICAGO, IL 60601
FOR
STANLEY VIDMAR
5/C BLEED PG.
JOB No: STMT80015
File name:Vidmar How Do You Store
Original creator and date: Stan Winkler
Layout revisions and dates:SW060900LO/TY
PRINTOUT @ 50%
HOW DO YOU STORE YOUR TOOLS AND ITEMS?
If you now
store tools and
maintenance
items like this
Stanley Vidmar
has a better way
using typically
5 0 % less space.
LOST TIME.
Poor organization,
poor control.
K
C
M
Service Parts
INTEGRAL LOCKING SYSTEM.
Maximum security is provided against
theft and unauthorized access.
ELIMINATE STORAGE OF
AIR. Stack inventory tightly.
HEAVY-DUTY SUSPENSION
SYSTEM. All drawers can hold up
to 400 pounds when fully extended.
Lasts for years of heavy-duty use.
GAIN EASY ACCESS. Full extension drawers
allow all items to be easily seen and retrieved.
CONTAIN STORED ITEMS. Add sides, back and
front to prevent spilling.
PROVIDE ORGANIZATION. Identify and subdivide
the drawer with labels, partitions, bins, and dividers.
PROTECT CONTENTS. Provide a housing to
safeguard contents from dirt and dust.
MODULAR DESIGN. Cabinets can
be placed side to side, back to back,
or stacked — completely adaptable
to every situation and application.
Save space, time
and increase
productivity.
49'
Maintenance
Parts
11 Grammes Road, P.O. Box 1151, Allentown, PA 18105-1151 Tel 800-523-9462 Fax 800-523-9934
www.stanleyvidmar.com Email: [email protected] www.stanleyworks.com
25'
29'
Go from this, 1421 sq. ft.
PARTS?
Electrical Parts
ALL ITEMS EASILY ACCESSIBLE.
The drawer is 25" square, which is
the average extended arm length.
Items can be reached from the front
or the side. Drawers are available in
15 different heights ranging in size
from 2-1/4" to 13-1/4".
BUILT-IN INEFFICIENCY.
Stretching, climbing, stooping, and searching.
Y
Fax 800-523-9934
YOUR
EVERYTHING WITHIN SIGHT.
Cabinet height is 59" maximum,
5" below average eye level.
WASTED SPACE.
Storing of air.
ACHIEVE HIGH DENSITY.
Pack space fully.
1-800-523-9462
HOW DO YOU STORE
The Solution
The Problem
The Need
STORAGE SYSTEMS
Stanley Vidmar professionals custom design products
and services. All it takes is one call. No matter where you
are, one of our sales engineers is nearby to assist you,
free and without obligation.
29'
to this, 725 sq. ft.
FORM# 20020
AD NO. STMT8005
PREPARED BY STAN WINKLER
MARKETING SUPPORT INC.
200 E. RANDOLPH., CHICAGO, IL 60601
FOR
STANLEY VIDMAR
5/C BLEED PG.
JOB No: STMT80015
File name:Vidmar How Do You Store
Original creator and date: Stan Winkler
Layout revisions and dates:SW060900LO/TY
PRINTOUT @ 50%