ewton
Faries-McMeekan
www.fmmirrors.com
T O TA L R E S T R O O M S O LU T I O N S
Technical Data Sheet M60 Series Mirror
Technical Data Sheet NEWTON M60 Series Mirror
Phone: 800.498.3456
Standard Size Mirrors
Overall Size
W
H
16" x 20" (41 x 51 cm)
16" x 24" (41 x 61 cm)
18" x 24" (46 x 61 cm)
18" x 30" (46 x 76 cm)
18" x 36" (46 x 91 cm)
18" x 60" (46 x 152 cm)
24" x 30" (61 x 76 cm)
24" x 36" (61 x 91 cm)
24" x 48" (61 x 122 cm)
24" x 60" (61 x 152 cm)
30" x 36" (76 x 91 cm)
36" x 36" (91 x 91 cm)
48" x 36" (122 x 91 cm)
60" x 36" (152 x 91 cm)
72" x 36" (183 x 91 cm)
MATERIALS:
MATERIALS:
Frame
Steel,
1/2"1/2”
X 1/2"
X 1/2"X(13
x 13
x 13
mm)
channel
polished
finish.
One-piece
frame
with 90° frame
miteredwith
corners.
Steel back
Frame- Stainless
- Stainless
Steel,
X 1/2”
1/2”
(13
x 13
x 13
mm) with
channel
with
polished
finish.
One-piece
90°Galvanized
mitered corners.
with formed edges has horizontal mounting brackets located near top and bottom for hanging mirror. Locking devices secure mirror to concealed wall
Galvanized
Steel
back
with
formed
edges
has
horizontal
mounting
brackets
located
near
top
and
bottom
for
hanging
mirror.
Locking
hanger. Concealed Philips-head locking screws securely fasten mirror to wall hanger.
devices secure mirror to concealed wall hanger. Concealed Philips-head locking screws securely fasten mirror to wall hanger.
Mirror - No. 1 quality, 1/4" (0.6 mm) Float Glass selected for silvering, electrolytically copper-plated, guaranteed 10 years against silver spoilage. All edges
protected
shock
absorbing
filler
strips;
is protected
by full shock-absorbing,
water-resistant,copper-plated,
non-abrasive 1/8"
thick polystyrene
padding.
Mirror -by
No.
1 quality,
1/4”
(0.6
mm)back
Float
Glass selected
for silvering, electrolytically
guaranteed
10 years
against
silver spoilage. All edges protected by shock absorbing filler strips; back is protected by full shock-absorbing, water-resistant, nonabrasive 1/8” thick polystyrene padding.
Concealed Wall Hanger - 20 gauge (0.9 mm) prime galvanized steel.
INSTALLATION:
Concealed
Walllocks
Hanger
- 20 gauge
mm)Wall
prime
galvanized
steel.to wall at points across horizontal strap of hanger with screws furnished by
Surface
mounted,
to concealed
wall(0.9
hanger.
hanger
to be secured
Faries-McMeekan. For plaster or drywall on studs, provide concealed backing; backing must comply with local building codes. Hang mirror on wall hanger.
Lock mirror to wall hanger by tightening Philips head locking screws in bottom of frame.
INSTALLATION:
Surface
mounted, locks to concealed wall hanger. Wall hanger to be secured to wall at points across horizontal strap of hanger with
SPECIFICATION:
screws
furnished
Newton
Distributing.
For plaster
or channel,
drywall 1/2”
on studs,
backing;
backing
comply
with local
Mirror
shall
be framedby
with
one-piece
Stainless Steel
roll formed
x 1/2” xprovide
1/2” (13 concealed
x 13 x 13 mm),
with 90°
miteredmust
corners.
All exposed
surfaces
shall
have polished
finish.mirror
Float glass
mirror
shall beLock
guaranteed
against sliver
spoilage and
all edges
by shockinabsorbing,
water
resistant,
building
codes. Hang
on wall
hanger.
mirror 10
to years
wall hanger
by tightening
Philips
headprotected
locking screws
bottom of
frame.
non-abrasive 1/8” thick polystyrene padding. Galvanized steel back shall have integral horizontal hanging brackets located near the top and bottom. Mirror
shall be secured to hanger with concealed Philips head locking screws in bottom of frame.
SPECIFICATION:
Mirror Mirror
shall be
framed
withM60
one-piece
Stainless
Steel
rolland
formed
channel,
1/2” x 1/2” x 1/2”
(13 x 13Indiana.
x 13 mm), with 90° mitered
Framed
shall
be model
___________
(insert
width
height)
of Faries-McMeekan,
Inc., Elkhart,
corners. All exposed surfaces shall have polished finish. Float glass mirror shall be guaranteed 10 years against sliver spoilage and all
Note
- Mirrors
larger by
than
36” wide
or 24” in water
height are
suppliednon-abrasive
with wall hanger
thatthick
include
a welded lower
support
brace.
edges
protected
shock
absorbing,
resistant,
1/8”
polystyrene
padding.
Galvanized
steel back shall have
integral Special
horizontal
hanging
brackets
located
near
the
top
and
bottom.
Mirror
shall
be
secured
to
hanger
with
concealed
Philips head
Notes:
1. Other sizes available as special order.
locking screws in bottom of
frame.
2. All Faries-McMeekan framed mirrors are made to overall width & height.
3. Faries-McMeekan mirrors are manufactured to a tolerance of 1/8” (3.2 mm).
To wide
specifyor
special
sizes
use Series
andwith
widthwall
then height
in inches.
Ex. M60a1824
Note - Mirrors larger than4.36”
24” in
height
are number
supplied
hanger
that include
welded lower support brace.
5. Provide 1” minimum clearance at bottom of mirror for engaging locking screws.
Special Notes: 1. All Newton Distributing framed mirrors are made to overall width & height.
Illustrations
and Distributing
descriptions herein
are applicable
to production as
date of the Technical
2. Newton
mirrors
are manufactured
toofathe
± tolerance
of 1/8” Data
(3.2Sheet.
mm).
The manufacturer reserves the right to and does from time to time make changes and improvements in designs and dimensions.
3. Provide 1” minimum clearance
at
bottom
of
mirror
for
engaging
locking
screws.
© 2009 by Faries-McMeekan, Inc.
Illustrations and descriptions herein are applicable to production as of the date of the Technical Data Sheet.
The manufacturer reserves the right to and does from time to time make changes and improvements in designs and dimensions.
Ph: 877-837-7745 • FX: 617-969-4071 • EMAIL: [email protected]
PO Box 650159 • Newton, MA 02465 • www.newtondistributing.com