LORD OF THE LIGHTS
PIR luminaires
2
Light where you need it
– when you need it
Installing Ensto’s new
passive infrared luminaires
(PIR) is probably the single
most effective way to
reduce your lighting costs.
The PIR luminaires turn
on the lights when people
are in an area and switch
them off when it is empty.
During daylight hours, when
electrical lighting is unnecessary, the luminaires
automatically remain off.
Economy...
Security...
Ensto’s new PIR luminaires are
massive energy savers and can cut
your lighting expenses by up to 80%.
With shorter hours of service,
operation time is also reduced
- which in turn means less
maintenance and a dramatically
increased service life for both light
sources and luminaires.
There is always light when people
are around. Increased security is
particularly important in facilities
such as hospitals and homes
for the elderly. Lights turning on
automatically scares trespassers
away.
Convenience...
PIR-controlled premises also benefit
from improved usability. People do
not need to put down their loads
in order to turn on the lights when
entering a room.
...and flexibility.
PIR luminaires are available for both
wall and ceiling mounting, and for
interior as well as exterior use. They
are suitable for all premises, from
private tool sheds to large industrial
estates.
3
Making the best even better
Ensto’s PIR luminaires are unique
in supporting control of multiple
luminaires from one or more PIR
luminaires. All technology in the
new sensor is completely new:
new hardware, new processor, new
program, and new sensor element.
This has made what was already the
best PIR luminaire on the market
even better.
Earlier detection
The sensor is discreetly hidden
behind a lens inside the luminaire.
The brand-new lens has a wider,
130-degree angle, which detects
movement earlier.
All the necessary adjustments
The new PIR system has integrated
illumination, time, and movementsensitivity adjustments. Setting the
levels correctly is made easy with
LED lights.
4
PIR luminaires in blocks of flats
One PIR luminaire can control
many other units
Ensto’s PIR luminaires are designed
to allow control of multiple connected luminaires. A system can be
fitted with one or more PIR luminaires (‘masters’) and multiple slave
luminaires, so it can be activated
from various locations. This provides
the possibility to automatically control the lighting in large areas such as
an office building, block of flats, or
school.
Staircases
Garages
It is not necessary to illuminate the
entire staircase every time there is
movement in a building. Light is
required only on the floors where
there are people. If someone takes
the lift from the ground floor to the
third floor, only those two floors
need lighting. The same principle
applies if people choose to use the
stairs.
The lights are on whenever people
are around. This gives residents a
sense of security while frightening
off unwanted visitors. If there is an
area you never want to be completely
dark, you can use PIR luminaires to
give it a constant 5% light level
when there is no movement.
Laundry rooms, sheds, and
cellars
The light turns on automatically.
This is very practical since one does
not have to put down items such as
clothes or cardboard boxes in order
to reach a manual switch. The system is particularly useful to disabled
and elderly residents.
5
PIR luminaires in office
buildings and institutions
Ensto’s PIR luminaires always have a parallel
family of equivalent luminaires without PIR
(‘slaves’), making it easy to design uniformlooking lighting systems for large areas.
Last one out, turn off the lights!
Invisible vision
Commercial buildings are well suited
to PIR technology. As well as
stairwells and garages, commercial
buildings usually include shared
toilets, corridors, and technical
rooms. All of these have varying
amounts of traffic, and using PIR
adds up to substantial savings. Many
commercial buildings have the lights
on 24 hours a day, all year round.
In many cases this is a great waste
of money. Also, with PIR, there is no
chance of anyone forgetting to switch
off the lights.
The PIR sensor is discreetly located
within the luminaire. From the
exterior only a small lens is visible.
This makes installation easier and
greatly reduces the risk of vandalism
that accompanies an external unit.
Master and slave
PIR luminaires are called ‘masters’ when
they are connected to – and control – other,
non-PIR luminaires (‘slaves’). The PIR
luminaires, installed by the doors, are
indicated in the illustration by the
green wave cones.
6
Our third-generation control unit
For you to get the most
from your PIR luminaires,
they should fit the
environment in which they
are installed. Our new PIR
control unit is equipped
with the latest in software
and other technology,
making adjustments easier
than ever.
Illumination adjustment
An adjustable dusk/dawn level
ensures that the lights are
automatically switched off during
daylight hours. The light level
changes with the seasons, so turning
the lights on at the same time every
day does not do the trick. With
Ensto’s new PIR sensor, you can
choose exactly at what light level
the luminaires turn themselves on.
When the light is at the preferred
level, simply turn the ‘lux’ dial until
the LEDs inside the PIR unit change
colour. This sets the lighting to
switch on and off at that exact light
level every day, so you always have
light on when you need it.
Time adjustment
3–30 minutes’ adjustable delay
When movement is detected by
the PIR sensor, the luminaire
turns itself on, and it stays on for
as long as there is movement in
the area. However, the lights are
not immediately shut off after the
movement stops, as this would
result in luminaires switching on
and off too many times a day and
thus cause unnecessary wear to
the light sources. How long the PIR
luminaire stays on after movement
in the detection area has ceased is
adjustable between three and 30
minutes.
The more traffic, the longer the
delay
In order to optimise your energy
savings, the delay time should be set
according to the amount of traffic
in the area. Where there is much
traffic, the delay should be set to
be longer, to avoid the luminaires
switching on and off too often. Where
there is less traffic, the delay should
be set to be less, to save energy. A
laundry for a block of flats is an
example of a place where one
would expect little traffic, whereas
a corridor in an office building
typically has heavy traffic and
requires longer delays before the
lights turn off.
7
LED lights for easy adjustment
In the new sensor element we
have added LED lights. These start
flickering in certain situations to
aid various adjustments. The LEDs
are placed next to the PIR detector
behind the protective plastic cover.
Sensitivity adjustment
Test mode
Sometimes the area where a PIR
luminaire is installed is subject to
interference that can be picked up
by the sensor. Starting refrigerators
and electrical heaters are examples
of appliances that can cause
movement in the air. This can be
perceived to be physical movement
by the PIR sensor and thus turn on
the luminaires. The sensor allows
you to adjust the sensitivity to
ignore such interference.
Turning the SENS potentiometer
until the LED starts to flicker
causes the PIR system to enter a
180-second test mode. During this
period, the luminaire can register
movement and turns the light on for
a few seconds at a time when it does
so. This way you can determine the
size of the detection area and
thereby choose an appropriate
installation position for the
luminaire.
8
PIR reaction phases
Standard PIR
0%
In standby mode, the
luminaire is off. The
sensor constantly scans
for movement.
100%
100%
When the sensor registers
movement, PIR is activated
and the light level goes to
100%.
After the sensor stops
registering movement, the
light stays on for a
predetermined delay
period of between three
and 30 minutes.
0%
If the sensor does not
register movement in
that time, the lights turn
themselves off.
PIR with basic lighting
5%
In standby mode, the
luminaire operates at 5%
of maximum light level
and the sensor constantly
scans for movement.
100%
100%
When the sensor registers
movement, PIR is activated
and the light level increases
to 100%.
After the sensor stops
registering movement, the
light remains on for a
predetermined delay
period of 3–30 minutes.
5%
If the sensor does not
register movement during
the delay, the lighting
returns to its 5% basic
level.
9
Calculate your savings
Now you can compare Ensto PIR
luminaires to button-controlled
incandescent-type lighting from
our Web pages. We have created a
calculation tool allowing you to see
for yourself the potential of our PIR
luminaires. You can cut your annual
energy and service costs by over
80%! By upgrading your old lighting
system to Ensto PIR luminaires, you
get a user-friendly light system with
light only where and when you need
it.
Find out more about Ensto PIR
luminaires and see how much you
can save in your own staircase with
Ensto PIR luminaires.
4gXbcX]V[XVWcX]V
bhbcT\
B_PRT
;d\X]PXaTch_T
\P]dUPRcdaTa
2^]ca^[[TS[XVWcX]V
bhbcT\?8A
BcPXafT[[ #U[^^ab
RT[[Pa
BcPXafT[[#U[^^ab
RT[[Pa
0EA!$#(#4
?8A[d\X]PXaT
0EA!$#(4
b[PeT[d\X]PXaT
$!
"$
!!
?^fTaF
'
'
'
1P[[PbcF
%
%
%
!#'
'#
$!'
7^dab^UX[[d\X]PcX^]
_TaSPh
!#
$$
$$
4]TaVhR^]bd\_cX^]
ZFW_TaSPh
!(($!
#%!
!(#
6aP]Sc^cP[ZFW
!(($!
&$!#
("!#'
!&#%!%
%%
%%
n&!#!&$
n ' ("'
!g(F
d]XeTabP[[d\X]PXaT
fXcWT]TaVhbPeX]VQd[Q
@dP]cXch
C^cP[_^fTaF
www.ensto.com/pir
6aP]Sc^cP[ZFWhTPa
?aXRT_TaZFW
0]]dP[T]TaVhR^bc
“We’re cutting €17,500 from our electricity
bills every year by using Ensto’s PIR concept
for the lighting systems in stairwells and
garages. The housing co-operative consists
of 268 flats, with a total of 28 stairwells and
three garages.”
Lars Solli
Caretaker, Elgtråkket Housing Cooperative
0]]dP[^_TaPcX]VR^bc^UTgXbcX]VbhbcT\)
n&!#!&$
0]]dP[^_TaPcX]VR^bc^UR^]ca^[[TS[XVWcX]V?8A)
n ' ("'
4]TaVhbPeX]V)
4]TaVhbPeX]V4DA)
&#(
n$#!""&
10
CERTI FI C
AT
SY
T EM
ST
EM
CERTI FI CA
TI
IS O
IS O
00
1
90
14
01
Symbols
Safety earthed, class I
Degree of protection
DIN
40050 IEC
Location where
generally used
Screen protected
IP20
Dry, interior area,
low level of dust
Drip-proof
IP21
Wet area, provided with
overhead shelter
Rainproof
IP23
Exterior
Splash-proof
IP44
Damp area, wet area,
area susceptible to fire
Safety insulated, class II
Fixture can be chained
CEE
End fixture
The branching circuit may be tapped
3 x 2.5mm 2
Size of the mains connector
850 °C
Glow-wire test according to standard
IEC 695-2-1˚C
F
Luminaire for direct mounting on
normal flammable surfaces
Ceiling mounting
Ceiling mounting on flush-box
Ceiling or wall mounting
Ceiling or wall mounting on flush-box
Wall mounting
Wall mounting on flush-box
European norms –
Electrical Certification
FI
Approval registered in Finland
ON
YS
N
IO
S
Product information
11
PIR SENSOR LUMINAIRES
TYPE
CODE
DESCRIPTION
AVR254 PIR sensor luminaires with magnetic ballast.
AVR254.094
64 186 77 601 910
2 x 9 W TC/G23 230V 50 Hz
AVR254.294
64 186 77 601 880
2 x 9 W TC/G23 230V 50 Hz
Ø235...240
34
187
6
AVR254 PIR luminaires are all-round luminaires for both wet and dry spaces, indoors
and outdoors. These PIR luminaires can be widely used in bathrooms, storage rooms,
balconies, and entrance halls in private homes. Luminaire housing is made of light grey
polycarbonate and the diffuser is opal acrylic. Together with the AVR320 and AVR400 PIR
luminaires, our AVR254 PIR luminaires build up a uniform luminaire family. AVR254 PIR
luminaires can be installed either surface-mounted or recessed.
AVR254 PIR
61
IP54 4x2,5mm²
Ø254
BQKRt ihnm
AVR254 PIR
Note! Class I luminaire.
•
AVR254 PIR sensor luminaires with elctronic control gear
AVR254.0/94E
64 186 77 615 979
1 x 9 W TC-E/2G7 230/240V 50/60 Hz
AVR254.094E
64 186 77 601 859
2 x 9 W TC-E/2G7 230/240V 50/60 Hz
AVR254.294E
64 186 77 601 897
2 x 9 W TC-E/2G7 230/240V 50/60 Hz
AVL40 … AVL40.3
Ø340
34
•
AVR254 decor rings galvanized pulvercoated steel
AVL40
64 186 77 601 613
White
AVL40.1
64 186 77 601 620
Black
AVL40.2
64 186 77 601 637
Antique silver
AVL40.3
64 186 77 601 644
Steel
White
AVL42
AVR254-PIR spare parts and accessories
AVL39
64 186 77 616 198
AVR254 recessed mounting fastening
AVV254.1
64 186 77 611 889
Diffuser for AVR254 PIR luminaires, opal acrylic
CODE
DESCRIPTION
AVR320 PIR sensor luminaires with electronic control gear
AVR320.018/94E
64 186 77 616 099
9 W TC-E/2G7+18 W TC-DE/G24q-2 230/240 V 50/60 Hz
AVR320.0184E
64 186 77 604 102
2 x 18 W TC-DE/G24q-2 230/240 V 50/60 Hz
AVR320.2184E
64 186 77 604 485
2 x 18 W TC-DE/G24q-2 230/240 V 50/60 Hz
AVR320.0224CE
64 186 77 604 188
1 x 22 W T5C/2GX13 230/240 V 50/60 Hz
•
AVC320 PIR sensor luminaire with electronic control gear. Equipped with 3-pole EnstoNet NAC31.W
located on the side of the luminaire housing
Note! Protection class IP20.
AVC320.2184E
64 186 77 615 900
2 x 18 W TC-DE/G24q-2 230/240 V 50/60 Hz
•
AVR320-PIR spare parts
AVV320.1
64 186 77 611 902
• = Light sources included
Diffuser for AVR320 PIR luminaires, opal polycarbonate
6
128
AVL45 … AVL45.3
Ø400
AVR320 PIR sensor luminaires with 1-10V dimmable electronic control gear. Basic light level 5% and PIR
controlled light level 100%
AVR320.0186D
64 186 77 604 133
2 x 18 W TC-DE/G24q-2 230/240 V 50/60 Hz
AVR320.2186D
64 186 77 604 515
2 x 18 W TC-DE/G24q-2 230/240 V 50/60 Hz
•
AVR320 decor rings, galvanised pulvercoated steel
AVL45
64 186 77 604 195
White
AVL45.1
64 186 77 604 201
Black
AVL45.2
64 186 77 604 218
Antique silver
AVL45.3
64 186 77 604 225
Steel
Ø296...306
120°
AVR320 PIR luminaires are all-round luminaires with an innovative solution for easy and
fast installation. The luminaire housing is made of white polycarbonate, and the diffuser is
opal polycarbonate. For each light source type there is a separate whitepainted steel
reflectorplate for the best lighttechnical performance for each solution.
Together with the AVR254 and AVR400 PIR luminaires, the AVR320 PIR luminaires build
up a unified luminaire family. AVR320 PIR luminaires are suitable for both surface - and
recessed mountings. For even faster installations for surface mountings there is a model
AVC320 PIR, which has the EnstoNet NAC31.W connector on the side of the luminaire
housing and includes also the light sources (colour 830). AVC320 PIR installation and
connection can be performed without opening the luminaire.
TYPE
AVR320 PIR
43
IP44 5 x 2,5mm²
34
68
AQKRt ihnm
AVR320 PIR
Ø261
Ø320
AVR254 polycarbonate cover ring
AVL42
64 186 77 615 559
43
12
PIR SENSOR LUMINAIRES
TYPE
CODE
Ø380...390
6
85 42
AVR400 PIR luminaires are stylish and effective luminaires for entrance halls, offices, hotel
rooms and also many uses in homes. Luminaires are suitable for both wet and dry
spaces indoors and outdoors. The luminaire housing is made of white polycarbonate and
the diffuser of opal polycarbonate. With the polycarbonate and steel decor rings, the outlook
of the luminaire can be adjusted to suit various kind of interiors. AVR400 PIR luminaires,
along with the AVR254 and AVR320 PIR luminaires constitute Ensto’s three size
selection - a family with uniform outlook.
AVR400 PIR
300
IP44 5 x 2,5mm²
Ø400
AQKRt ihnm
AVR 400 PIR
DESCRIPTION
AVR400 PIR sensor luminaires with electronic control gear
AVR400.1184E
64 186 77 616 136
1 x 18 W TC-L/2G11 230/240 V 50/60 Hz
AVR400.0184E
64 100 41 175 478
2 x 18 W TC-L/2G11 230/240 V 50/60 Hz
AVR400.2184E
64 100 41 175 423
2 x 18 W TC-L/2G11 230/240 V 50/60 Hz
AVR400.218/94E
64 186 77 616 143
9 W TC-E/2G7 + 18 W TC-L/2G11 230/240 V 50/60 Hz
AVR400.018/184E 64 186 77 616 105
18 W + 18 W TC-L/2G11 230/240 V 50/60 Hz
AVR400.018/94E
64 186 77 616 112
2 x 18 W TC-L/2G11+2 x 9 W TC-E/2G7 230/240 V 50/60 Hz
AVR400.418/94E
64 186 77 616 129
2 x 18 W TC-L/2G11+2 x 9 W TC-E/2G7 230/240 V 50/60 Hz
AVR400.0554CE
64 100 41 175 447
1 x 55 W T5C/2GX13 230/240 V 50/60 Hz
•
AVL52 … AVL 54
•
•
Ø445
49
•
AVR400 PIR sensor luminaires with 1-10V dimmable electronic control gear; basic light level 5% and PIRcontrolled light level 100%
AVR400.0186D
64 186 77 601 224
2 x 18 W TC-L/2G11 230/240 V 50/60 Hz
AVR400.2186D
64 186 77 616 150
2 x 18 W TC-L/2G11 230/240 V 50/60 multipurpose Hz
•
AVR400.018/186D 64 186 77 604 409
AVL50 … AVL50.3
AVR400 PIR sensor luminaire with electronic control gear; equipped with an extra 2G7 lamp holder for
separate security package
AVR400.018/97E
64 186 77 602 801
2 x 18 W TC-L/2G11+9TC-E/2G7 230/240 V 50/60 Hz + 2G7
AVR400 polycarbonate decor rings
AVL52
64 100 41 179 520
AVL52/AL
64 100 41 179 537
AVL54
64 186 77 600 388
Ø500
42
White
Aluminium
Steel
AVR400 decor rings galvanized pulvercoated steel
AVL50
64 186 77 604 256
White
AVL50.1
64 186 77 604 263
Black
AVL50.2
64 186 77 604 270
Antique silver
AVL50.3
64 186 77 604 287
Steel
Diffuser for AVR400 luminaires, opal polycarbonate
BQKRt ijnm
AVR 1 PIR
IP44 3 x 2,5mm²
DESCRIPTION
6
CODE
AVR1 PIR sensor luminaires with electronic control gear
AVR1.09/94E
64 186 77 616 051
9 + 9 W TC-E/2G7 230/240 V 50/60 Hz
AVR1.29/94E
64 186 77 616 082
9 + 9 W TC-E/2G7 230/240 V 50/60 Hz
AVR1.094E
64 186 77 603 990
2 x 9 W TC-E/2G7 230/240 V 50/60 Hz
AVR1.294E
64 186 77 604 300
2 x 9 W TC-E/2G7 230/240 V 50/60 Hz
Ø260
TYPE
53
The AVR1 PIR luminaires are all-round luminaires made of impact-resistant, noncorrosive, weatherproof polycarbonate. They are suitable for both indoor and outdoor
use. Energy-saving light sources and accessories enable many types of
energy-saving installations in both public and private buildings.
AVR1 PIR
40
AVR400-PIR spare parts
AVV400.1
64 186 77 611 933
•
•
AVR1 PIR sensor luminaires with electronic control gear. Diffuser locked with security screw
AVR1.09/94E/S
64 186 77 616 068
9 + 9 W TC-E/2G7 230/240 V 50/60 Hz
AVR1.094E/S
64 186 77 616 075
2 x9 W TC-E/2G7 230/240 V 50/60 Hz
AVL21
AVR1 polycarbonate recessed frames
AVL21
64 100 41 173 696
AVL21/G
64 100 41 173 757
White
Brass
AVR1 polycarbonate decor rings
AVL28
64 100 41 170 091
AVL28/AL
64 100 41 175 324
AVL28/A
64 100 41 170 152
AVL28/G
64 100 41 170 121
White
Aluminium
Chrome
Brass
AVR1 spare parts
AVV1.2
AVV1.3
Diffuser for AVR1 PIR luminaires, opal polycarbonate
Diffuser for AVR1 PIR luminaires, opal polycarbonate, UV-stop
64 186 77 611 735
64 186 77 611 742
•
Ø295
2...30
AVR1 PIR sensor luminaires with magnetic ballast; diffuser locked with security screw
AVR1.094/S
64 186 77 604 591
2 x 9 W TC/G23 230V 50 Hz
AVR1.294/S
64 186 77 614 316
2 x 9 W TC/G23 230V 50 Hz
53
70
Ø265...270
AVL28
Ø302
40
• = Light sources included
13
PIR SENSOR LUMINAIRES
APKRt ih
PIR-JONO
IP44 5 x 2,5mm²
JONO PIR
L
Jono PIR luminaires build a flexible and energy saving system in bathrooms, toilets,
garages etc. Luminaire housing is made of whitepainted (RAL9010), extruded aluminium
and the diffurer is impact resistant polycarbonate. Stylish design and good lighttechnical
result makes Jono PIR an exellent luminaire for the most demanding sollutions.
CODE
87
TYPE
55
DESCRIPTION
Jono PIR sensor luminaires TC 11W with electronic starter; diffuser locked with security screw
AVR66.0114H/S
64 186 77 615 962
1 x 11 W TC-E/2G7 230 V 50 Hz, 425 mm
Jono PIR sensor luminaire TC11W ja T8 (Ø 26mm) with socket outlet and electronic starter
AVR66.1114HP
64 100 42 176 146
1 x 11 W TC-E/2G7 230 V 50 Hz, 481mm
AVR66.0154HP
64 100 42 173 060
1 x 15 W T8/G13 230 V 50 Hz, 612 mm
AVR66.0184HP
64 100 42 173 091
1 x 18 W T8/G13 230 V 50 Hz, 764 mm
Jono PIR sensor luminaire with 1-10V dimmable electronic control gear. Basic light level 5% and PIR
controlled light level 100%
AVR66.0186D
64 186 77 601 194
1 x 18 W T8/G13 230 V 50 Hz, 688 mm
AVR66.0366D
64 186 77 601 200
1 x 36 W T8/G13 230 V 50 Hz, 1298 mm
AVR66.0586D
64 186 77 601 217
1 x 58 W T8/G13 230 V 50 Hz, 1598 mm
Jono PIR sensor luminaire T5 (Ø 16mm) with electronic control gear
AVR66.0144E
64 186 77 616 167
1 x 14 W T5/G5 230/240 V 50/60 Hz, 657 mm
AVR66.0214E
64 186 77 616 181
1 x 21 W T5/G5 230/240 V 50/60 Hz, 957 mm
AVR66.0284E
64 186 77 600 913
1 x 28 W T5/G5 230/240 V 50/60 Hz, 1257 mm
AVR66.0354E
64 186 77 600 920
1 x 35 W T5/G5 230/240 V 50/60 Hz, 1557 mm
Jono PIR sensor luminaire T5 (Ø 16mm) with socket outlet and electronic control gear
AVR66.0144EP
64 186 77 616 174
1 x 14 W T5/G5 230/240 V 50/60 Hz, 734 mm
Jono accessories
AVL601
AVL602
AVL605
AVL607
AVL608
AVL617
64 100 42 175 569
64 100 42 175 576
64 100 42 175 590
64 100 42 175 767
64 100 42 174 531
64 186 77 601 095
Wire suspension set for JONO AVR66
Chain suspension set for JONO AVR66
In-line connector set for JONO AVR66
45° angle connector pair for JONO AVR66
90° angle connector pair for JONO AVR66
Pair of additional Jono end pieces
Jono PIR spare diffuser, opal polycarbonate
AVL640
64 186 77 601 767
Opal diffuser for AVR66.011 luminaires
AVL641
64 186 77 600 524
Opal diffuser for AVR66.015 luminaires
AVL642
64 186 77 600 531
Opal diffuser for AVR66.018 luminaires
AVL644
64 186 77 600 555
Opal diffuser for AVR66.036 luminaires
AVL645
64 186 77 600 562
Opal diffuser for AVR66.058 luminaires
AVL650
64 186 77 615 641
Opal diffuser for AVR66.014 luminaires
AVL651
64 186 77 615 665
Opal diffuser for AVR66.021 luminaires
AVL652
64 186 77 615 689
Opal diffuser for AVR66.028 luminaires
AVL653
64 186 77 615 702
Opal diffuser for AVR66.035 luminaires
Jono PIR spare diffuser, clear polycarbonate
AVL640.1
64 186 77 601 774
Clear diffuser for AVR66.011 luminaires
AVL641.1
64 186 77 601 781
Clear diffuser for AVR66.015 luminaires
AVL642.1
64 186 77 601 798
Clear diffuser for AVR66.018 luminaires
AVL644.1
64 186 77 601 811
Clear diffuser for AVR66.036 luminaires
AVL645.1
64 186 77 601 828
Clear diffuser for AVR66.058 luminaires
AVL650.1
64 186 77 615 658
Clear diffuser for AVR66.014 luminaires
AVL651.1
64 186 77 615 672
Clear diffuser for AVR66.021 luminaires
AVL652.1
64 186 77 615 696
Clear diffuser for AVR66.028 luminaires
AVL653.1
64 186 77 615 719
Clear diffuser for AVR66.035 luminaires
• = Light sources included
JONO PIR WITH SOCKET OUTLET
•
L
55
•
87
Jono PIR sensor luminaires TC 11W ja T8 (Ø 26mm) with electronic start
AVR66.0114H
64 100 42 172 858
1 x 11 W TC-E/2G7 230 V 50 Hz, 425 mm
AVR66.1114H
64 100 42 172 032
1 x 11 W TC-E/2G7 230 V 50 Hz, 425 mm
AVR66.0154H
64 100 42 172 889
1 x 15 W T8/G13 230 V 50 Hz, 536 mm
AVR66.0184H
64 100 42 172 919
1 x 18 W T8/G13 230 V 50 Hz, 688 mm
AVR66.0364H
64 100 42 172 971
1 x 36 W T8/G13 230 V 50 Hz, 1298 mm
AVR66.0584H
64 100 42 173 008
1 x 58 W T8/G13 230 V 50 Hz, 1598 mm
14
Technical information
Voltage
220–240 V / 50–60 Hz
Relay A, B
;DG
220–240 V, 2 A
0–50 V, 2 A SELV
B4=B
C4BC
Illumination adjustment
B4=B
C4BC
;DG
C8<4
1 lx–∞
-AX
Delay time adjustment
3–30 minutes
∞
MIN
MIN
MIN
-IN
LX
LX
²
²
Detection distance
Tangential to the luminaire, 5–7m
Directly toward the luminaire, 2.5m
Detection angle
135 degrees
M
²
M
M
M
M
²
M
M
Light sources
Product
15
Abbrev.
Wattage
(W)
Cap
Compact
fluorescent lamp
TC
9
G 23
600
8,000
Compact
fluorescent lamp
TC-E
9
11
2G7
2G7
600
900
8,000
8,000
Compact
fluorescent lamp
Compact
fluorescent lamp
TC-DE
TC-L
Luminous
Average
flux (lm) lifetime (h)
18 G 24 q-2
18
2 G 11
1200
1200
Product
Abbrev.
Wattage
(W)
Cap
Luminous
Average
flux (lm) lifetime (h)
Circular
fluorescent lamp
T5C
22
55
2 GX 13
2 GX 13
1800
4200
8,000
8,000
Fluorescent lamp
T8
15
18
36
58
G 13
G 13
G 13
G 13
950
1350
3350
5200
15,000
15,000
15,000
15,000
Fluorescent lamp
T5
14
21
28
35
G5
G5
G5
G5
1200
1900
2600
3300
20,000
20,000
20,000
20,000
8,000
15,000
Light distribution
η=43%
AVR254.094E
η=51%
AVR320.0184E
η=48%
AVR400.0184E
η=51%
AVR1.094E
30
30
40
30
30
40
30
60
80
60
90
120
90
120
160
120
150
cd/klm
η=66%
AVR66.0364E
30
30
60
90
120
150
cd/klm
200
30
cd/klm
60
90
120
cd/klm
cd/klm
WXX117/04/2006/5 000/FRIK Prosjektlab/Hämeen Kirjapaino Oy
BUILDING TECHNOLOGY
ENSTO ELECTRIC OY
VECKJÄRVENTIE 1, P.O. BOX 110
06101 PORVOO, FINLAND
TEL. +358 204 76 21
FAX +358 204 76 2753
[email protected]
WWW.ENSTO.COM