AVALON ROUND EXTENSION DINING TABLE
HARDWARE
4 - plate
bolts
8 - tabletop 8 - small
bolts
spring washers
12 - large
flat washers
12 - large
spring washers
8 - small
flat washers
2 - wood
dowels
8 - hex
nuts
Missing hardware? Please call 800.606.6387 for replacements.
Thank you for purchasing the Avalon Round Extension
Dining Table. This page lists all the contents included in
the box. Please take time to identify the hardware as well
as the individual components of this product. As you
unpack and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
TOOLS REQUIRED
large allen wrench
(included)
small allen wrench
(included)
hex wrench
(included)
(We recommend the use of hand tools instead of power tools)
COMPONENTS
B
NOTE: Do not
over tighten
the bolts
mounting
plate
A wood dowel
1 - tabletop
(leaf pre-attached)
plate bolt
1 - pedestal
large spring
washer
B
1 - mounting
plate
Made in Thailand - r05
4 - legs
pedestal
large flat
washer
1 A) Insert 2 wood dowels into pedestal as shown.
B) Fit dowels of pedestal into corresponding holes of mounting
plate as shown. Attach mounting plate with 4 plate bolts, 4
large spring washers and 4 large flat washers as shown.
Secure, but do not over tighten, bolts with a large allen wrench.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 1 of 2
AVALON ROUND EXTENSION DINING TABLE
hex nut
large spring washer
large flat washer
tabletop
bolt
small spring
washer
leg
assembly
small flat
washer
leg
tabletop
2 With the assistance of another adult, position unit
upside down onto a clean, padded surface as shown. Fit
threaded bolt of each leg into corresponding holes of
pedestal. Secure each leg with 1 hex nut, 1 large spring
washer and 1 large flat washer, using a hex wrench.
INSTRUCTIONS
TO RELEASE
LEAF EXTENSION
3 With the assistance of another adult, position tabletop face
down as shown. Attach leg assembly to tabletop with 8
tabletop bolts, 8 small spring washers, and 8 small flat washers,
using a small allen wrench. Carefully position unit upright.
Assembly is now complete.
VIEW FROM UNDERNEATH
TABLETOP
• Turn clockwise
to lock
• Turn counterclockwise to unlock
90º
2 With the assistance of another adult, slide the tabletop
sections apart. Carefully remove leaf and set aside. Close
tabletop sections and relatch locking clasps.
Assembly is now complete.
CLEANING & CARE
1 A) Locate 4 locking clasps underneath tabletop
assembly.
B) To unlatch, turn each handle 90º counter-clockwise.
This will release the tabletop sections.
Made in Thailand - r05
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
Customer Service 800.967.6696 | Latest instructions available at www.crateandbarrel.com
Page 2 of 2