WIFI MEDIA PLAYER QUICK SETUP GUIDE
CONNECTING MEDIA PLAYER TO WIRELESS NETWORK: (*11n Wireless router is highly recommended)



Connect the Media Player to TV with supplied A/V or HDMI (Not Supplied) cable.
Plug the provided Wifi USB dongle to one of the USB port located at the rear of the Media Player.
Plug the power connection and Turn it on
You will now see the main screen
1. Select Setup and press Enter> Go to Networks Tab>
2.Select Wireless Setup and Press Enter>
3.Select Connection1 under the Profile Name > Press Enter
4.Select Infrastructure (AP) under Connection mode and Press
Enter
5.Now you will see your Network Name under SSID, Select it
and Press Enter
6. Enter your Network Password (Same Password to connect
internet) when you are prompted. Select OK > Press Enter
1
7. You will see the Test Connection on Screen, it may take a
while.
8. If the connection is successful, you will see this screen,
Press Enter
9. Now you can see the IP address next to Wireless Setup.
You have now success fully connected the media player to
your network. Press Home button on your remote.
If the connection is not successful you will see the following
screen.
There are number of factors which block the access to
Network.
1. Make sure you have entered the right network password
(Same Password to connect internet).
2
2.
Make sure no firewall is turned on in your Wireless router
as well as in Computer.
3.
If your Wireless router is 11g (Old), place the media player
close to it as 11g does not have enough signal range and
data transfer rate compared to 11n.
4.
Take the USB WiFi dongle out and plug it in to the other
USB port.
5.
If the wireless password encryption is WEP, change it to
WPA and try. (Refer your router manual)
SETTING UP THE COMPUTER
There are two options available to stream your media files stored on computer across the network
1.) UPNP feature - Using Serviio Media Server Software ( Available for MAC & Windows)
Click here to download the step by step instructions:
http://support.kaiserbaas.com/Knowledgebase/Article/GetAttachment/214/719
Please click here to download the Serviio software for MAC
http://support.kaiserbaas.com/Knowledgebase/Article/View/263/33/serviio---mac
Please click here to download the Serviio software for Windows
http://support.kaiserbaas.com/Knowledgebase/Article/View/262/33/serviio---windows
2.) NET feature – (Only supports Windows Operating Systems)
Your Windows user account must have a password in order to establish the connection. If you do not have a password, follow these
steps to create. If you already have a password, skip this and go to Creating Share Folder.
Windows Vista/ Windows 7
1.Click on Start > Select Control Panel >Click on User accounts
and family safety
2. Click on User Accounts, Click Create Password for your
account
3. Type your Password and click Create Password
3
Creating Share Folder
For security reason and easy navigation we recommend creating a new folder and adding your media files on to it instead of sharing
the whole drive.
Please follow these steps:
1.
2.
3.
Create a New Folder on your computer and name it (E.g. Media)
Add your Media Files such as Movies and songs in to that folder.
Right Click on the created folder > Select Properties > Select Sharing Tab> Click Advanced Sharing > Press Continue (If you are
Prompted )> Enable Share this Folder > Click Permissions
4.
Select Everyone > Tick Full Control Under Allow > Click Apply > Click OK> Click OK>Click Close
4
STREAMING ON MEDIA PLAYER
1.Select Movie > Press Enter
2.Select All Tab with Right/Left arrow keys>Select Net with
Up/Down arrow Keys> Press Enter
3. Select your Workgroup >Press Enter (Workgroup is
default name of network group. You can check your
workgroup name on your Computer description. Right
Click on Computer> Select Properties )
If you can’t see your WORKGROUP name there, reboot the
Media Player by unplugging the power cable.
5. Select the Net User ID text box > Press Enter and type
your windows user account with the keyboard interface
Select OK >Press Enter, repeat the same process for
entering Password > Select OK and Press Enter.
4. Now you can see the computers connected to your
workgroup. Select the Computer which you want to
stream from, Press Enter.
5
6. Now you will see following screen with Logon
Successful, Select the folder that contains Movies, Press
Enter.
7. Choose play folder option for Playing all Movie files on
that folder or select Browse folder to select a specific
movie file, Press Enter.
*If you see the login fail message, Please try typing the
username and password carefully.
*Check the windows firewall and turn it off if it is turned
on
*Restart computer
6