Wastewater audits What is a wastewater audit? A wastewater audit determines the percentage of water flowing through a water supply meter that does not return to the Watercare wastewater network for transport and treatment. The intention of the wastewater audit is to help align the amount you pay for wastewater services with your actual volume of discharge. Who can apply for a wastewater audit? All non-domestic customers who are charged volumetrically for their wastewater are eligible to apply for a wastewater audit. What are the steps in the wastewater audit process? 1. Decide if a wastewater audit is necessary All non-domestic water meters are given an ‘industry type’ based on the predominant activity associated with the meter. Each industry type has a wastewater percentage which represents the proportion of the water supplied that will be charged for volumetric wastewater services. Watercare’s industry types and wastewater percentages are: Industry type Percentage of water consumption typically discharged to the wastewater network Wastewater percentage General commercial (standard commercial premises, e.g. office) Accommodation Community facility/church Abattoir 85% - 100% 95% 80% - 100% 90% 75% - 95% 85% 70% - 90% 80% Agriculture 5% - 25% 15% Concrete manufacturing 0% - 15% 5% Retail shop/cafe/restaurant Warehouse/postal/transport Sports/recreation facility Education and training facility (no irrigated grass fields) Industrial/general manufacturing Hospital or medical clinic Pool Laundry Food manufacturing School (with irrigated grass fields) Beverage manufacturing Metal, glass or construction material manufacturing If you believe that your actual percentage of wastewater discharge falls outside the typical percentage range given for your industry type, you may wish to apply for a wastewater audit. Important: It is worth noting at this stage that the audited wastewater percentage, once calculated, must be outside the relevant typical percentage range for it to be applied to your account. Please also note: the wastewater percentage reflects the annual volume of wastewater discharge and accounts for seasonal variations. Amendments to your wastewater percentage will not be made throughout the year. 2. Submit an application form If you believe a wastewater audit is required, download a non-domestic wastewater audit application form from www.watercare.co.nz > business tab > forms > business forms and submit it, along with any supporting information, to [email protected]. You can also call us on 09 442 2222 if you have any questions. When we receive your application form, we will contact you to discuss: • your business operations and how water is used • the processes for which a percentage of the water supplied is not returned to the wastewater network and how to measure this volume • a suitable date and time for a site visit, if required • the estimated fee for the audit. 3. Site visit The wastewater auditor may visit your site to confirm wastewater discharge volumes and any other required data. 4. Install meters and measure consumption In some circumstances, we may ask you to install water-check meters, undertake periodic wastewater flow monitoring or, in exceptional cases, install a wastewater meter. It is recommended that water-check meters are monitored for two to four weeks, depending on the nature of the wastewater. 5. Temporary wastewater discharge monitoring In some cases it may be necessary to visit your site again to physically monitor the volume of wastewater being discharged at your property. The complexity of your discharge will decide the time length of monitoring required. Additional visits may also be needed if your discharge varies throughout the year. 6. Analysis Once the required information is gathered, the wastewater auditor will calculate the volume and percentage of water that does not return to the wastewater network and send a report and wastewater declaration form to you. 7. Sign the wastewater declaration form Once you are satisfied with the results of the wastewater audit, sign and return the wastewater declaration form. The new reduced wastewater factors will take effect from your next billing cycle and will appear, along with the audit service fee, on your next bill. How much will the audit cost me and how do I pay? Watercare operates at minimum cost with all collected revenue invested either in infrastructure and equipment or in operating costs. As a result, the wastewater audit process is run on a cost-recovery model, meaning all costs are to be met by the customer requesting the audit. Please refer to our current non-domestic water, wastewater and other charges for the cost of a wastewater audit. Audits requiring more detailed analysis may take more than two hours to complete. The fee is payable by the applicant. Watercare will discuss all costs with the applicant before proceeding with the audit. If an audit is not carried out, there will be no fee. If you choose to install a water-check or wastewater meter or undertake periodic wastewater flow monitoring, you will be responsible for any associated costs. For your convenience, the audit fee is charged to your Watercare account once the audit is completed. Is reassessment possible if my business changes? We understand that businesses change, and want to ensure that the basis for charging is current and accurate. All audits are generally reviewed after two years. If there is a change in your wastewater volumes before your two-year review, please contact us for a re-audit. All re-audits attract an audit fee. For more information or assistance, contact us at [email protected] or on 09 442 2222.
© Copyright 2026 Paperzz