F1-62
Mounting Hoods and Ballasts for
Mercmaster II HID Lighting Fixtures
Hood and Ballast Housings are Copper-Free Aluminum (4/10 of 1%).
Description
Hub Size
(Inches)
Catalog Number
Copper-Free Aluminum
3/4
1
LPA-75
LPA-100
3/4
1
LPC-75
LPC-100
3/4
1
LPWB-75
LPWB-100
1-1/4
LPS-125
LPS-150
Mounting Hoods
Pendant
One Hub,
Rigid or Flexible Mounting
Ceiling
Five Hubs,
Four Close-Up Plugs
Wall
Five Hubs,
Four Close-Up Plugs
25° Stanchion
One Hub
1-1/2
Mounting Adapter
C^-*-^
> __^
T
Permits use of Mercmaster II pendant hood on existing V-51 and Mercmaster I mounting hoods. Remove Mercmaster I ballast body from existing mounting hood, thread in adapter and attach wires to
Mercmaster II.
LPAD-1
Mercmaster II 50/250 Watt
Type
L f©»?
I
5-1/2"!
Dia Thd.'
ThH '
'I Dia.
Ballast Body Number
Lamp Globe/
Watts 12" Refractor 8" Refractor 120V
1
1
1
n
; 8
yfj
-flm
-3/8" L_
Dia. Thd.
208V
240V
277V
480V
-MT
-MT
-MT
-DT
-MT
-MT
-MT
-480
-480
-480
H.P. Sodium
High Power Factor
(Min. P.F. 90%)
50
70
100
150
LPB50L
LPB70L
LPB100L
LPB150L
LPBLH50R
LPBLH70R
LPBLH100R
LPBLH150R
-DT
-MT
-MT
-MT
Metal Halide
Constant Wattage
(Min. P.F. 90%)
100
175
250
LPB100H
LPB175H
LPB250H
LPBH100R
LPBH175R
LPBH250R
-MTMED -MTMED -MTMED -MTMED -480MED
-MT
-MT
-MT
-MT
-480
-MT
-MT
-MT
-MT
-480
Mercury
Constant Wattage
(Min. P.F. 90%)
100
175
250
LPB100M
LPB175M
LPB250M
LPBC100R
LPBC175R
LPBC250R
-MT
-MT
-MT
-MT
-MT
-MT
-MT
-MT
-MT
-MT
-MT
-MT
-480
-480
-480
Mercmaster II 250/400 Watt
I 1
Add Voltage Suffixes*
-MT
-MT
-MT
Refractor/
Reflector Lens
H.P. Sodium
High Power Factor
(Min. P.F. 90%)
250
400
LPBL250
LPBL400
-MT
-MT
-MT
-MT
-MT
-MT
-MT
-MT
-480
-480
Metal Halide
Constant Wattage
(Min. P.F.90%)
400
LPBH400
-MT
-MT
-MT
-MT
-480
Mercury
Constant Wattage
(Min. P.F. 90%)
400
LPBC400
-MT
-MT
-MT
-MT
-480
Note: "MT" (multi-volt) ballasts can be operated at an input voltage of either 120, 208, 240 or 277. "DT" (dual tap volt) either 120 or 277V.
Effective October, 1993
Copyright 1993 Printed in U.S.A.
PAGE 62
1701 West Wellington Avenue
Chicago, Illinois 60657
F1-51
Mercmaster II Enclosed and
Gasketed HID Lighting Fixtures
High Pressure Sodium, Mercury Vapor and Metal Halide Mogul Base
Lamp. UNILETS® for Use with Threaded Metal Conduit.
• Heat barrier isolates capacitor from
ballast. Standard non-PCB biodegradable capacitors installed in separate
compartment.
• Mogul socket is furnished with 200°C
welded leads, prewired to the ballast.
• Porcelain socket assures trouble-free
operation in high ambient installations.
• HID Stylmaster fixtures ideal where
mounting height is restricted and remote HID ballasts are required.
• Guards protect globes from damage.
Keyhole slots allow easy installation
and are secured with stainless steel
screws.
• Prismatic glass globes and glass refractors are standard (plastic refractors
also available) and thread directly into
fixture housing. Eliminate glare and
provide uniform light distribution.
• Vented reflectors result in cooler, dirtfree operation, increased lumen output.
• Reflectors secured to mounting hood
with screws (furnished).
• Choice of reflectors styles: white porcelain enamel or fiberglass-reinforced
polyester; standard dome or 30° angle.
• Optional photocell provides automatic "on-off" control.
• All Mercmaster mounting hoods have
provision for easy field installation of
fuses in fixtures (see fuse kit listings).
Standard Materials
• Mounting hoods, ballast bodies and
guards: aluminum (copper-free - 4/10
of 1% max.).
• Reflectors:fiberglass-reinforcedpolyester.
• Globes: 50W-100W, threaded prismatic glass; 150W, 175W, and 250W,
threaded heat-resistant prismatic glass.
• Refractors: 50W-150W, heat-resistant
prismatic glass and plastic; 175W400W, prismatic glass.
• Enclosed reflector: etched Alzak aluminum (copper-free - 4/10 of 1 %) with
sealed, tempered heat and impact resistant lens.
Options
• Fuses for fixtures. See listings.
• MV and MH fixtures for quartz auxiliary lamps. Relay switch installed in
fixture when specified. Add suffix -MTE
to fixture catalog number for 120V thru
277V, and suffix -480E to fixture catalog number for 480V fixture.
• "Rapid Smart Starter" emergency option, available for 50W-150W HPS only.
Add suffix -HRE. See page F1-51.
Compliances
• UL Listed.
• UL Standard 1572, 844 and 595
(Marine).
• Suitable for use in wet locations and
outdoor saltwater locations.
• Class I, Division 2, Groups A,B,C,D.
Class II, Division 1 and 2, Groups
E,F,G.
References
• For additional data on lamp and lighting fixture selection, see general introduction to catalog.
Note: Fixtures equipped with optional photocell or
quartz auxiliary lamp do not comply with UL requirements and are not suitable for use in classified locations.
Conduit Hub
with Setscrew
Stainless Steel
Pin, Nut and Bolt
.Safety
/ Hinge
Silicone
Rubber
Body
Gasket
Non-PCB
Capacitor
Encapsulated
HPS
Ignitor
Ballast Class H
Insulation
High Temperature
Nickel Plated
Socket
Silicone
Rubber
Globe Gasket
Standard Finishes
• Mounting hoods, ballast bodies,
guards: EPOXY-CLAD finish. Two-coat
baked finish, electrostatically applied
for complete uniform surface protection.
• Polyester reflectors: natural finish.
Effective October, 1993
Copyright 1993 Printed in U.S.A.
Appleton
•
I ELECTRIC COMPANY
1701 West Wellington Avenue
Chicago, Illinois 60657
RAGE 51