Sandvik
Conveyor Components
2/2004
SKIRT BOARD SEALING
ROXEL -sealing profiles are suitable especially for dusting
fine material like peat, chip and powdery materials. The
profiles are fixed to the guiding skirt board construction of
customer’s own one. The delivery includes all the needed
ROXEL1
ROXEL3
fixing elements. ROXEL -sealing profiles are easy to place
onto the steel skirt boards under the construction or to the
existing ones according to enclosed dimensions.
ORDERING EXAMPLE:
ROXEL1 - U
66 m
board distance A
13 to the hopper plate
recommended interval 300
Type code
(wear adjustment margin)
Material of the wear part
K = RUBBER
U= POLYURETHANE
Type of spare part for
the fixing clips:
ROXEL 1
ROXEL 10 - F - K
Type of spare part for
the wearable part:
ROXEL 1 - T - K (rubber)
ROXEL 1 - T - U (urethane)
board distance A
13 to the hopper plate
Quantity of skirt board sealing (m)
Delivery includes fixing clips, screws and bolts for the fixing
intervals of 300 mm.
ROXEL1 consists of a rubber plate band and is a skirt
board sealing, for a universal purpose, used in the board
constructions on the loading points. Rubber seal is pushed to
the chute wall with the help of clips and an angle bar. The
angle bar is available as 3 metres long bars.
ORDERING EXAMPLE:
ROXEL3
24 m
recommended interval 300
(wear adjustment margin)
Type code
Quantity of skirt board sealing (m)
ORDERED QUANTITY TO BE ROUND OFF TO
THE FULL ELEMENT LENGTHS OF 3 m
ROXEL 3
Type of spare part for
the fixing clips:
ROXEL 10 - F - U
Type of spare part for
the skirt urethan:
ROXEL 3 - T
LOCATION OF THE SEALING PROFILES ON THE FLAT
BELT
When using a flat belt, the sealing profile must be fixed on to
an inclined additional part. With the ROXEL3 it is always
recommended to use the extra board inside the chute. A piece
of approximately ~30 mm is cut off from the tip of ROXEL3 in
flat belt applications. Profiles to be ordered according to the
ordering examples below.
board
distance
A
Ordering
example for
the profile:
ROXEL 1 - P
board
distance
A
Ordering
example for
the profile:
ROXEL 3 - P
ROXEL 3 delivered as a 3 metres element. Ordered quantity
will be rounded off to full element lengths. Delivery consisting
of fixing clips, screws and bolts 10 pcs/element.
The sealing part of the ROXEL 3 -multilip, sealing against the
belt, is of wear resistance polyurethane. Due to three
different surfaces against the belt, the tightness is very good.
Polyurethane is casted on a hot galvanized profile which
stiffens and makes the sealing construction solid. It also
guarantees good tightness in the direction of the belt. Fixing
and adjustment of the sealing element with different methods
in the chute construction is easy.
Note !
ROXEL 1 and 3 skirt board sealings to be
ordered according combined sealing meters. For
example, if the loading point and skirts are
3 meters long, order the skirtboard in 6 meters.
Recommended value for the board distance A
B elt w idth
Troughing angle
B
α = 0°
α = 20°
α = 30°
α = 45°
500
650
800
1000
1200
1400
1600
330
460
590
760
900
1100
1260
320
440
570
740
880
1060
1210
310
420
550
720
870
1020
1170
280
400
490
640
760
920
1040
We reserve the right for modifications without prior notice.