Bronze Terminals, Taps TYPE CFT Tee Connector For Cable To Flat Bar Tap A cable run to flat bar tap tee connector. Designed for one 1/4 inch bar, Fig. 1 and for two ¼ inch bars spaced 1/4 inch apart, Fig. 2. Material Note Copper Alloy • Can also be furnished upon specification to accommodate additional Hardware bars, other bar spacing, and other drilling or any combination thereof. Everdur-bolts, nuts, and lockwashers. • Pad size and drilling can also be furnished to conform to NEMA standards. L 3 1 3/4 3 A FIG. 1 5/8 1 3/4 Ordering Information CATALOG NUMBER CFT21-1-2N CFT30-1-2N CFT30-1-3N CFT50-1-2N CFT50-2-2N CFT50-1-3N CFT75-1-2N CFT75-2-2N CFT75-1-3N CFT100-1-2N CFT100-2-2N CFT100-1-3N CFT100-2-3N CFT100-1-4N CFT150-1-2N CFT150-2-2N CFT150-1-3N CFT150-2-3N CFT150-1-4N CFT200-2-2N CFT200-1-3N CFT200 2-3N CFT200-1-4N CFT200-2-4N CABLE SIZE 4/0 Str 300 MCM 300 MCM 500 MCM 500 MCM 500 MCM 750 MCM 750 MCM 750 MCM 1000 MCM 1000 MCM 1000 MCM 1000 MCM 1000 MCM 1500 MCM 1500 MCM 1500 MCM 1500 MCM 1500 MCM 2000 MCM 2000 MCM 2000 MCM 2000 MCM 2000 MCM 5/8 A FIG. 2 FIGURE NUMBER 1 1 1 1 2 1 1 2 1 1 2 1 2 1 1 2 1 2 1 2 1 2 1 2 DIMENSIONS IN INCHES A L 2 5 7/16 2 5 1/2 3 5 1/2 2 5 11/16 2 5 11/16 3 5 11/16 2 6 1/8 2 6 1/8 3 6 1/8 2 6 9/16 2 6 9/16 3 6 9/16 3 6 9/16 4 6 9/16 2 6 7/8 2 6 7/8 3 6 7/8 3 6 7/8 4 6 7/8 2 7 3 7 3 7 4 7 4 7 www.AFLglobal.com or 800-890-8878 Bronze Terminals, Taps 5/8 BOLT SIZE 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 © 2011, AFL, all rights reserved. 3.10.11 Specifications are subject to change without notice. 179
© Copyright 2024 Paperzz