Agricultural Products
Cattle Slats
www.croomconcrete.co.uk
Email: [email protected] www.croomconcrete.ie
96 Godolphin Road, Shepherds Bush, London W12. Tel: +44 (0)758 625 9872 Email: [email protected]
Off Church Road, Croom, Co. Limerick, Ireland. Tel: +353 (0)61 397479 Fax: +353 (0)61 600719
TYPICAL DIMENSION AND PERFORMANCE OF SLATS
SLAT
TYPE
RIBS
SLOT SIZE
SLAT DEPTH
AXIE LOADING
8’6” (2590mm)
Jumbo
6
38mm
175mm
8 Tonne
10’6” (3200mm)
Jumbo
6
40mm
200mm
8 Tonne
11’6” (3504mm)
Jumbo
6
38mm
200mm
8 Tonne
12’6” (3809mm)
Standard
6 to 7
40/38mm
175mm
8 Tonne
12’6” (3809mm)
Jumbo
6 to 7
40/38mm
200mm
10 Tonne
14’6” (4418mm)
Jumbo
6
40mm
200mm
10 Tonne
16’6” (5029mm)
Jumbo
6
40mm
225mm
10 Tonne
Croom Concrete slats are manufactured using only the highest quality
materials available to ensure ultimate strength and endurance. They are
designed to meet the needs of dairy and beef farming. The slat sizes can be
customised to cater for sheep and pig farming, all in accordance with British
and European standards.
Benefits of Croom Slats:
Designed to BS8110 (EN2 1992. Eurocode 2)
Dry Cast Manufacture
Galv Manhole Cast-in for safety
Superior 50Kn High Strength Concrete compared to the 40Kn standard
Suspended Floor System up to 17 feet
Slats are designed to provide optimum space to surface ratio
50mm concrete cover to reinforcing steel means no corrosion and a long
life span.
¡ High quality finish giving smooth tapered sides and level non-slip surface
for greater cattle comfort.
¡
¡
¡
¡
¡
¡
¡
www.croomconcrete.co.uk | www.croomconcrete.ie
Job Title: Cattle Slat Unit Spec [16’ 6”]
Drawing No: 1001/S/16-6
Cross Section A-A
1280mm [4’-2”]
STEEL
REINFORCEMENT
225mm [9”]
NOTE
1. Do not scale, use figured dimensions only.
2. All dimensions in metric and imperial units.
3. Slat are design accordance floor slats for
livestock I.S EN 12737:2004+A1:2007.
4. Minimum contact length of slat on wall
100mm.
B
5. Designed in accordance to BS8110 and
EC2 1992 ( Eurocode 2).
6. Minimum slat bearing over wall 150mm.
Plan view
5035mm [16’-6”]
A
7. Concrete grade to be C45 U.N.O.
8. All concrete is 45Kn high strength concrete.
9. Minimum 40 mm cover to all steel.
10. All steel to be S275 J0 to BS EN 10025.
11. M25 main reinforcement bar on bottom
section.
12. M12 reinforcement bar use on top section and
links.
1280mm [4’-2”]
13. All setting out and dimensions to be checked
on site.
14. Installation and maintainance should follow
best practice.
A
40mm~ ±4 [2”]
Detail B
SUMMARY
Name: 16’ 6” slat
Slat type: Agriculture slat unit
225mm [9”]
114mm [4”]
Dimension; 5035 x 1270 x 225mm
B
www.croomconcrete.co.uk | www.croomconcrete.ie
Agricultural Products
Job Title: Cattle Slat Unit Spec [16’ 6”]
Drawing No: 1002/S/14-6
Cross Section A-A
1258mm [4’-1”]
165mm [6”]
STEEL
REINFORCEMENT
225mm [9”]
114mm [5”]
B
NOTE
1. Do not scale, use figured dimensions only.
2. All dimensions in metric and imperial units.
3. Slat are design accordance floor slats for
livestock I.S EN 12737:2004+A1:2007.
4. Minimum contact length of slat on wall
100mm.
5. Designed in accordance to BS8110 and
EC2 1992 ( Eurocode 2).
6. Minimum slat bearing over wall 150mm.
Plan view
4420mm [14’-6”]
A
7. Concrete grade to be C45 U.N.O.
8. All concrete is 45Kn high strength concrete.
9. Minimum 40 mm cover to all steel.
10. All steel to be S275 J0 to BS EN 10025.
11. M25 main reinforcement bar on bottom
section.
12. M12 reinforcement bar use on top section and
links.
1258mm [4’-1”]
13. All setting out and dimensions to be checked
on site.
14. Installation and maintainance should follow
best practice.
A
SUMMARY
35mm~ ±4 [2”]
Detail B
Name: 14’ 6” slat
Slat type: Agriculture slat unit
Dimension; 4420 x 1258 x 225mm
225mm [9”]
102mm [4”]
www.croomconcrete.co.uk | www.croomconcrete.ie
Agricultural Products
Job Title: Cattle Slat Unit Spec [12’ 6”]
Drawing No: 1003/S/12-6
Cross Section A-A
1265mm [4’-2”]
STEEL
REINFORCEMENT
NOTE
1. Do not scale, use figured dimensions only.
2. All dimensions in metric and imperial units.
180mm [7”]
3. Slat are design accordance floor slats for
livestock I.S EN 12737:2004+A1:2007.
4. Minimum contact length of slat on wall
100mm.
5. Designed in accordance to BS8110 and
EC2 1992 ( Eurocode 2).
6. Minimum slat bearing over wall 150mm.
Plan view
A
7. Concrete grade to be C45 U.N.O.
3810mm [12’-6”]
8. All concrete is 45Kn high strength concrete.
9. Minimum 40 mm cover to all steel.
10. All steel to be S275 J0 to BS EN 10025.
11. M25 main reinforcement bar on bottom
section.
1265mm [4’-2”]
12. M12 reinforcement bar use on top section and
links.
13. All setting out and dimensions to be checked
on site.
14. Installation and maintainance should follow
best practice.
A
SUMMARY
35mm~ ±4 [2”]
Detail B
Name: 12’ 6” slat
Slat type: Agriculture slat unit
180mm [7”]
Dimension; 3810 x 1265 x 180mm
84mm [3”]
B
www.croomconcrete.co.uk | www.croomconcrete.ie
Agricultural Products
Job Title: Cattle Slat Unit Spec [12’ 6”]
Drawing No: 1004/S/12-6
Cross Section A-A
1265mm [4’-2”]
STEEL
REINFORCEMENT
195mm [8”]
NOTE
1. Do not scale, use figured dimensions only.
2. All dimensions in metric and imperial units.
3. Slat are design accordance floor slats for
livestock I.S EN 12737:2004+A1:2007.
4. Minimum contact length of slat on wall
100mm.
5. Designed in accordance to BS8110 and
EC2 1992 ( Eurocode 2).
B
6. Minimum slat bearing over wall 150mm.
Plan view
A
7. Concrete grade to be C45 U.N.O.
3810mm [12’-6”]
8. All concrete is 45Kn high strength concrete.
9. Minimum 40 mm cover to all steel.
10. All steel to be S275 J0 to BS EN 10025.
11. M25 main reinforcement bar on bottom
section.
1265mm [4’-2”]
12. M12 reinforcement bar use on top section and
links.
13. All setting out and dimensions to be checked
on site.
14. Installation and maintainance should follow
best practice.
A
SUMMARY
35mm~ ±4 [2”]
Detail B
Name: 12’ 6” slat
Slat type: Agriculture slat unit
195mm [8”]
Dimension; 3810 x 1265 x 195mm
89mm [4”]
B
www.croomconcrete.co.uk | www.croomconcrete.ie
Agricultural Products
Job Title: Cattle Slat Unit Spec [11’ 6”]
Drawing No: 1005/S/11-6
Cross Section A-A
STEEL
REINFORCEMENT
1207mm [3’-11”]
NOTE
1. Do not scale, use figured dimensions only.
200mm [8”]
3. Slat are design accordance floor slats for
livestock I.S EN 12737:2004+A1:2007.
4. Minimum contact length of slat on wall
100mm.
B
Plan view
2. All dimensions in metric and imperial units.
5. Designed in accordance to BS8110 and
EC2 1992 ( Eurocode 2).
A
6. Minimum slat bearing over wall 150mm.
3510mm [11’-6”]
7. Concrete grade to be C45 U.N.O.
8. All concrete is 45Kn high strength concrete.
9. Minimum 40 mm cover to all steel.
10. All steel to be S275 J0 to BS EN 10025.
1207mm [3’-11”]
11. M25 main reinforcement bar on bottom
section.
12. M12 reinforcement bar use on top section and
links.
13. All setting out and dimensions to be checked
on site.
A
14. Installation and maintainance should follow
best practice.
35mm~ ±4 [2”]
Detail B
200mm [8”]
102mm [4”]
SUMMARY
Name: 11’ 6” slat
Slat type: Agriculture slat unit
Dimension; 3510 x 1255 x 195mm
B
www.croomconcrete.co.uk | www.croomconcrete.ie
Agricultural Products
Job Title: Cattle Slat Unit Spec [10’ 6”]
Drawing No: 1007/S/10-6
Cross Section A-A
1255mm [4’-1”]
STEEL
REINFORCEMENT
NOTE
1. Do not scale, use figured dimensions only.
2. All dimensions in metric and imperial units.
200mm [8”]
3. Slat are design accordance floor slats for
livestock I.S EN 12737:2004+A1:2007.
4. Minimum contact length of slat on wall
100mm.
B
5. Designed in accordance to BS8110 and
EC2 1992 ( Eurocode 2).
6. Minimum slat bearing over wall 150mm.
Plan view
A
7. Concrete grade to be C45 U.N.O.
3200mm [10’-6”]
8. All concrete is 45Kn high strength concrete.
9. Minimum 40 mm cover to all steel.
10. All steel to be S275 J0 to BS EN 10025.
11. M25 main reinforcement bar on bottom
section.
1255mm [4’-1”]
12. M12 reinforcement bar use on top section and
links.
13. All setting out and dimensions to be checked
on site.
14. Installation and maintainance should follow
best practice.
A
40mm~ ±4 [2”]
Detail B
SUMMARY
Name: 10’ 6” slat
Slat type: Agriculture slat unit
200mm [8”]
Dimension; 3200 x 1255 x 200mm
109mm [4”]
B
www.croomconcrete.co.uk | www.croomconcrete.ie
Agricultural Products
Job Title: Cattle Slat Unit Spec [8’ 6”]
Drawing No: 1008/S/8-6
Cross Section A-A
1215mm [4’]
STEEL
REINFORCEMENT
175mm [7”]
NOTE
1. Do not scale, use figured dimensions only.
2. All dimensions in metric and imperial units.
3. Slat are design accordance floor slats for
livestock I.S EN 12737:2004+A1:2007.
4. Minimum contact length of slat on wall
100mm.
B
Plan view
5. Designed in accordance to BS8110 and
EC2 1992 ( Eurocode 2).
6. Minimum slat bearing over wall 150mm.
7. Concrete grade to be C45 U.N.O.
2591mm [8’-6”]
A
8. All concrete is 45Kn high strength concrete.
9. Minimum 40 mm cover to all steel.
10. All steel to be S275 J0 to BS EN 10025.
1215mm [4’]
11. M25 main reinforcement bar on bottom
section.
12. M12 reinforcement bar use on top section and
links.
13. All setting out and dimensions to be checked
on site.
14. Installation and maintainance should follow
best practice.
A
40mm~ ±4 [2”]
Detail B
SUMMARY
Name: 8’ 6” slat
Slat type: Agriculture slat unit
175mm [7”]
Dimension; 2591 x 1215 x 175mm
B
88mm [3”]
www.croomconcrete.co.uk | www.croomconcrete.ie
Agricultural Products