SEISMIC FRAME™
CABINET SYSTEM
C H AT S W O R T H
PRODUCTS, INC.
SEISMIC FRAME CABINET
Chatsworth, CA Operations
818-882-8595 • 818-718-0473 FAX
Georgetown, TX Operations
512-863-7800 • 512-869-1374 FAX
New Bern, NC Operations
252-514-2779 • 252-514-2977 FAX
New Castle, IN Operations
765-599-9000 • 765-593-0950 FAX
Email: [email protected]
Website: www.chatsworth.com
NEW C A T A L O G ITEM
ORGANIZING. STORING. SECURING.
SEISMIC FRAME CABINET
INTERIOR SIDE VIEW
FEATURES:
Standard 19" EIA Rack Width
Reinforced inner frame
provides structural rigidity
Compliant to stringent
specifications as defined by
Bellcore® GR-63-CORE Standard
for Zone 4 Earthquake
requirements
Certified to an 800 lb
distributed equipment load
Aluminum outer frame with
steel inner frame delivers
maximum strength with minimum
weight
SEISMIC FRAME™
CABINET SYSTEM
The award-winning MegaFrame Cabinet is now offered
in a seismic-rated cabinet solution. Rated Zone 4
compliant to Bellcore GR-63-CORE for Network
Equipment Building Systems (NEBS), Section 4.4.1.1, the
Seismic Frame Cabinet System is able to withstand the
seismic stress of an 8.3 Richter scale earthquake.
Offered in a 19" w x 36" d x 84" h cabinet solution, the
aluminum outer frame provides the sound structural
environment necessary for sensitive Information
Technology (IT) hardware components. With MultiMount™ rails, the cabinet fulfills various rack-mounting
requirements.
The heart of the Seismic Frame Cabinet System is a
reinforced inner frame that provides increased
Seismic bracing kits and a full structural rigidity. The cabinet system is certified to an
line of structural enhancement
800 lb equipment load in a seismic environment.
products are available to support
a wide range of site-specific
structural requirements
Refer to the cabinet part numbers below.
CABINET PART NUMBERS
Refer to the frame part numbers below.
FRAME ONLY PART NUMBERS
Example Frame Part Number: 11974-202
The Seismic Frame Cabinet has built-in cable
management via an aluminum top panel with four edge Internal cable management
protected punch-out ports. Three inches of space
provides flexibility for wire routing
between the side panel and interior cabinet houses two
and fits on-site customization
vertical cabling ring sections which accommodate
interior cable management. In data centers using
Adjustable front to rear
vertical mounting rails allow use raised floor cable routing, the Seismic Frame’s open
as a standard 4-post cabinet or 2- base easily addresses the maintenance of cables for
channel rack
entry and exit while providing optimal top to bottom
ventilation for the interior cabinet. For maximum
Multi-Mount™ rails provide
thermal management, the cabinet features a vented
greater rack-mounting flexibility
plexiglass front door and a perforated metal rear door.
Ships fully assembled.
Please contact your authorized CPI Distributor or CPI
Customer Service Representative for more information
or go to www.chatsworth.com.
Note: (X) denotes finish color: 1=Gray, 2=White, 7=Black
Example Cabinet Part Number: 11972-102
©2001 Chatsworth Products, Inc. All rights reserved. MegaFrame is a registered trademark of Chatsworth Products, Inc. Form No. MKT-60020-039-GT. 04/01/37M
Note: The Seismic Frame Cabinet System can accommodate up to four vertical cabling ring sections if
requirements necessitate extensive cable management.
SEISMIC FRAME CABINET
SEISMIC FRAME CABINET SYSTEM
Certified Zone 4 compliant to
Bellcore GR-63-CORE stringent
requirements
Offered in a 19" w x 36" d x 84" h
cabinet
Open base allows cable entry, exit and
ventilation
Aluminum top panel with four edgeprotected punch-out ports provides
interior cabling access
800 lb load rating
'Quick release' attachment for front
and rear doors provides easy
assembly and equipment
installation. Door can be positioned
to open to right or left side
Seismic Frame Cabinet Includes:
Four Post Frame
4 Vertical Mounting Rails
2 Removable Side Panels (11972 only)
1 “Quick Release” Front Door
1 “Quick Release” Rear Door
1 Top Panel with 2 Louvered Vents & 4 Cable Access
Ports
1 Pair Vertical Cabling Ring Section
1 Bag of 25 each 12-24 Rack Channel Mounting Screws
& 16 each M-6 Mounting Screws and Cage Nuts
Cabinet & Frame Specifications:
Universal EIA Alternating Hole Pattern:
5/8"-5/8"-1/2"
Construction:
Manufactured from aluminum, custom designed for
maximum strength and functionality and steel inner
frame
Internal Equipment Distributed Load (without casters):
800 lb
Standard door options include
smoked plexiglass, solid aluminum,
ventilated plexiglass and perforated
metal
SEISMIC FRAME CABINET DIMENSIONS
Multi-Mount rails fulfill Compaq®
and Dell® server requirements
Attach 12" cable runway easily with
pre-drilled attachment holes
Inch markers on horizontal rails
ensure proper alignment of vertical
mounting rails
Fully adjustable side mounted
cabling ring sections provide
unsurpassed vertical cable
management without protruding
into usable space
Overall Width
Useable EIA Width
Overall Width
Frame Opening:
19” w Front Frame Horizontal Opening
Front Frame Vertical Opening
Overall Height Specifications (With Standard Rails)
Height (Without Casters or Feet)
84.13"
Usable Height
77.88”
Usable RMU
43
Depth Dimensions
36” Deep Cabinet (Frame Only With Doors)
Usable Depth (Slide)
36.00”
Outside Dimension (Frame Only)
38.12”
Depth (Cabinet Door Face to Face)
39.62”
Depth (Inside Door to Inside Door)
39.22”
Mounting Depth (Maximum) Rail to Rail 36.00”
Product Weight
19” w x 36” d x 84” h Cabinet
19” w x 36” d x 84” h Cabinet
(Without Side Panels)
Shipping Weight
Minimum
Maximum
36” Deep Cabinet (Frame Only Without Doors)
Mounting Depth (Maximum) Rail to Rail 36.00”
Horizontal slides provide support
for mounting rails and cabling ring
panel
Adjustable (front to rear) vertical
mounting rails allow use as a
standard 4-post cabinet or 2-post
channel rack.
Rack mounting rails with Universal
EIA 5/8"-5/8"-1/2" alternating hole
pattern
Optional fan kit provides 400 CFM of
airflow through cabinet
19" Standard EIA rack width
Solid aluminum side panels are removable
2
Door
Styles:
Perforated
Metal
Door
Vented
Plexiglass
Door
3
19.00”
27.32”
20.20”
79.90”
331 lb
289 lb
286 lb
376 lb
Solid
Plexiglass
Door
Solid
Metal
Door
SEISMIC FRAME CABINET
SEISMIC FRAME CABINET SYSTEM
Certified Zone 4 compliant to
Bellcore GR-63-CORE stringent
requirements
Offered in a 19" w x 36" d x 84" h
cabinet
Open base allows cable entry, exit and
ventilation
Aluminum top panel with four edgeprotected punch-out ports provides
interior cabling access
800 lb load rating
'Quick release' attachment for front
and rear doors provides easy
assembly and equipment
installation. Door can be positioned
to open to right or left side
Seismic Frame Cabinet Includes:
Four Post Frame
4 Vertical Mounting Rails
2 Removable Side Panels (11972 only)
1 “Quick Release” Front Door
1 “Quick Release” Rear Door
1 Top Panel with 2 Louvered Vents & 4 Cable Access
Ports
1 Pair Vertical Cabling Ring Section
1 Bag of 25 each 12-24 Rack Channel Mounting Screws
& 16 each M-6 Mounting Screws and Cage Nuts
Cabinet & Frame Specifications:
Universal EIA Alternating Hole Pattern:
5/8"-5/8"-1/2"
Construction:
Manufactured from aluminum, custom designed for
maximum strength and functionality and steel inner
frame
Internal Equipment Distributed Load (without casters):
800 lb
Standard door options include
smoked plexiglass, solid aluminum,
ventilated plexiglass and perforated
metal
SEISMIC FRAME CABINET DIMENSIONS
Multi-Mount rails fulfill Compaq®
and Dell® server requirements
Attach 12" cable runway easily with
pre-drilled attachment holes
Inch markers on horizontal rails
ensure proper alignment of vertical
mounting rails
Fully adjustable side mounted
cabling ring sections provide
unsurpassed vertical cable
management without protruding
into usable space
Overall Width
Useable EIA Width
Overall Width
Frame Opening:
19” w Front Frame Horizontal Opening
Front Frame Vertical Opening
Overall Height Specifications (With Standard Rails)
Height (Without Casters or Feet)
84.13"
Usable Height
77.88”
Usable RMU
43
Depth Dimensions
36” Deep Cabinet (Frame Only With Doors)
Usable Depth (Slide)
36.00”
Outside Dimension (Frame Only)
38.12”
Depth (Cabinet Door Face to Face)
39.62”
Depth (Inside Door to Inside Door)
39.22”
Mounting Depth (Maximum) Rail to Rail 36.00”
Product Weight
19” w x 36” d x 84” h Cabinet
19” w x 36” d x 84” h Cabinet
(Without Side Panels)
Shipping Weight
Minimum
Maximum
36” Deep Cabinet (Frame Only Without Doors)
Mounting Depth (Maximum) Rail to Rail 36.00”
Horizontal slides provide support
for mounting rails and cabling ring
panel
Adjustable (front to rear) vertical
mounting rails allow use as a
standard 4-post cabinet or 2-post
channel rack.
Rack mounting rails with Universal
EIA 5/8"-5/8"-1/2" alternating hole
pattern
Optional fan kit provides 400 CFM of
airflow through cabinet
19" Standard EIA rack width
Solid aluminum side panels are removable
2
Door
Styles:
Perforated
Metal
Door
Vented
Plexiglass
Door
3
19.00”
27.32”
20.20”
79.90”
331 lb
289 lb
286 lb
376 lb
Solid
Plexiglass
Door
Solid
Metal
Door
SEISMIC FRAME™
CABINET SYSTEM
C H AT S W O R T H
PRODUCTS, INC.
SEISMIC FRAME CABINET
Chatsworth, CA Operations
818-882-8595 • 818-718-0473 FAX
Georgetown, TX Operations
512-863-7800 • 512-869-1374 FAX
New Bern, NC Operations
252-514-2779 • 252-514-2977 FAX
New Castle, IN Operations
765-599-9000 • 765-593-0950 FAX
Email: [email protected]
Website: www.chatsworth.com
NEW C A T A L O G ITEM
ORGANIZING. STORING. SECURING.
SEISMIC FRAME CABINET
INTERIOR SIDE VIEW
FEATURES:
Standard 19" EIA Rack Width
Reinforced inner frame
provides structural rigidity
Compliant to stringent
specifications as defined by
Bellcore® GR-63-CORE Standard
for Zone 4 Earthquake
requirements
Certified to an 800 lb
distributed equipment load
Aluminum outer frame with
steel inner frame delivers
maximum strength with minimum
weight
SEISMIC FRAME™
CABINET SYSTEM
The award-winning MegaFrame Cabinet is now offered
in a seismic-rated cabinet solution. Rated Zone 4
compliant to Bellcore GR-63-CORE for Network
Equipment Building Systems (NEBS), Section 4.4.1.1, the
Seismic Frame Cabinet System is able to withstand the
seismic stress of an 8.3 Richter scale earthquake.
Offered in a 19" w x 36" d x 84" h cabinet solution, the
aluminum outer frame provides the sound structural
environment necessary for sensitive Information
Technology (IT) hardware components. With MultiMount™ rails, the cabinet fulfills various rack-mounting
requirements.
The heart of the Seismic Frame Cabinet System is a
reinforced inner frame that provides increased
Seismic bracing kits and a full structural rigidity. The cabinet system is certified to an
line of structural enhancement
800 lb equipment load in a seismic environment.
products are available to support
a wide range of site-specific
structural requirements
Refer to the cabinet part numbers below.
CABINET PART NUMBERS
Refer to the frame part numbers below.
FRAME ONLY PART NUMBERS
Example Frame Part Number: 11974-202
The Seismic Frame Cabinet has built-in cable
management via an aluminum top panel with four edge Internal cable management
protected punch-out ports. Three inches of space
provides flexibility for wire routing
between the side panel and interior cabinet houses two
and fits on-site customization
vertical cabling ring sections which accommodate
interior cable management. In data centers using
Adjustable front to rear
vertical mounting rails allow use raised floor cable routing, the Seismic Frame’s open
as a standard 4-post cabinet or 2- base easily addresses the maintenance of cables for
channel rack
entry and exit while providing optimal top to bottom
ventilation for the interior cabinet. For maximum
Multi-Mount™ rails provide
thermal management, the cabinet features a vented
greater rack-mounting flexibility
plexiglass front door and a perforated metal rear door.
Ships fully assembled.
Please contact your authorized CPI Distributor or CPI
Customer Service Representative for more information
or go to www.chatsworth.com.
Note: (X) denotes finish color: 1=Gray, 2=White, 7=Black
Example Cabinet Part Number: 11972-102
©2001 Chatsworth Products, Inc. All rights reserved. MegaFrame is a registered trademark of Chatsworth Products, Inc. Form No. MKT-60020-039-GT. 04/01/37M
Note: The Seismic Frame Cabinet System can accommodate up to four vertical cabling ring sections if
requirements necessitate extensive cable management.