Slat
Conveyors
Slat Conveyors
Standard Specifications ................................................. 276
Heavy Duty Slat Conveyor ............................................. 277
Extra
- 275
-
(989) 358-7000
Heavy Duty Slat Conveyor ................................... 277
Slat Conveyor
Slat Conveyors are ideal for assembly line or production applications
where a flat carrying surface is desired. The slats are higher than
the sideframes allowing accessibility to load or
unload from both sides.
■ Rugged Welded Construction
■ Flat Conveying Surface
■ Accessible From Both Sides
■ Grooved Upper Track to Guide
Chain and Slats
Slat Conveyors
■ Abrasion/Impact Resistant Load
Track for Extended Track Life
■ Slats Are Easily Modified for
Fixture Attachment
Standard Specifications:
Conveyor Frame:
HDSC - 17 in. deep x 1/4 in. formed steel, welded and
painted construction.
XHDSC - 5 in. x 6.7 lb. channel uprights with structural
angle support frame, welded and painted construction.
Slats - 5 3/4 in. wide x 7 ga. formed steel. 1/4 in. thick slats,
wood slats or slats with recessed bolt heads are also available.
Slats can be easily modified to accept your fixtures.
Slat Width:
HDSC - 6 in. through 60 in. slat width.
XHDSC - 12 in. through 120 in. slat width.
Chain - 6 in. pitch steel bushed roller chain, 4 in. pitch also
available.
HDSC - 2 in. diameter rollers, attachment bracket single
side (A2)
XHDSC - 2 in., 2 1/2 in. or 3 in. dia. rollers dependant
upon load required, attachment bracket both sides (K2).
Sprockets - 12 in. pitch diameter minimum, dependant upon
application.
Take-up - Screw type, provides 12 in. of chain take-up.
Designed to take up 2 links of chain, then remove and reset
take-up.
Track - Upper load tracks are of abrasion/impact resistant wear
material for extended track life.
Guide System - Upper guide tracks are grooved full length.
Internal cam roller style guides available.
Drive - Side mount or floor mount end drive, sealed worm gear
speed reducer with motor, 30 FPM, other speeds available up to
50 FPM dependant upon application.
Tail Guard - Available on request. Depending upon application.
See photo above.
- 276 -
(989) 358-7000
MODEL HDSC (Heavy Duty Slat Conveyor)
OVERALL LENGTH
7 1/16”
12 3/4” + 6”
TAKE-UP
FORMED STEEL
SIDE FRAME
TOP OF
SLAT
ACCESS
PANEL
BOTH SIDES
SIDE VIEW
OAW = SW + 7 1/4”
3/8”
SLAT WIDTH (SW)
3 1/4”
EFF. WIDTH = SW - 3 1/2”
17”
FRAME
CROSS SECTION
MODEL XHDSC (Extra Heavy Duty Slat Conveyor)
OVERALL LENGTH
9 1/2”
REMOVABLE SIDE GUARDS
14 3/16”
+ 6” TAKE-UP
18”
FRAME
TOP OF
SLAT
Slat Conveyors
SIDE VIEW
3/8”
OAW = SW + 5”
SLAT WIDTH (SW)
2 1/2”
EFF. WIDTH = SW - 10 1/4”
TOP OF SLAT
CROSS SECTION
- 277 -
(989) 358-7000
Slat Conveyors
- 278 -
(989) 358-7000