Fluting Jig
And
Index System
Howard Fluting Jig
and Index System
Specifica on
Suits lathes with spindle heights from 80mm to
310mm (3.25” to 12”)
Greater spindle height can be achieved by using a
base plate on the lathe bed.
A base plate or board is recommended for a lathe with
round bed bars.
Base boards made from 20mm MDF or scrap Kitchen
Work Tops are ideal.
Routers that are removable from their base with a
standard 43mm collar.
Reducer collars can be supplied to suit die grinders or
other tools with a parallel collar can be provided. The
Trend T3 has a 42mm collar so 0.5mm shim can be
supplied. The Trend T4 has a 43mm collar.
Base fi ed with plas c liner.
Router carrier can be adjusted along the length of the
base.
Height and length adjustment for guide bush.
Router not included.
£159.00 plus P&P
Index System
60 48 36 14 Hole pa ern
Clamping system for posi ve loca on
33mm Spindle Standard
1 x 8 Spindle Adaptor
1 1/2 x 6 and other sizes to order.
Fit Lathes with 5” (130mm) Spindle Height above bed.
£50.00 plus P&P
Index Disc Only £25.00 plus P&P
Paul Howard Woodturning
Paul Howard Woodturner
Web www.paulhowardwoodturner.co.uk
www.paulhowardwoodturning.co.uk
[email protected]
[email protected]
Mob/Cell +44 (0) 7966 188559
Business Tagline or Motto
Home +44 (0) 1621 815654
29 Newbridge Road
Tiptree
Essex
(UK) CO5 0HS
Tel: 555 555 5555
Index System Fitted to a
Small Lathe
Index System Fitted to a
Large Lathe
The Index System has a range of se ngs for large
and small Lathes.
Hole pa erns 60 48 36 14
Spindle sizes 33mm Standard (bore size 34mm)
Bushes can be supplied for 1 x 8 Spindles.
Other sizes can be supplied.
Clamping system to lock spindle without
Backlash.