Nikpol Pty Ltd
Head Office
Nikpol Pty Ltd
6-12 Fairchild Street
Heatherton VIC 3202
P.O. Box 559
Moorabbin VIC 3189
AUSTRALIA
T (03) 9551 3900
F (03) 9552 8888
[email protected]
EGGER JP F 0,3 (F****)
CORE PARTICLEBOARD WITH REDUCED
FORMALDEHYDE RELEASE FOR USE IN
HUMID CONDITIONS
Sydney
Unit 2, Bessemer Street
Blacktown NSW 2148
T (02) 9622 4341
F (02) 9676 4204
[email protected]
Brisbane
EN_EGGER SUPER E0_03/13
Subject to technical modifications and amendments. All decors shown are reproductions.
Due to the variables in the printing process, colours may vary slightly from the actual product.
35 Wentworth Place
Banyo QLD 4014
P.O. Box 284
Northgate QLD 4013
T (07) 3216 5877
F (07) 3216 5478
[email protected]
E0 ac
cordi
n
AS/N g to
Z
S
1859
.1:20
04
www.nikpol.com.au
www.egger.com
EGGER JP F 0,3 (F****) CORE BOARDS
FOR MELAMINE FACED BOARDS AND
WORKTOPS
FORMALDEHYDE-REDUCED
BOARDS – Like natural wood
BOARD TYPE ON AS/NZS 1859.1:2006 – CLASS MR
Mechanical properties
Board mean values
Value based on AS/NZS 1859.1:2006
[mm]
class MR
Value*³
EGGER particleboard is made using environmentally friendly methods from wood residues
(65 to 90 % softwood) from the sawmill industry and forestry as well as from recycled
high-quality wood. The outstanding quality of EGGER particleboard, first produced in 1961
at the St. Johann plant in Austria, has been the key to the continued development of the
EGGER group.
EGGER JP F 0,3 (F****) BOARD is a chipboard with formaldehyde release on the lowest
possible technica level – like natural wood. In combination with moisture resistance the
particleboard meets the requirements for use in humid interior conditions and interior
fitments in humid areas (e.g. bathroom, work surface) which follows the Australian
standard AS/NZS 1859.1:2004 – class MR.
Characteristics
Unit
Formaldehyde-reduced furniture chipboard
Moisture-resistant based on AS/NZS 1859.1:2004
High strength middle layer
Low swell values
High surface delamination resistance
Technical values: higher than the required standards
Extremely low sand content (tool service lives)
Can be processed cleanly without chipping
More than 70 expressive decors available
Board thickness
[mm]
> 8-12
Density
[kg/m3]
Plant specific
> 12-22
> 22-33
> 33
Internal Bond strength
[N/mm2]
0,35
0,30
0,25
0,20
Bending strength transverse
[N/mm2]
Modulus of elasticity
[N/mm2]
13
13
10
9
Surface soundness
[N/mm2]
0,9
0,9
0,9
0,9
Swelling in thickness 24 h
[%]
< 18
< 15
<12
<12
Screw holding strength (surface)
[N]
–
Moisture content *1
[%]
5-13
Formaldehyde content *2
[class]
F**** (0,3 mg/L)
General Tolerances
Unit
Board thickness
[mm]
8 - 38
Length and width tolerance EN 324
[mm]
± 5,0
Squareness EN 324
[mm/m]
≤ 2,0
Edge straightness tolerance EN 324
[mm/m]
≤ 1,5
Thickness tolerance EN 324 (Sanded boards)
[mm]
± 0,3
Tolerance on the mean density
within a board EN 323
[%]
± 10
Building physical properties
Unit
[mm]
> 8 – 38
Board thickness
Fire behaviour category
Board thickness ≥ 9 mm and
density ≥ 600 kg/m³ in line with EN 13986;
Board thickness < 9 mm in line with EN 13986
D-s2, d0
E
Water vapour diffusion resistance value
µ moist
15
20
Mean density 600 kg/m3
Mean density 900 kg/m3
µ dry
50
50
Thermal conductivity EN 13986
Mean density 600 kg/m3
Mean density 900 kg/m3
W/(m*K)
0,12
0,18
Air sound insulation EN 13986
R = 13 x lg(m A) + 14
(m A = board surface weight kg/m2)
EN 13986
EGGER responds to the trend of Green Building and goes one step ahead offering this innovative board with a reduced
formaldehyde release in combination with a moisture resistant core board. EGGER omits the green dye in the core layer to
create an even more natural chipboard.
* PEFC (Programme for the Endorsement of Forest Certification Schemes) and / or FSC (Forest Stewardship Council)
Frequency range
250 Hz to 500 Hz
1000 Hz to 2000 Hz
0,10
0,25
Biological durability EN 13986
Protecting the environment begins with sustainable forestry
Sustainable forestry is a top priority for EGGER. For the
production of wood-based materials, EGGER only uses wood
from forest thinnings and residual wood in selected quality
from sawmills, as well as suitable recycled wood. Within the
chain of custody, our plants are PEFC* and / or FSC*-certified
depending on the availability of wood.
Sound absorption EN 13986
EN 335-3
Hazard category 1
(no earth contact, dry 20°/65 % relative humidity)
PCP content EN 13986
EN 13986
[ppm]
< 5
PEFC/04-31-0552
Promoting Sustainable
Forest Management
www.pefc.org
*1 On delivery
*2 Formaldehyde content:
EGGER particleboard EUROSPAN® JP F 0,3 (F****) achieves the formaldehyde class F**** according to the Japanese standard JIS A 5908:2003.
The limit value is 0,3 mg/L according to Japanese test method JIS A 1460 (Desiccator) and
according to Australia standard AS/NZS 1859.1/Amdt 1/2006-02-03 table 1 (Desiccator test method).
Additionally EGGER particleboard EUROSPAN® JP F 0,3 (F****) reaches limit value 3,0 mg/100 over-dry board at moisture content of 6,5 %,
according to the European test Method EN 120 (Perforator).