Quickie®
Product Presentation
Basics Portfolio
Agenda
1. Value Proposition
2. Solution Overview
3. Products Overview
4. Product Specifications
5. Features & Benefits
6. Part Numbers
7. Markets & Applications
8. Marcomm Collaterals
Product Presentation – Quickie®
2
Quickie®
Value Proposition
Quickie® is the right and complete solution for cable to board connectors in
2.54mm pitch.
Thanks to the plating performances guaranteed with 100 mating cycles as min
is the right solution/alternative for flat cable-to-board connection.
The Header with the four walled shielding is protects pins in unmated condition
and prevents misalignment, thanks to the dual polarization it protects against
mis match and the Duplex plating increase the cost effectiveness.
The IDC Receptacles thanks to the Pre-Loaded adjustable bridge-type cover. It
reduces assembly time, protects contacts and offers precise cover-to-base
alignment ensuring an reliable termination.
Product Presentation – Quickie®
3
Quickie®
Solution Overview
IDC
Receptacles
IDC PCB
Connector
Shrouded
Eject Latch
Headers
Shrouded Low Profile
Headers
(4 walls)
Product Presentation – Quickie®
4
Quickie®
Products Overview
Products
Design
Version
Quickie Header
Shrouded
Low Profile
(4 Walls)
Straight and Right
Angle, TMT or PIP
Shrouded
Eject Latch
Straight and Right
Angle TMT or SMT
Quickie IDC Reptacles
Picture
With or
without Strain
Relief
Latching
Strain Relief
Product Presentation – Quickie®
5
Quickie®
Solution Overview
Product Facts
Specifications
 Cable to board conectors with 2.54mm
centerline
 Dual row 6 – 64 pos
 Four walled shielding protects pins unmated
condition and prevents misalignment
 Long wiping action ensures good contact
 Unique lock and eject system minimizing
space required and allowing dense packaging
design
 According to european spec DIN 41651,
HE10 and BT D2632





Performance Characteristics
 Current rating : up to 3A
 Insulation resistance : 1000 M
ohm min
 Voltage rating 1000V
 Durability 100 cycles
 OT° Range : -65° to 105°

Pitch
Pin Count Dual row
Mating direction
Current rate/contact
Material (Cable Receptacle)
 Housing
 Terminal
Material (header)
 Housing
 Terminal
2.54mm
6-64 pos
Vertical & right angle
Header 3A. Receptacle 1A
Thermoplastic UL94V-0
Phosphor Bronze / Brass Alloy
Thermoplastic UL94V-0
Phosphor Bronze / Brass Alloy
Technical Documents
Product spec : BUS 12-082
BUS 12-095
Tool Information
 Manual flat cable cutter : HT209
 Quickie assembly hand tool : HT 210
Product Presentation – Quickie®
6
Quickie®
Features & Benefits - Header
Features
Four-walled shielding
Dual polarization by use of polarizations keys
Side window
Duplex plating
According to DIN 41651 specification, HE10
and BT D2632
Product Presentation – Quickie®
Benefits
It protects pins in unmated condition and
prevents misalignment
It protects against mis match
It enables unique locking through latching
system
Cost efficient
Qualified products well-known on the market
7
Quickie®
Features & Benefits - Header
Features
Benefits
Four-walled shielding
It protects pins in unmated condition and
prevents misalignment
Dual polarization by use of polarizations keys
It protects against mismatch
Unique lock and eject system
It minimizes PCB space required and allowing
dense packaging design
Duplex plating
According to DIN 41651 specification, HE10
and BT D2632
Product Presentation – Quickie®
Cost efficient
Qualified products well-known on the market
8
Quickie®
Features & Benefits – IDC Receptacles
Features
Pre-Loaded adjustable bridge-type cover
Long wiping action
Comprehensive range of connector sizes
Duplex plating
According to DIN 41651 specification, HE10
and BT D2632
Product Presentation – Quickie®
Benefits
It reduces assembly time, protects contacts
and offers precise cover-to-base alignment
ensuring an reliable termination
It ensures good contact
It suits a wide range of cables
Cost efficient
Qualified products well-known on the market
9
Quickie®
Part Numbers
Products
Header Shrouded Low
Profile
(4 Walls)
Header Shrouded Eject
Latch
IDC Receptacles
IDC PCB Connector
Product Presentation – Quickie®
Version
Part Number
Straight TMT
75869
Straight SMT
52601
Right Angle
75867
Straight
71918
Right Angle
71922
With Strain Relief
71600
Without Strain Relief
71600
Latching Strain Relief
71600
69830
10
Quickie®
Main Markets & Applications
Industrial, Instrumentation & Medical
Consumer market
Product Presentation – Quickie®
Communications market
Data market
11
Quickie®
Marcomm Collaterals
Available on FCI.com
 Brochure
 Technical Data Sheet
Product Presentation – Quickie®
12
Quickie®
Marcomm Collaterals
Available on FCI.com
 Product Specification
 Part Numbers and Drawings
Product Presentation – Quickie®
13
THANK YOU