NH3 HF HCl H O
2
CO2
O2+ temperature CH
4
H2S
CO
LD 500
Laser Diode Gas Analyser
The Opsis LD 500 Analyser is the central unit in the
laser diode gas monitoring system. It can house up
to four laser diode heads. Each head is a complete
laser control and data sampling system. A built-in
PC with LCD display controls the function of the
instrument.
The LD 500 will emit light from the internal
laser diode to an emitter via a fibre optic cable. A
receiver converts the signal and sends it back via a
second fibre optic communication cable to the LD
500 analyser. The LD 500 will process and evaluate
the signals and provide measurement results with
response times down to one second.
Please refer to page two for the gases that can be
measured. The specifications for each gas are presented in the respective application sheet.
The system can be configured according to the
system examples described on page four.
Altogether, the LD 500 analyser can measure on
up to eight paths.
P45
Technical Specifications (standard)
Dimensions (L × W × H) Weight incl. case (approx.) Voltage supply Power consumption Computer Hard disk memory Floppy disk drive Modem Serial output Ambient temperature Degree of protection 485 × 450 × 200 mm, 19" rack
15 kg
230 VAC (+6%, –10%) /
115 VAC (±10%) 50/60 Hz
110 W
PC compatible
2 Gb or more
31/2", 1,44 Mb
Hayes compatible
RS 232
+15°C to +25°C
(+60°F to +75°F)
IP 20
An LD 500 includes as standard
Central unit with LCD and >2 Gb hard disk
Floppy disk
PC and slots for four laser modules
Keyboard and built-in screen
Modem
2 × RS 232
Communication card CC 202L
Standard separately ordered
One laser head
One ER 060L / ER 080L / ER 110L / ER 150L emitter and receiver unit
or ER 120L / ER 130L and RR 090L transceiver and retro-reflector
One OF 011 / OF 010 / OF 005 laser optical fibre cable
One CF 120 optical communication fibre
Gas calibration EG 002 (one for each gas)
LA 060 / LA 110 / LA 150 light adjustment kit for the different
emitter/receiver heads
Multiplexer/Demultiplexer MX XXXL
Laser Optical Fibre
Laser Heads
OF 010-xxx
OF 005-xxx
OF 011-xxx
LH 511
LH 512
LH 513
LH 514
LH 515
LH 516
Laser fibre for modules LH 511, LH 513 and LH 514
Laser fibre for module LH 515
Laser fibre for modules LH 512 and LH 516
HF/H2O laser module
HCl/H2O laser module
NH3/H2O laser module
CO/CO2/H2S laser module
O2/Temperature laser module
CH4/H2O laser module
-xxx = number of metres
Options
Additional laser heads (up to 4)
Additional monitoring paths (up to 8)
Additional serial ports
Additional communication card CC 202L
External screen
Accessories
Temperature controlled cabinet AC 080
Auto-calibration equipment
MX 10XL Multiplexer*
MX X01L Demultiplexer*
I/O Management software IO 256
Digital and analogue input and output modules
Short-haul modems
Sensors
Dataloggers
EnviMan Software
* Please specify the number of inputs/outputs and type of laser(s)
Specifications subject to change without notice
Light adjustment LA 060
Example of an emitter and
receiver unit – ER 060L
Communication cable CF 120
System Overview of an AQM Example
Emitter
Receiver
Power
supply
Emitter
Receiver
Power
supply
Retro-reflector
Emitter / Receiver
Climate controlled shelter
Power
supply
Multiplexer
LD500 Laser diode gas analyser
System Overview of a CEM Example
Emitter
Receiver
Emitter
Receiver
Power
supply
Power
supply
Climate controlled shelter
Multiplexer
LD500 Laser diode gas analyser
System Configurations – 3 Examples
One laser module for two paths
Laser module
Emitter
Receiver
Emitter
Receiver
Emitter
Receiver
Demultiplexer
Emitter
Receiver
Demultiplexer
Emitter
Receiver
Demultiplexer
Emitter
Receiver
Multiplexer
Communication card
LD 500
Two laser modules for one path
Laser module
Demultiplexer
Laser module
2 × Communication card
LD 500
Two laser modules for three paths
Laser module
Multiplexer
Laser module
Multiplexer
2 × Communication card
LD 500
P45 2001 11
INDUSTRIE AUTOMATION GRAZ
Box 244
SE-244 02 Furulund, Sweden
Telephone Int +46 46 72 25 00
Telefax Int +46 46 72 25 01
E-mail [email protected]
URL http://www.opsis.se
Opsis AB / Tempte & Tempte / Odenprint
Autaler Strasse 55,AT-8074 Raaba
Telefon:
+43 (316) 405 105
Telefax: +43 (316) 405 105 22
E-Mail:
[email protected]
www.iag.co.at
Internet: