MANUAL – INSTALLATION + SERVICE
Full Round 360° Duct Hung
Displacement Diffuser
DR360-DH Series
Revision #: 01 – Issue Date: 03/25/14
© 2014 Price Industries Limited. All rights reserved.
FULL ROUND 360° DUCT HUNG DISPLACEMENT DIFFUSER
INSTALLATION INSTRUCTIONS
1. Locate and mark location of tabs that are fastened directly
to the support rods.
2. Locate diffuser
onto&end
oflocation
duct section.
1) Locate
mark
of tabs that are fastented directly to
the support rods.
3. Secure duct onto diffuser with self drilling screws or drill
pilot hole using
regular
sheetmetal
2) Locate
diffuser
onto endscrews
of duct (supplied
section. by
others) at each of the tabs previously located in step 1.
B
3) Secure duct onto diffuser with self drilling screws or drill pilot
4. Add at least 4hole
extra
at various
pointsscrews
around
andscrews
use regular
sheetmetal
(supplied by others)
diffuser collaratinto
duct.
each
of the tabs previously located in step 1.
5. Secure diffuser
structure
foratextra
support
4) Addtoatbuilding
least 4 extra
screws
various
points(by
around diffuser
others) as required
by local
collar into
duct. code.
5) Secure diffuser to building structure for extra support (by
others) as required by local code.
DUCT PROVIDED
BY OTHERS
DUCT SUPPLIED
BY OTHERS
A
INLET NECK
INLET NECK
DUCT
SUPPLIED
BY OTHERS
REINFORCEMENT
TAB
REINFORCEMENT TAB
Detail B
SCREW SUPPLIED
BY OTHERS
Section A-A
SCREW SUPPLIED
BY OTHERS
DISPLACEMENT
DIFFUSER
1
FULL ROUND 360° DUCT HUNG DISPLACEMENT DIFFUSER - Manual | priceindustries.com
READ
ALL INSTRUCTIONS BEFORE INSTALL
A
FULL ROUND 360° DUCT HUNG DISPLACEMENT DIFFUSER
NOTES
priceindustries.com | FULL ROUND 360° DUCT HUNG DISPLACEMENT DIFFUSER - Manual
2
This document contains the most current product information as of this printing.
For the most up-to-date product information, please go to priceindustries.com.
© 2014 Price Industries Limited. All rights reserved.