K S U LT I M AT E S T EP BY S T EP
P R EPA R AT I O N
A P P L I C AT I O N
RINSING
Shampoo twice with PreTreatment Cleanser. For very
curly and resistant hair types leave
2nd shampoo on for 5 minutes
(and cover with a plastic cap)
before rinsing.
KS Ultimate is applied in 2 - 3cm
sections, close to the root, but
not onto the root. DO NOT APPLY
ONTO THE SKIN.
Rinse for 10 - 20 seconds, do not
shampoo (rinse white and very
blonde hair for an extra minute).
Apply Pre-Treatment Spray Plus
in sections onto towel dried hair
and comb through. Concentrate on
the most porous areas.
Ensure all hair is kept damp during
the treatment by covering with a
plastic cap.
Leave for 30 - 45 minutes. Check
hair is still hydrated after 20-30
minutes.
Gently squeeze moisture out.
Apply Moisture Lock, comb
through and leave for 2 minutes.
Rinse for 20 - 30 seconds.
DRYING &
IRONING
1S T W A S H /
FINAL STEPS
Blow dry hair 100% (brushes may
be used).
Hair can be shampooed after just
30 minutes, although most clients
will prefer to leave and shampoo
themselves at home.
Iron hair slowly in 2 - 3cm sections
using the EasyComb. For a perfect
first pass, iron the hair from roots
to ends in one smooth motion and
leave to cool for 2 seconds.
Continue ironing using the
recommended heat setting and
number of passes.
Ends will often need less passes.
XTRA
After APPLICATION and BEFORE RINSING, Xtra is an optional extra step for more resistant hair, which
delivers greater straightening power. Turn the page for the full details.
For an ultimate final finish, iron the
hair once at 180°C / 355°F in large
sections.
H E L P. K E R A S T R A I G H T . C O M
Hair MUST be rinsed for 3 - 5
minutes before first shampoo.
Moisture & Volume
Enhance Shampoo and
Conditioner should always
be used as they are Sodium
Chloride free and contain
KS Complex to maximise
the benefits and longevity.
A P P L I C AT I O N
XTRA STEP
XTRA is an optional extra step for more resistant hair, which
delivers greater straightening power.
Use the XTRA process for specific areas or on the full head of
hair.
We don’t recommend the XTRA process for weak, fragile hair.
The treatment is dried in, using the fast drying technique, after
the sink-in time and before the rinsing stage.
FAST DRYING TECHNIQUE
Blast dry the hair with medium heat until it’s 70% dry.
Beginning at the nape, brush the hair through with a paddle
brush without heat, to redistribute the treatment and keep
the hair soft and tangle free.
Blast dry the next 20% before paddle brushing through
again.
Dry the final 10% in sections with both heat and brush.
Keep your KeraStraight
treatments always at their
best with monthly Intense
Boost treatments
Do not iron at this point. Continue to rinsing stage.
TR010 KS Ultimate Step by Step
RINSING