KLIMATEC 160 Suited for passive houses 3 circumferential airtight sealing levels 48 cm 48 cm high hatch casing ball bearing supported rail system; fully adjustable to any ceiling height thermally separated frame final step inside the hatch casing for comfortable usability Also le availab min with 30 ol tr fire con EI ²30! telescopic handrail for safe handling Certified for arctic mponent House Co Passive until 31.12.2016 valid climate, & Co.KG ircase Ges.m.b.H Attic sta Wipplinger ach, AUSTRIA WIPPRO enb rderweiss 4191 Vo 160 C KLIMATE Category: rer: Manufactu name: Product Wide steps with anti-slip nubs itute House Inst Passive ng Feist Dr. Wolfga mstadt 64283 Dar Y GERMAN ed based s aw ard tificate wa teria: This cer lowing cri in: on the fol 0 m results A given com ponent size of 1.40 m by 0.7 W/(m²K) = 0.34 0.60 ≤ ation of the RepresentHouse Attic PassiveStairs W/(m²K) ponent t, the com into accoun situations installation Taking the criterion. following (m²K) meets the 0.60 W/ UD ≤ UD,installed iene: nts of hyg requireme Functional ≥ the l map of IsothermaHouse Attic Passive irs Sta l map Isotherma concrete in installation ing ceil 0.80 fRsi = 0,25 m²K/W )] Ψ [W/(mK fficients bridge coe thermal ConcreteFollowing ined: beam ceiling Woodenn determ g have bee ceilin brid Thermal )] Ψ [W/(mK UD,ins ient ge coeffic 0.04 0.52 0.08 0.70 eiling Concrete-c with frame l map Isotherma woodenin installation ing beam ceil 0.05 0.57 [W/(m²K)] talled of insulation p door with et metal. 3 erial. Tra she posite mat ) and coating of of den com insulation 5 W/(mk) rs of woo sorrounding ates requires (λ = 0.03 Attic stai TPE) and polystyrene arctic clim (EPDM, extruded -sealing allation in ess Inst ). ghtn mk) 5 W/( level airti l (λ = 0.03 crete-ceilings. con mineral woo frame for taining all installation report con a detailed turer for the manufac Please ask and results. 0836as01 ions calculat Description safety-caps at the bottom of the stair smoothly operating, spring-mounted closing mechanism .com ivehouse www.pass The Klimatec 160 is more than just a functional attic Klimatec 160 fulfills the passive house requirements staircase: It´s a certified low-energy and passive significantly and scores a value of 0.34 W/m2K (inspectionSupply dimension 1.4 x 0.7m) in the verification prohouse component, which 475 ensures thePerformance most rational Building High at the German Passivhaus Institute. use of heating energy [email protected] in cold climates. |cedure 800-995-6329 It´s essential to keep the thermal bridge losses to a To reach this incomparable value Wippro created a minimum, especially at the high sensitive connection special thermally separated frame and an insulated between the living area and the attic. Either moun- trap door with 16 cm extruded polystyrene. The sys- l map Isotherma concrete in installation installation ceiling with e fram 2 4 W/m 3 , 0 U = fication veri K ling levels. The Austrian leading company has therefore once again implemented an in-house innovation success into the market. 1 The high-grade attic staircase Klimatec 160, as all other Wippro products, has been developed for generations and fulfills an optimum of comfort, Klimatec 160 (27.5×55”) PHI Certified Attic Staircase Hatch The WIPPRO Klimatec 160 is a high quality, super-insulated attic hatch with a folding stair for accessing un-insulated attics in high performance projects and Passive Houses. This wellengineered solution is very light to operate, can be pulled down and unfolded with one hand with minimal force. This allows you to access you unconditioned attic space and not have to compromise your thermal envelope. It exceeds the PHI required Ud of 0.60w/m2K by almost 45% and has a comfortably high f(rsi) above 0.8. For thermal bridge Ψ values, please see PHI certificate or contact 475 High Performance Building Supply to assist with a calculation. To reach this unmatched U-value WIPPRO created a special, thermally separated frame and an insulated hatch door with 6.3” Extruded polystyrene. The system airseal is made with 3 circumferential airsealing gaskets – which assures long term durability and performance of this critical component. Insulation value can be further enhanced with ISOTEC 160 lid, that automatically lifts when stair hatch is opened – 2-3/8” – R-9.7 Specs • Klimatec 160 – rough opening 55-1/8” x 27-9/16” (140 x 70 cm) • Staircase length / from 8’2.5” to 9’10.5” (250 to 270 cm) • Ud 0.059 BTU/hr.ft2.°F (0.34 W/m2K) • External frame size inside opening 53-13/16” x 26-1/8” (136.7×66.4 cm) • Metal frame size 55-1/8” x 27-9/16” (138 x 68 cm) • White ceiling frame dimensions 56-13/16” by 29-1/8” (144.3 x 74.0cm) • Height 18.9” (48cm) • Highest EU airsealing class (IV) – active latch closure The WIPPRO products stand out compared to wooden attic stairs because of the following unique features that assure long lasting performance and ease of use: • 2 heavy duty spring mounted closing/opening mechanisms, with ball bearings • Metal stair – that fully adjusts to ceiling heights and protective caps on bottom • Powered coated stair with anti-slip treads (14.2” wide, 4.8” high rungs) • Telescopic handle on side for safe ascending/decending stair/ladder • Final step inside hatch, make all steps height the same even within the 18.9” hatch structure Motorized custom made attic hatches are available with highly insulative properties – please contact 475 High Performance Building Supply to request a quote. 475 High Performance Building Supply [email protected] | 800-995-6329 2
© Copyright 2024 Paperzz