Assembly Instructions:
Axxonn 32" Malaga Square Tile Top Fire Pit/Coffee Table
Item # FT626PEITELID32
Part List
Part
List
Description
Qty.
A
Mantle Frame
1
8-07-00198-01-098
B
Leg
4
8-01-00112-01-098
C
Leg Support
1
8-07-00199-01-098
D
Lid Frame
1
8-07-00163-01-098
E
Square Bowl
1
8-09-00039-01-055
F
Log Grate
1
8-14-00036-01-055
G
Mesh Lid
1
8-21-00041-01-055
H
Square Tile Piece (9.4 x
9.4 inch)
4
3-19-00026-09-000
I
Rectangular Tile
Piece(9.8 x 4.5 inch)
8
3-19-00034-09-000
J
Square Tile Piece(4.5 x
4.5 inch)
4
3-19-00035-09-000
K
Handle
1
8-08-00017-01-098
L
Lid Ring
1
1-20-00001-01-055
Drawings
Part #
M
Bolt（M6 x12mm）
12
1-06-06012-32-000
N
Nut（M6）
2
1-27-00006-32-000
O
Poker
1
3-06-00013-47-055
P
Allen Wrench
1
3-06-00009-01-000
4
1-04-00025-07-055
Q
Plastic pad
(Pre-installed)
Tool required: Allen Wrench (provided)
Special Warnings
 This fire pit is intended for Outdoor Use Only! DO NOT use on wooden or
composite decks.
 Fire pit must be placed on a non-combustible surface.
 This fire pit is intended to Burn Wood Logs Only! DO NOT burn coal, leaves
or other combustible materials in the fire pit.
 NOT for use by children. Keep children and pets away from the fire pit.
 Fire pit is hot, use with caution. NEVER touch hot fire pit with bare hands.
 NEVER leave burning fire pit unattended and always extinguish fire
completely before leaving the fire pit.
 Maintain a minimum of 10 FT from any structure!
 DO NOT use near flammable or combustible objects or materials.
 Use on a temperature safe surface.
 LOG GRATE is NOT intended for cooking and SHOULD NOT be used for
this purpose.
 DO NOT move fire pit when in use
 DO NOT store or use gasoline or other flammable liquids or vapors in the
vicinity of this fire pit
 Do NOT use in windy conditions
Operation Instructions
 Place wood logs on grate and light with match. DO NOT overload logs.
 Please use Poker (provided) when handling.
 We do not recommend pouring water over the fire unless necessary. The fire
should be allowed to expire on its own.
 Ceramic Tiles, Slate and Granite are fragile so handle with care. (for items
with ceramic tiles, slate or granite)
Care and Maintenance
This fire pit is a quality-built product and is made to last for many years.
The frame structure of this unit is made of powder-coated steel extrusion and
should resist rusting under normal use. Should rusting occur, we suggest using a
steel brush on the affected area followed by a spray coating of high temperature
anti-rust paint.
For additional rust proofing of the bowl, grate and mesh lid we recommend
that a coat of high temperature primer (such as rustoleum or similar brand)
is applied before use.
You may cover the fire pit with a Protective Cover (NOT provided) when the fire
pit is not in use. Ensure the fire pit has completely cooled down before using the
Protective Cover.
Assembly Instructions
Estimated Assembly Time: 20 Minutes
DO NOT over tighten hardware!
Step 1, Attach the 4 Legs (B) to Mantle Frame (A) with Bolt (M). Finger tighten and do not fully
tighten the bolts. (View Fig. 1)
Step 2, Attach Leg Support (C) to Legs (B) by using Bolt (M). Finger tighten, do not fully tighten
the bolts. Then tighten all hardware with an Allen Wrench (P) (provided) until all pieces fit
together securely.(View Fig. 2)
Step 3, For use as a Coffee Table
Turn the assembled frame over so that it sits securely (legs down) on a flat surface.
Place Square Bowl (E) in the center of Mantel Frame (A) and put Log Grate (F) in to the
Square bowl (E).
Mount Handle (K) through the holes on the Lid Frame (D) and fasten nuts (N) to threads on
Handle (K) (MAKE SURE that the handle is mounted from the top), place the assembled Lid
Frame (D) over the square bowl (E). Place Square Tiles (H) onto the Lid Frame (D). Then
Place Rectangular Tiles (I) and Square Tiles (J) onto the assembled Top frame (A). (View Fig. 3)
Step 4, For use as a Fire Pit
Affix Lid Ring (L) to the Mesh Lid (G) by screwing the Lid Ring into the threaded upper hole on
the Mesh Lid. Place the Mesh Lid on the Square bowl (E).(View Fig. 4) (the Lid Frame (D) with
tiles may be placed underneath the bowl (E) on the Leg Support (C).)
Your
fire pit is ready for use.
For questions or warranty service DO
NOT RETURN,
Email or call Axxonn’s CUSTOMER SERVICE at [email protected]
Or 1-877-229-9666 between 8:00AM to 4:30PM Eastern Standard Time,
For Warranty Service we need you to Email us:
1.Proof of purchase, 2.Your name, address and phone number,
3.Defective part number, 4.Item number, 5.Picture if relevant.
Your request will be handled promptly.
PRINTED IN CHINA (161115)