46.35
HMI Sandbagging Equipment
The Latest Technology in Sandbagging Equipment
28.4
Model ASB-3
60.93
Model 300 - S
Model 100
Model 300
Sandbagging Equipment Dimensions (approx.)
MODEL
100
300
ASB-3
300-S
A
27”
27”
95”
27”
B
17”
49”
98.5”
49”
C
18.5”
45”
94”
46”
D
17”
17”
65”
17”
E
na
na
80”
NA
F
18.5”
27”
60”
29”
G
23”
27”
na
29”
WEIGHT
34#
90#
2200#
approx
90#
COATING
Powder
coat
Powder
coat
Paint
Powder
coat
Bags per Hour
100
225
1800
225
ASB-3 Automatic Sandbagging
? No More Sandbagging one bag at a time!
? 1800 Bags per hour capability
? Flood Control, Erosion Control, Fire Control, Barricades
P.O. Box 398, Escalon, Ca. 95320-0398
Telephone: 209-838-7323
Fax
209-838-1551
Web: www.hoganmfg.com
E-mail: [email protected]
HMI Sandbagging Equipment
Developed for
HMI Sandbagging Equipment
Features
??
??
??
??
??
??
??
??
1,800 Bags per hour capability
Bag wet or dry sand
Rotator Dispensing System
Patented “Hands Free” Sand Chute Design
Completely Self Contained
Easily Transportable
All Steel Construction
Made in the U.S.A.
Now 2 people can do the work of 10!
HMI SandbaggingEquipment
Model ASB3
Approximately 1800 bags per hour
Emergency Sandbagging Operations!
HMI Sandbagging Equipment allows for single or multiple operators.
The low profile Ergonomic design means faster Filling, less energy expenditure and Efficient use of man power.
?
?
?
?
?
?
?
?
?
?
Increase productivity by As much as 500%
Single or Multiple Person Operation
Patented chute design allows bags to be self supporting
Filled bags easily removed.
Fills all standard bags.
Operates with wet or dry sand.
HMI Sandbagging Equipment
Model 300
Approximately 225 bags per hour
Unique Rotator Dispensing System
? Rotator is designed with three, 120 degree offset metering cups. As the rotator assembly turns the metering cups
are filled and will independently dump the metered amount
of sand down one chute at a time, automatically filling the
bag. This design allows operation with a single person.
? Pre measured cup size can be adjusted for desired fill
amounts.
New Stackable Model 300-S
(Call for availability)
HMI Sandbagging Equipment
Optional Lifting Lugs
Optional Bag Storage Shelf
Patented Sand Chute Design
Model 100
Allows for hand free operation that does not require the operator to hold the bag in place while
being filled
Approximately 100 bags per hour
(Call for availability)
Optional Grating to catch debris
How it works… ..
With the chutes pointing away from the sand pile, one person slips the empty bags on to the chutes,
another person shovels or loads sand into the HMI Sandbagging Equipment when bags are full, they
automatically drop to the ground and are taken away while the process is repeated.
2.4 yard Sand Hopper
(approx. 137 bags of sand)
Rotator Dispensing System
Emergency Shut Off Switch
* Patented Hands Free Sand Chute
9000 RPM Hydraulic Vibrator Unit
Hydraulic Motor
Rotator Drive Assembly
Filled Bag Support Shelve
Forward and Reverse controls
5 HP Gas Motor
750 psi / 6.3 GPM Hyd. Pump
FULLY INSTALL BAG WITH
CORNER TIGHT TO TIP OF
CHUTE
3 TO 4 SHOVEL FULLS,
BAGS SHOULD ONLY BE
FILLED 1/2 WAY
(30 TO 40 POUNDS)
GRAB CORNER & PULL
OUTWARD. ONCE BAG
CLEARS CHUTE, STAND
BAG UP & REMOVE