HIGH DEFINITION DOME - Aerial View Systems

HIGH
DEFINITION
DOME
SPECIFICATIONS
August 13, 2013
Image Device
Effective Pixels
Video Signal
Video Output
Minimum Illumination
AUTO-B&W
Digital Noise Ratio
Zoom Lens
Field of View
Panning Range
Tilting Range
Speed
Presets
Auto Scan, Tour & Pattern
Control
On Screen Display
Alarm Output
Alarm Input
Environmental Enclosure
Power Requirement Camera
Power Requirement Heater
Weight
DO-160F
AVS860-Z-28PTZ
(Pan, Tilt & Zoom)
1/3” SONY Progressive CMOS
2.1 Mega Pixel
HD:
1920 x 1080 (Full HD, 1080p @ 30fps, 25fps)
1280 x 720 ( HD, 720p @ 60fps, 50fps, 30fps,25fps)
SD:
NTSC, PAL (simultaneous HD & SD video outputs)
HD-SDI 292 & NTSC/PAL
1 lux Color
.1 lux Black & White
3DNR
12X Optical
10X Digital (available upon request)
Wide 52.4⁰
Tele
4.64⁰
360° Continuous
0-90° (Digital Flip OFF) 0-180° (Digital Flip ON)
Max Preset Speed: 360⁰ / sec
100+ Positions
8 each
RS485 RX, Pelco Protocol, 2400-38.4Kbps (default: 2400bps)
Camera ID, Title, Mode & Angle (Multi-Language)
1 Normal Relays 5vdc/40mA Max
4 Normal Dry Contact
Lightweight aluminum, powder coated, nitrogen purged &
pressurized, thermostatically heated. 5” Fused Quartz dome
lens
Regulated +28VDC / 1 Amp
Regulated +28VDC / 4 Amp
6.0 pounds
Appropriately tested electronically and environmentally
SAME FORM, FIT, FUNCTION AS PREVIOUS AVS480 WITH DIFFERENT COMMAND PROTOCOL.
15467 Chemical Lane, Huntington Beach, CA 92649 ~ Office (714) 890-8200 ~ Fax (714) 890-8200
www.aerialviewsystems.com