UniFlow SE Aire-Stream
Laboratory Fume Hoods
(U.L. 1805 Classified)
ISO 9001 - 2008 Certified Company
• U.L.1805 Classification defines requirements specific to Laboratory Fume Hoods & Cabinets
• This Classification covers construction, materials, flammability and containment performance
• HEMCO’s test facility is compliant to test Fume Hoods for U.L.1805 Classification
UniFlow SE Aire-Stream Fume Hood Features
The UniFlow SE Hoods are available in Constant Air Volume CAV Air By-Pass or Variable Air Volume
VAV which provide for maximum energy efficiency and user protection, Explosion Proof models,
or CE models for International Electronic Configurations. Standard sizes of 48”, 60”, 72” & 96”
widths. The aerodynamic face opening with air foil provides uniform air flow into the fume chamber,
and thru the VaraFlow Baffle System, to the 12” Diameter bell shaped exhaust collar. Performance
tested to ASHRAE 110-1995, SEFA 1-2003, and U.L.1805 Classified.
UniFlow Superstructure exclusive unitized dual
Access Panel removable to access all Electrical services
wall composite fiberglass construction for sufrom a single point electrical box. 115 volt 60 Hz operation,
perior chemical resistance, strength,and duraT-8 two-tube vapor proof fluorescent light fixture, and light
bility. Meets U.L. 1805 with Flame Spread of less
switch on left column, all factory installed.
than 25 per ASTM E-84.
Full 36” Viewing Height
Air Flow Monitor
with 28.5” Sash opening
height for ease of access
and viewing tall apparatus
setup. Sash is 3/16 thick
tempered safety glass, vertical moving with single point
counter balanced,contoured
sash handle for efficient air
flow and ease of movement.
Available in Analog or
Digital, Continuously
monitors face velocity
airflow. Select and
calibrate at desired
FPM velocity set point.
Fume Chamber
Molded one-piece design
with coved corners.
Surface is white, glass
smooth for ease of cleaning and excellent light
reflectivity. U.L. 1805
Classified.
Angled Picture Frame
Opening Efficient air entry
into fume chamber. Angle
mounted service fixtures
are easily viewed and
user controlled.
Sash Stop located at
1/2 open sash height or
located to suit your
specific requirements.
VaraFlow Baffle System
Maintains uniform airflow
thru the VaraFlow Baffle
System to bell shaped
exhaust collar outlet.
Plumbing Services Fixtures
are Color coded to specific service. Electrical Services can be
mounted on right or left side.
Base Cabinet Available in
Tested.
a variety of styles and sizes
24”, 30”, 36”, and 48” wide.
Epoxy Coated Steel furniture
with chemical resistant powder coat finish. Meets SEFA
requirements.
Epoxy Work Surfaces
Solid Epoxy Resin, dished to
contain spillage. Color: Black
U.L. tested & Certified
to 1805 Classification.
Aerodynamic Airfoil Ergonomic design allows air to
Service Port Pass-Thru
Port allows cords, tubes or
cables to pass to and from the
fume hood. (Optional feature)
2
sweep across the work surface and maintain uniform
airflow. Ergonomic Sash Lift Contoured for efficient
airflow and ease of movement.
Visit our Web Site at www.HEMCOcorp.com
to see HEMCO’s complete line of accessories
and UniFlow Plan-A-Hood Spec Planner.
NEW Green Gas Fume
Hood Fire Extinguisher
where flammable or explosive situations are present
for Class A, B, and C fires.
(Optional feature)
Specifications & Ordering Information
UniFlow Se Air-Stream Fume hoods
available in CAV, VAV, Explosion Proof
and CE feature high efficiency, low flow,
and constant volume design in 48”, 60”,
72”, and 96” widths. Designed to meet
increasingly demanding Laboratory
requirements.
12” Dia. Exhaust
32”
Top View
A Width
24”
59”
Exhaust Air Volume for 100 FPM with Sash 100% Open
60”
72”
96”
CFM
773
938
1162
1613
SP
.16”
.24”
.38”
.225”
Exhaust Air Volume for 100 FPM with Sash 50% Open
CFM
385
474
592
800
SP
.06”
.10”
.13”
.08”
37”
36”
28-1/2”
View
Height
48”
Sash
Height
Width
End View
Front View
Specifications & Ordering Info
48”
60”
72”
96”
1. UniFlow SE Aire-Stream CAV Fume Hood Air by-pass low flow, constant air
volume hood. Dual wall unitized construction, all non-metallic corrosion and fire
resistant composite fiberglass construction. Molded fume chamber with white
glass smooth surface with all coved corners. Sash to be counter balanced, 3/16”
tempered safety glass with chemical resistant non-metallic PVC framing,track
and aerodynamic sash lift. Vapor proof two tube T-8 Fluorescent light fixture and
control switch are wired to a single point junction box. 115 volt / 60Hz AC All
electrical components are U.L. 1805 classified. Optional switches, receptacles
and exhaust blowers are available.
Model
45421
Model
45521
Model
45621
Model
45821
2. UniFLow SE Aire-Stream VAV Fume Hood Same as #1 above except
equipped with Variable Air Volume VAV restricted by-pass feature, in place of
CAV by-pass feature. Ducting must be connected to optional VAV and exhaust
system and controls.
Suffix
VAV-4
Suffix
VAV-5
Suffix
VAV-6
Suffix
VAV-8
3. UniFLow SE Aire-Stream Fume Hood with Explosion-Proof Light Same
as #1 above except, equipped with explosion proof vapor tight light fixture.
Class I, Group C & D , Class II Group E, F, & G, 115V / 60Hz U.L. listed fixture is
installed but not wired. Must be wired to comply with codes. Optional explosion
proof switches, receptacles and exhaust blowers are available.
Suffix
EXP-4
Suffix
EXP-5
Suffix
EXP-6
Suffix
EXP-8
4. UniFLow SE Aire-Stream CE Fume Hood Same as #1 above except
equipped to comply to International electrical configuration. 220V / 50Hz AC. Optional International electrical configuration, electrical switches, receptacles and
exhaust blowers are available.
Suffix
CE-4
Suffix
CE-5
Suffix
CE-6
Suffix
CE-8
5. Horizontal Sliding Sash Option - Add suffix to number above.
45HS-4
45HS-5
45HS-6
45HS-8
6. Combination Sliding Sash Option - Add suffix to number above
45CS-4
45CS-5
45CS-6
45CS-8
Model.No. 45421
Model.No. 45521
(A) Width
Model.No. 45621
Model.No. 45821-45HS-8
3
Complete Line of Innovative UniFlow Fume Hoods
The UniFlow
Laboratory Fume Hoods
SE, LE, CE, FM feature a low flow constant
volume hood and offers 50% energy savings. UniFlow
fume hoods are offered in sizes of 30”, 36”, 48”, 60”, 72” and 96”
widths and can be equipped with a wide selection of accessories to meet
your specific process need. UniFlow Superstructure exclusive unitized dual wall composite
fiberglass construction for superior chemical resistance, strength,and durability. Fume Chamber
Molded one-piece design with coved corners. Surface is white, glass smooth for ease of cleaning
and excellent light reflectivity. U.L. 1805 Classified. Work surfaces and base cabinets are available.
Request a Free Brochure At www.HEMCOcorp.com and browse the entire
selection of HEMCO Laboratory Equipment
UniMax ™ Large Floor Mount (Walk-In) Fume Hoods
UniFlow Laboratory
Fume Hoods
Catalog
UniMax Fume Hoods
HazMax Fume Hoods
Access Door/Sash Options
Laboratory Planning
Solutions Complete
Planning guide
Plumbing/Electrical Services
Exhaust/Ventilation Services
EnviroMax Enclosures for
Robotic and Automated
Lab Processes
Filter/Scrubber Services
Laboratory Planning Solutions
UniMax Large Floor Mount
(Walk-in) Fume Hoods
Catalog
HEMCO is a corporate member of the following organizations:
ASHRAE
American Society of
Heating Refrigeration and
Air-Conditioning Engineers
HEMCO Corporation
711 S. Powell Road
Independence, MO 64056
© 2010 HEMCO Corporation
Laboratory Planning Solutions
Scientific Equipment
and Furniture Association
Phone (816) 796-2900
Fax (816) 796-3333
SEB-10.10