®
The liner that works. Anytime. Anywhere.
T H E L I N E R T H AT W O R K S .
QuickSilver® dump body liners are engineered to withstand harsh field conditions,
protect your equipment and handle any kind of bulk material, so no more:
• sticky or frozen loads
• shoveling
• backhoe cleanouts
• risky dump angles
• chewed up floors
• damaged hydraulics and brakes
• warming sheds
• washdowns
With QuickSilver® liners, drivers stay put and loads do the moving.
• All kinds of loads.
Easily switch from hauling one bulk material to another. With QuickSilver® liners, you
can haul hot asphalt mix one day, sand, gravel, aggregate, lime, topsoils, petroleum
coke or some other material the next.
• All kinds of weather.
Loads move – during the dry or humid heat of summer and the subfreezing
temperatures of winter.
• All kinds of equipment.
From dump trailers and dump bodies to bottom dumps, gravel trains or transfer
trailers, QuickSilver® liners mean faster load release and less equipment damage.
• Dependability guaranteed.
QuickSilver® liners are so durable and dependable that Poly Hi Solidur guarantees their
success. Ask for details about our full three-year warranty.
• Tougher than the day is long.
QuickSilver®’s impact strength has been tested to 100ºF without cracking or breaking.
ANYTIME. ANYWHERE.
“We’ve lined nearly 200 of our dump
bodies and trailers with QuickSilver®
because we’ve seen how long the
liners last and how completely the
loads release. In fact, we’ve had some
of our QuickSilver® liners since 1996
and we haven’t worn one out yet. We
did buy a new trailer awhile ago that
came with a cheaper liner and it wore
out in a year. Down here, we haul
everything from sand to rip-rap and
scrap metal. Before we installed the
QuickSilver® liners, we had to use a
magnet to get all the scrap metal out.
With the QuickSilver® liner, we don’t
have to do anything but raise the bed –
and we’ve never turned over a trailer
with a QuickSilver® liner because the
load is out between the second and
third stage. We’d recommend this liner
to anyone.”
Lewis “Happy” Browning,
Patco (Montgomery Bulk)
Coleman, Florida
“We used to fix or replace the hoist
every other year, but since we got
QuickSilver® we haven’t done it in years.
There’s not as much strain on the hoist
since you don’t have to get the box as
high – as soon as you put it up in the air
the material is releasing quicker.”
Rocky Fanelli, Orchard Earth & Pipe
Syracuse, New York
“With our QuickSilver®-lined trucks, we can haul
almost everything – asphalt, sand, gravel, gabion
rock, even broken concrete. But what we’ve
really been impressed about is the fact that we
can use a QuickSilver® liner to haul San
Francisco Bay mud and that sticks to everything
– except the QuickSilver® liner. All the loads we
haul release smoothly and quickly from our
QuickSilver®-lined trucks.”
Phil Rogers, Owner, Rogers Trucking
San Francisco, California
“QuickSilver® liners pay for themselves within the 1st year in just labor costs
alone – not even counting the extra material you get to haul. The Georgia mud
we haul sticks whether it’s wet or dry, and with the QuickSilver® liners, we get
complete clean-out which means that on a full-day cycle, I make up to 2 more
runs than drivers in trucks without liners. Every new truck we get has a
QuickSilver® liner installed before the first load because the material releases
by the second stage so we don’t have to worry about tip-overs, and because
QuickSilver® liners help our trailer floors last forever. We were wearing out the
steel floors in about 4 years. Now, instead of buying the trailers with the extra
thick steel floors that add 2,000 lbs., we get the lighter duty 3/16” floor and put
in a QuickSilver® liner.”
Darrell Everett, Everett Construction Co.
Rome, Georgia
“QuickSilver® is very low maintenance and a great investment. Clean-up at the end of the day is quick and easy.
Before we installed QuickSilver®, our drivers had to knock out hardened sludge in the corners. Now we don’t have to.
Plus it wears so well that when we trade in our trucks, we take the liner out of the old truck and put it into the new one.”
Kurt Dey, Commissioner
Columbia County Highway Department
Wyocena, Wisconsin
THE RIGHT BRAND.
• A good investment.
This specially formulated polymer’s super slick, abrasion-resistant surface handles hot
asphalt up to 350°F. QuickSilver® liners wear longer than aluminum or steel, reducing
replacement costs.
• QuickSilver® liners save you money now and long-term;
• QuickSilver® liners are less expensive to install than an aluminum floor
replacement;
• QuickSilver® liners can be replaced in less than half a day, minimizing hauling
downtime; aluminum floor replacements can take up to a week;
• QuickSilver® liners reduce or eliminate carry-back, so drivers spend time hauling
loads and not digging out the bed.
• Innovative engineering services.
• continuous length sheet, any width up to 12’
• advanced installation techniques - pioneered hot asphalt hold-down plate
• quick turnaround time
8-foot liner
10-foot liner
12-foot liner
• The right brand.
Often imitated, but never duplicated, original QuickSilver® liners set the bar for
performance and durability. State-of-the-art technology. The highest quality resin.
Unparalleled service before AND after the sale. QuickSilver® liners measure up
time and time again with consistent thickness, sheet width and quality.
QuickSilver® is THE RIGHT BRAND.
®
3 - Y E A R
W A R R A N T Y
QuickSilver® liners are so successful and durable that Poly Hi Solidur has
expanded its warranty plan. Ask for details on our full 3-year warranty.
To learn more about QuickSilver®, call 1-800-234-8469.
POLY HI SOLIDUR
www.quicksilverliners.com/QS
Important: QuickSilver® like most plastics will ignite and sustain flame under certain conditions. Caution is urged where any material may be exposed to flame or heat-generating equipment.
Use Material Safety Data Sheets to determine auto-ignition and flashpoint temperatures of materials. Or, consult Poly Hi Solidur in Fort Wayne, Indiana, if additional information is needed.
©2004 Poly Hi Solidur, Inc. QuickSilver® is a registered trademark of Poly Hi Solidur, Inc.
B-QSTriFld0104