ASSEMBLY INSTRUCTIONS FOR
TILE TOP TABLE
®
PARTS LIST:
TOOLS REQUIRED:
PART #
A
B
C
D
E
F
G
H
I
QUANTITY
(1)
(2)
(1)
(1)
(1)
(1)
(4)
(4)
(22)
1.
SOCKET WRENCH
PART NAME
TABLE TOP
END LEGS
CENTER LEG SUPPORT
FABRIC LINER
UMBRELLA WASHER
PLASTIC BUSHING
LEVELING GLIDES
WING NUTS
TILES
Umbrella Washer
Tiles
Fabric Liner
Table Top
ASSEMBLY:
STEP 1:
VERIFY YOU HAVE RECEIVED ALL THE
PARTS IN THE PARTS LIST.
STEP 2:
INSERT LEVELING GLIDES [G] INTO END
LEGS [B].
STEP 3:
REMOVE FOUR BOLTS FROM CENTER LEG
SUPPORT [C].
Plastic Bushing
Center Leg Support
End Legs
Leveling Glides
STEP 4:
USING THESE BOLTS, ASSEMBLE CENTER
LEG SUPPORT [C] TO END LEGS [B].
STEP 6:
PLACE TABLE TOP [A] ON ASSEMBLED BASE, ALIGNING THE HOLES IN THE BASE WITH THE BOLTS ON THE UNDERSIDE OF THE TABLE TOP.
ATTACH TABLE TOP USING WING NUTS [H].
STEP 7:
LEVEL TABLE BY ADJUSTING LEVELING GLIDES.
STEP 8:
SPREAD FABRIC LINER [D] OVER MESH IN TABLE TOP.
STEP 9:
IF UMBRELLA IS TO BE USED, INSERT PLASTIC BUSHING (F) INTO TOP OF PIPE IN THE CENTER LEG.
STEP 10:
INSTALL TILES INTO TABLE TOP. SUFFICIENT TILES HAVE BEEN INCLUDED TO PROVIDE AN UMBRELLA POLE OPENING IF DESIRED. IF AN
UMBRELLA IS TO BE USED, INSTALL CUT TILES IN THE CENTER OF TABLE TOP [A]. INSTALL UMBRELLA WASHER [E] IN TILE OPENING TO
HOLD UMBRELLA POLE IN PLACE.
PLANTATION PATTERNS, P.O. BOX 1357, BIRMINGHAM, AL 35201, USA
70004399