Table of Contents
▲
Main Menu
▼
０５／０８／２９ １７：５３：５７ ３１Ｓ２Ａ６６０ ００１９ Additional Information About Your Seat Belts
Seat Belt System Components
Your seat belt system includes lap/
shoulder belts in both seating
positions. The seat belts are also
equipped with automatic seat belt
tensioners.
The seat belt system
includes an indicator on the
instrument panel and a beeper to
remind you and your passenger to
fasten your seat belts.
This system monitors the seat belts.
If you turn the ignition switch to the
ON (II) position before your seat
belt is fastened, the beeper will
sound and the indicator will flash. If
your seat belt is not fastened before
the beeper stops, the indicator will
stop flashing but remain on.
16
If a passenger does not fasten their
seat belt, the indicator will come on
about 6 seconds after the ignition
switch is turned to the ON (II)
position.
If either the driver or passenger does
not fasten their seat belt while
driving, the beeper will sound and
the indicator will flash again at
regular intervals.
When no one is sitting in the
passenger’s seat, or a small child is
riding there, the indicator will not
come on and the beeper will not
sound.
The seat belts use the same
monitoring system as the airbags.
The system may not work properly
under these conditions:
Placing heavy items on the
passenger’s seat.
The passenger is not sitting
properly.
Have your vehicle checked by a
dealer if the indicator comes on or
the beeper sounds when there is no
passenger or objects on the seat.
Table of Contents
▲
Main Menu
▼
０５／０８／２９ １７：５４：０３ ３１Ｓ２Ａ６６０ ００２０ Additional Information About Your Seat Belts
To fasten the belt, insert the latch
plate into the buckle, then tug on the
belt to make sure the buckle is
latched (see page 12 for how to
properly position the belt).
To unlock the belt, press the red
PRESS button on the buckle. Guide
the belt across your body so that it
retracts completely. After exiting the
vehicle, be sure the belt is out of the
way and will not get closed in the
door.
Both seat belts have an emergency
retractor. In normal driving, the
retractor lets you move freely in your
seat while it keeps some tension on
the belt. During a collision or sudden
stop, the retractor automatically
locks the belt to help restrain your
body.
Driver and Passenger Safety
Lap/Shoulder Belt
The lap and shoulder belt goes over
your shoulder, across your chest,
and across your hips.
The passenger’s seat belt has an
additional locking mechanism that
must be activated to secure a
forward-facing child seat (see page
34 ).
If the shoulder part of the belt is
pulled all the way out, the locking
mechanism will activate. The belt
will retract, but it will not allow the
passenger to move freely.
To deactivate the locking
mechanism, unlatch the buckle and
let the seat belt fully retract. To
refasten the seat belt, pull it out only
as far as needed.
17
Table of Contents
▼
Main Menu
▲
０５／０８／２９ １７：５４：１２ ３１Ｓ２Ａ６６０ ００２１ Additional Information About Your Seat Belts
Automatic Seat Belt Tensioners
The tensioners are designed to
activate primarily in frontal collisions,
and they should activate in any
collision severe enough to cause
airbag inflation.
However, the tensioners can be
activated during a collision in which
the front airbags do not deploy. In
this case, the airbags would not be
needed, but the additional restraint
could be helpful.
For added protection, the seat belts
are equipped with automatic seat
belt tensioners. When activated, the
tensioners immediately tighten the
belts to help hold the driver and a
passenger in place.
18
When the tensioners are activated,
the seat belts will remain tight until
they are unbuckled in the normal
manner.
If the seat belt tensioners ever
activate, they must be replaced,
because the belts would no longer
retract properly.
Seat Belt Maintenance
For safety, you should check the
condition of your seat belts regularly.
Pull each belt out fully and look for
frays, cuts, burns, and wear. Check
that the latches work smoothly and
the belts retract easily. If a belt does
not retract easily, cleaning it may
correct the problem (see page 157 ).
Any belt that is not in good condition
or not working properly will not
provide good protection and should
be replaced as soon as possible.
Honda provides a lifetime warranty
on seat belts for U.S. models. See
your Honda Warranty Information
booklet for details.
If a seat belt is worn during a crash,
it must be replaced by your dealer. A
belt that has been worn during a
crash may not provide the same level
of protection in a subsequent crash.
Table of Contents
▲
Main Menu
▼
０５／０８／２９ １７：５４：１６ ３１Ｓ２Ａ６６０ ００２２ Additional Information About Your Seat Belts
Not checking or maintaining
seat belts can result in serious
injury or death if the seat belts
do not work properly when
needed.
Driver and Passenger Safety
The dealer should also inspect the
anchors for damage and replace
them if needed. If the automatic seat
belt tensioners activate during a
crash, they must be replaced.
Check your seat belts regularly
and have any problem
corrected as soon as possible.
19
Table of Contents
▲
Main Menu
Additional Information About Your Airbags
Airbag System Components
(8)
(2)
(9)
(1)
(1) Driver’s Airbag
(2) Passenger’s Airbag
(3) Control Unit
(4) Front Seat Belt Tensioners
(5) Driver’s Seat Position Sensor
(6) Passenger’s Weight Sensors
(7) Passenger’s Weight Sensor Unit
(8) Front Impact Sensors
(9) Passenger Airbag Off Indicator
20
(4)
(3)
(6)
(5)
(6)
(7)
(4)
▼
０５／０８／２９ １７：５４：２１ ３１Ｓ２Ａ６６０ ００２３ Table of Contents
▲
Main Menu
▼
０５／０８／２９ １７：５４：２９ ３１Ｓ２Ａ６６０ ００２４ Additional Information About Your Airbags
Your airbag system includes:
Automatic seat belt tensioners
(see page 18 ).
Sensors that can detect a
moderate to severe front impact.
Sensors that can detect whether a
child is in the passenger’s airbag
path and signal the control unit to
turn the airbag off (see page 24 ).
A driver’s seat position sensor that
monitors the distance of the seat
from the airbag. If the seat is too
far forward, the airbag will inflate
with less force (see page 24 ).
An indicator on the dashboard that
alerts you that the passenger’s
airbag has been turned off (see
page 26 ).
Emergency backup power in case
your vehicle’s electrical system is
disconnected in a crash.
A sophisticated electronic system
that continually monitors and
records information about the
sensors, the control unit, the
airbag activators, the seat belt
tensioners, and driver and
passenger seat belt use when the
ignition switch is in the ON (II)
position.
An indicator on the instrument
panel that alerts you to a possible
problem with your airbags,
sensors, or seat belt tensioners
(see page 25 ).
21
Driver and Passenger Safety
Two SRS (Supplemental Restraint
System) airbags. The driver’s
airbag is stored in the center of
the steering wheel; the passenger’s
airbag is stored in the dashboard.
Both are marked ‘‘SRS AIRBAG.’’
Weight sensors and unit that
monitor the weight on the
passenger’s seat. These
automatically turn off the
passenger’s airbag if they detect
an infant or small child may be in
the seat (see page 24 ).
Table of Contents
▼
Main Menu
▲
０５／０８／２９ １７：５４：３７ ３１Ｓ２Ａ６６０ ００２５ Additional Information About Your Airbags
How Your Front Airbags Work
During a frontal crash, your seat belt
restrains your lower body and torso,
and the airbag helps protect your
head and chest.
Although both airbags normally
inflate within a split second of each
other, it is possible for only one
airbag to deploy.
If you ever have a moderate to
severe frontal collision, sensors will
detect the vehicle’s rapid
deceleration.
This can happen if the severity of a
collision is at the margin, or
threshold, that determines whether
or not the airbags will deploy. In
such cases, the seat belt will provide
sufficient protection, and the
supplemental protection offered by
the airbag would be minimal.
If the rate of deceleration is high
enough, the control unit will instantly
inflate the driver’s and passenger’s
airbags, at the time and with the
force needed.
Only the driver’s airbag will deploy if
there is no passenger in the
passenger’s seat, or if the advanced
airbag system has turned the
passenger’s airbag off (see page 24 ).
22
After inflating, the airbags will
immediately deflate, so they won’t
interfere with the driver’s visibility,
or the ability to steer or operate
other controls.
The total time for inflation and
deflation is one-tenth of a second, so
fast that most occupants are not
aware that the airbags deployed until
they see them lying in their laps.