SCHOOL OF ENGINEERING
CONFERENCE ON MODERN STEELS
DEVELOPMENT AND MODELLING
30th - 31th March 2017
Wels Campus
University of Applied Sciences Upper Austria
Stelzhamerstrasse 23, 4600 Wels
Austria | Europe
www.fh-ooe.at/campus-wels
SCHOOL OF ENGINEERING
CONFERENCE ON MODERN STEELS
DEVELOPMENT AND MODELLING
2017, March 30th - 31st
Abstract
This event is a symposium on modern high-strength steels designed
to provide postgraduate-level and research workers in materials science and materials engineering. It offers a basic knowledge on
some selected aspects.
Talks held by experts from academics and industry will review several topics, such as steel design, microstructures and mechanical
properties, phase transformation, and modelling. The workshop is
a platform, which allows to discuss the current knowlegde on modern generations of high-strength steels.
The workshop will take place on March 30th and 31st at the University of Applied Sciences - Wels Campus. On March 31st after the
symposium, a get together event will take place, allowing further
scientific exchanges and discussions.
2
MSDM 2017 Conference
SCHOOL OF ENGINEERING
CONFERENCE ON MODERN STEELS
DEVELOPMENT AND MODELLING
2017, March 30th - 31st
2017, March 30th
Registration and Opening
- 11:00 am-12:00 pm: Registration (A-Building, Room HS-008, FHWels)
- 12:00 pm-12:15 pm: ”Welcome and Opening”, Dr. Ir. Ludovic
Samek, Prof. for Metal Sciences, University of Applied Sciences
- Wels Campus
2017, March 30th
Session on Physical Modelling and Numerical Simulations
- 12:15 pm-12:45 pm: ”Physical Modelling of Modern High-Strength
Steels”, Prof. Dr. Ir. Adam Grajcar, Silesian University of Technologies
- 12:45 pm-1:15 pm: ”Modelling and Industrial Perspectives for Endless Strip Production of Steels”, Dipl.-Ing. Axel Rimnac, Primetals
Technologies GmbH
- 1:15 pm-1:45 pm: ”Design of Metal Forming Processes by using
Numerical Simulations Integrated with High Performance Computing Infrastructures”, Prof. Dr. Danuta Szeliga, AGH University of
Science and Technology
- 1:45 pm-2:15 pm: ”Inverse and Sensitivity Analysis in Identification
of Material and Process Parameters”, Prof. Dr. Ir. Lukasz Rauch,
AGH University of Science and Technology
- 2:15 pm-2:45 pm: ”Thermodynamic and Kinetic Modelling of MultiComponent Multi-Phase Materials”, Aurélie Jacob, TU Wien
- 2:45 pm-3:15 pm: ”Computational Thermodynamics and Kinetics
for Steel Development”, Dr. Shan Jin, Thermo-Calc Software AB,
Stockholm
- 3:15 pm-3:45 pm: Coffee break
3
MSDM 2017 Conference
SCHOOL OF ENGINEERING
CONFERENCE ON MODERN STEELS
DEVELOPMENT AND MODELLING
2017, March 30th - 31st
2017, March 30th
Session on Austenite Transformations and Physical Properties
- 3:45 pm-4:15 pm: ”Dislocation based Modelling of Mechanical Properties of Multiphase High-Strength Steels”, B.Sc. Karan Babbar,
University of Applied Sciences - Wels Campus
- 4:15 pm-4:45 pm: ”Intercritical Annealing of Third Generation AHSSSteels with Medium Manganese Contents”, B.Sc. Robert Hofer,
University of Applied Sciences - Wels Campus
- 4:45 pm-5:15 pm: ”Characterization of Density Reduced MnAl-TRIP
Steel Concepts”, B.Sc. Simone Kaar, University of Applied Sciences - Wels Campus
4
MSDM 2017 Conference
SCHOOL OF ENGINEERING
CONFERENCE ON MODERN STEELS
DEVELOPMENT AND MODELLING
2017, March 30th - 31st
2017, March 31st
Session on Advanced High-Strength Steels
- 9:00 am-9:30 am: ”Third Generation Advanced High-Strength Sheet
Steels”, Prof. Dr. Ir. Emmanuel De Moor, Colorado School of Mines
- 9:30 am-10:00 am: ”Development of Batch-Annealed Medium-Mn
Steels”, Dr. Ir. Daniel Krizan, voestalpine Stahl GmbH
- 10:00 am-10:30 am: ”Metallurgical Aspects of Weldability of Thermomechanically Processed Advanced High-Strength Sheet Steels”,
Prof. Dr. Ir. Adam Grajcar, Silesian University of Technology
- 10:30 am-10:45 am: Coffee break
- 10:45 am-11:15 am: ”Dynamic Behavior and Microstructure Analysis of High-Manganese Austenitic TWIP Steel”, Prof. Dr. Ir. Magdalena Jablonska, Silesian University of Technology
2017, March 31st
Session on Micro-Alloyed High-Strength Steels and Wires
- 11:15 am-11:45 am: ”Micro-Alloyed Wire Steels”, Prof. Dr. Ir. Emmanuel De Moor, Colorado School of Mines
- 11:45 am-12:15 pm: ”Recent Developments on Wire Rod Steels”,
Dr. Ir. Robert Kienreich, voestalpine Wire Rod Austria GmbH
- 12:15 pm-1:00 pm: Lunch Break, Standing Buffet
5
MSDM 2017 Conference
SCHOOL OF ENGINEERING
CONFERENCE ON MODERN STEELS
DEVELOPMENT AND MODELLING
2017, March 30th - 31st
2017, March 31st
Session on Microstructures and Properties
- 1:00 pm-1:30 pm: ”Overview of Microscopic Identification and Classification of Microstructures in AHSS”, Dr. Johann Angeli, MSc.,
Lecturer FH Wels and voestalpine Stahl GmbH
- 1:30 pm-2:00 pm: ”Microstructure Characterization and Carbide Precipitation in High-Strength Steels”, Prof. Dr. Ir. Sophie Regnier,
University of ICAM Toulouse
- 2:00 pm-2:30 pm: ”Relationship Structure-Properties of Density Reduced MnAl-Steels”, Dr. Ir. Ludovic Samek, Prof. for Metal Sciences, University of Applied Sciences - Wels Campus
- 2:30 pm-2:45 pm: Coffee break
- 2:45 pm-3:15 pm: ”Development of High-Strength Welding Consumables by Means of Numerical Modeling and Microstructural Characterization”, Dipl.-Ing. Holly Sylvia, voestalpine Boehler Welding
Austria GmbH
- 3:15 pm-3:45 pm: ”Simulation of Industrial Processes to Optimize
Micro-Structure and Properties using DSI/Gleeble Simulators”, Ph.D.
Brian J. Allan, P.E., Dynamic Systems Inc.
- 3:45 pm-5:45 pm: Get Together Evening, Buffet
6
MSDM 2017 Conference
SCHOOL OF ENGINEERING
CONFERENCE ON MODERN STEELS
DEVELOPMENT AND MODELLING
2017, March 30th - 31st
More Information and Registration
The registration to the conference is possible via the website of the
conference until 2017, March 28th .
Registration fee: 250 EUR excluding 10% VAT. The registration fee
includes: conference participation, electronic proceedings (after the
conference), and participation at the get together event, snacks and
beverages during the conference.
Fore more information, please contact either Mr. Dr. Ludovic Samek
or the secretary of MKT-studies.
Phone: +43-50804-43911, E-mail: [email protected],
Phone: +43-50804-43060, E-mail: [email protected]
Website and registration: http://www.fh-ooe.at/msdm
7
MSDM 2017 Conference
HAGENBERG | LINZ | STEYR | WELS
University of Applied Sciences Upper Austria
School of Engineering
Roseggerstr.
Stelzhamerstraße 23
4600 Wels | Austria
Tel.: +43 5 0804 43911
Fax: +43 5 0804 943911
[email protected]
www.fh-ooe.at
/fhooe.at
A25
Magazinstr.
Roseggerstr.
car park
KaiserJosef
Platz
FH OÖ
Wels Campus
Bus
station
Dr.-Schauer-Str.
B1
Railway station
RAILWAY
STATION
CITY
B1
Passau
EXIT
Wels NORD
B137
HansSachs-Str.
B1
Stelzhamerstr.
Towards Wels
EXIT
Wels OST
A25
Herrenstr.
Ringstr.
Alderstr.
car park
Traunpark
Linzer Strasse
B1
Towards Linz
B138
Towards Sattledt
Salzburg/Wien/Graz
A1
A9