·
·
·
·
Peninsular Sizing Chart
Welded Cylinders
PRINT
this Blank
Blank Template
Template Page
Page
COPY this
PRINT
the APPLICATION
APPLICATION DATA
DATA SHEET
SHEET (On
(next
(SCROLL
page)
COPY the
Page
1)DOWN)
FILL IN the Required Information on BOTH
BOTH PAGES
PAGES
FAX BOTH PAGES to Peninsular at (586) 775-4545
Date Submitted: ______________ No. of Pages ________
Female Clevis Mount
Name: __________________________________________
Company: _______________________________________
Phone: _______________________________________
Fax:
_______________________________________
Email: _______________________________________
Rod Diameter
ABOVE: Fill in actual Cylinder Dimensions. BELOW: Check ALL applicable boxes & provide ALL INFORMATION to best describe the Cylinder
Referencing the diagram below, indicate the SIDE LOCATION #
for PORTS and/or Optional CUSHION ADJUSTMENT SCREWS
for both the FRONT & REAR End Caps
AIR CYLINDER - Indicate Working Pressure: ________
High Pressure with Tie Rods
Low Pressure with Tie Rods
FRONT END CAP
Welded Type without Tie Rods
If Hydraulic - Indicate Working Pressure: __________
·
If Hydraulic - Indicate Maximum Rated Pressure: _____
If Hydraulic - Indicate Fluid Type: ________________
Is the Cylinder an NFPA Cylinder ?
Is the Cylinder METRIC ?
Yes
Yes
No
No
4
if METRIC, specify Standard:__________________
End Cap STYLE: Welded
Threaded
Snap Ring
Cylinder TUBE MATERIAL: _____________________
Cylinder END CAP MATERIAL: __________________
Are PROXIMITY SWITCHES used?
1
·
Yes
2
REAR END CAP
·
3
·
No
BORE Size: _________ STROKE Length: _________
PISTON ROD DIAMETER: __________
PISTON ROD THREADS: Male
Female
Other
(Describe): ________________________
Specify PISTON ROD THREAD DIAMETER, PITCH & LENGTH (example: 3/4” - 16 x 1.125”) : _______________________________________
PORT THREAD TYPE:
NPT
SAE (O-Ring)
Other (Describe)
Does the Cylinder have OPTIONAL CUSHION(s)? No
on BOTH End Caps
PORT THREAD SIZE (Specify): ___________________
FRONT END CAP Only
REAR END CAP Only
Indicate Existing Cylinders MANUFACTURER & MODEL NUMBER : ___________________________________________________________
Is a Spherical Rod Eye Required ? Yes
No
(If Yes, Provide Dimensions Above)
Are Grease Fittings Required ?
Yes
No
Indicate any other Special Cylinder Features if applicable. If available, provide Sketches, Engineering Drawings and Photog raphs of
the Cylinder. If applicable, indicate the Mode of Cylinder Failure, Harsh Environmental Factors, Electronic Positioning Devices or any
other Pertinent Information regarding the existing Cylinder. For any questions, please call Peninsular Inside Sales at 1 -800-526-7968.
Phone (586) 775-7211 · Toll Free (800) 526-7968 · Fax (586) 775-4545 · www.peninsularcylinders.com · email: [email protected]
REV. 2
Page
30APPLICATION
ALSO, FILL
FILL IN
IN THE
THE BELOW
BELOW
APPLICATION DATA
DATA SHEET
SHEET
ALSO,
APPLICATION DATA SHEET
for NON-STANDARD Air or Hydraulic Cylinders
®
PENINSULAR
C Y L I N D E R C O.
PRINT this APPLICATION DATA SHEET
PRINT the SIZING CHART for the cylinder you need
FILL IN the Required Information on BOTH PAGES
FAX BOTH PAGES to Peninsular at
BELOW: Check ALL Applicable Boxes & provide ALL INFORMATION to best describe the Cylinder
Date Submitted: __________________________
Type of Business: ______________________________
Company Name: _____________________________________
Contact Name: __________________________________
Address: ________________________________________
Title: ______________________________________
City: ______________ State: _______ Zip : ___________
Telephone: _____________ Fax: ______________
Country: __________________________
Email: _____________________________________
CHECK ONE:
Distributor
End User
OEM
Other
Website: ___________________________________
CYLINDER SPECIFICATIONS
AIR CYLINDER - Indicate Working Pressure: ________________
BORE Size: _____________
STROKE Length: _____________
HYDRAULIC CYLINDER
MOUNTING STYLE: ____________________________________
If Hydraulic - Indicate Working Pressure: ________________
PISTON ROD DIAMETER: ____________
If Hydraulic - Indicate Maximum Rated Pressure: ___________
PISTON ROD THREADS:
Male
Female
Other
(describe Piston Rod Threads): ________________________
If Hydraulic - Indicate Fluid Type: ______________________
(necessary because some Hydraulic Fluids destroy Seals)
Yes
Does the Cylinder have CUSHION(s)?
OTHER - Describe: ___________________________________
If Yes:
FRONT END CAP
No
REAR END CAP
What is the Work Being Performed?
Weight of Load moved:
on Extend: _________ lbs.
on Retract: _________ lbs.
on BOTH Extend & Retract: _________ lbs.
Cylinder Cycle Rate:
_______ Cycles per Minute
_______ Cycles per Hour
_______ Cycles per Day
Rod Speed: Extending ________“/sec.
Retracting ________“/sec.
How many days per week will this cylinder operate?________
What is the Cylinder Orientation?
Cylinder is Mounted: Vertically
Rod Up
Rod Down
Is Cylinder Piston Rod or Load Guided or Supported? Yes
Is Side Load Present? Yes
No
Angle Degrees: from Vertical _________
No
from Horizontal ________
(if Yes, explain) __________________________________________
(if Yes, explain) _______________________________________
Side Load Weight: _________ lbs.
What are the Environmental Conditions that the Cylinder is Subjected to?
What is the present Cylinder Type & Model Number if applicable? _____________________________________________________________ _
Temperature at the Cylinder (if applicable) is ________ Degrees F.
Is the temperature constant? Yes
No
What is the variable temperature range (if applicable)?
from: __________ Minimum Degrees F
to ________ Maxi mum Degrees F.
Cylinder Environment conditions: Corrosive Chemicals present
Abrasives present
Water present
Outdoors
Other (please explain): ___________________________________________________________________________________________
What is the Application or Special Requirements?
Are there any optional features applicable to this cylinder? Yes
No
If yes, please explain: ____________________________________
What industry is the cylinder used in? _____________________________________________________________________________________
What type of machine is the cylinder used on? ______________________________________________________________________________
What is the present problem/failure mode? _________________________________________________________________________________
Is a Cylinder ACCESSORY Required? (ex. a Rod Clevis) : No
Yes
(indicate the type of Accessory ___________& provide Dimensions on Page 10)
Describe Application and/or Draw a Sketch of the Cylinder Within the Application.
Draw any Special Features Contained on this Cylinder (attach drawing if necessary)
Phone: (586) 775-7211  Toll Free: (800) 526-7968  Fax: (586) 775-4545 www.peninsularcylinders.com  email: [email protected]
REV.
SF-14-R02