GURO-DONG, BYOKSAN 3 CHA 105, 271 DIGITAL RO, GURO-GU, SEOUL, KOREA
TEL 82 2 2025 1151 FAX 82 2 2025 1154 E-MAIL :[email protected]
Name of goods
 Model :Q-TERRA
Q-SWITCHED
Nd:YAG LASER
SYSTEM
Main Display
-Specification Wavelength
Pulse Duration
Pulse Energy
1064 / 532nm
5 – 6ns
1.8J
Double-Pulse
1064nm
532nm
500mJ
Quasi-Long(Genesis mode) 2.3J
Pulse Duration:330us
Repetition Rate
Spot Size
1-10 Hz
1-10 mm, Zoom Handpiece
7mm, Collimation
7m*7mm, Fractional
Features of competitive advantages












It is designed ergonomically.
It is possible to perform a precise treatment only by the handling of the auto zoom hand
piece.
It is upgraded to feature a homogenous beam profile
The state-of-the-art beam mode is now employed (Top hat Mode).
A soft peeling is possible to bring out a skin whitening effect.
It is cost-efficient in its maintenance and is of better quality than those of other
competitors.
The treated spot is quickly recovered, it consumes less time to perform an operation, and
it has no adverse effects.
The short pulse width can reduce pain during the treatment.
The equipment of a latest cooling system enables a long use.
A shutter device is equipped inside for safety.
The equipment of a guide beam enables operator to radiate easily the laser beam on the
spot to be treated.
Its handling is simple and easy.
V.R.M Mode
Multi Mode
energy
energy
Beam shape
Beam shape
BEAM MODE
Gaussian mode
Top hat mode(Q-TERRA)
energy
energy
Beam shape
Beam shape
Explanation of Dual pulse 1.8J
Q-TERRA supports to activate consecutive dual pulse and maximum energy
of 1.8J (Normal mode) is available
* (Dual pulse)*10HZ = Practically 20Hz d/t Dual pulse
◆ Q-TERRA with 10 Hz provides fast treatment
* It provides easier and faster treatment with larger spot.
◆
APPLICATIONS









Tattoos
Soft peeling
Vascular lesion removal
Nevus of ota
Lentiginosis
Freckle
Wrinkle
Cafe au lait
Tattoo on eye brow
Accessories
①Handpiece
③Carbon cream
②Protective goggles
④ eye shield
what is softpeeling
★summary
 As exclusive for peeling, Q-TERRA softpeeling is a particular laserpeeling method,
spreading the manufactured carbon cream and making use of 1064 wavelength with short
pulse (5-6ns).
★effect
 ① Lighting Q-switch laser on the skin in order, it normalizes the overkeratinization by removing the horny layer of the cuticle
 ② Promoting regrowth of collagenous fiber and elastic fiber of the dermis
 ③ improving the skin aging by removing keratin and impurities on the
surface of the skin.
 ④ at the same time to make the melasma and the mote thin, it is effectively
used to fine wrinkles. acnes, and pore contraction.
Q-TERRA softpeeling
(Carbon peeling) process
★ At the intervals of 2-4 weeks, it is a treatment method concentrating the laser ray into the
deep skin to stimulate and induce the collagen layers by performing 3-4 times repeatedly.

▶1st: spreading the fine particle carbon lotion on the whole treatment area, clean the
remaining carbon cream in 10-15 minutes.

▶2nd: after adopting an optimum energy, shoot Q-TERRA laser for 2-3 passes equally on
the carbon cream sprayed area, so that thermal effect of the carbon cream
absorbing laser can be delivered into the deep skin.

▶3rd : the process like this is to help young and new skin regrow because the skin horny
layer was equally removed through the instant explosion of the carbon particle.

▶4th: the area with wrinkles or expanded pores produces additional remodeling effect of
the inner skin by repeated lighting through enhancing the parameter.
Procedure of soft peeling
(Normal mode)

①Wear protective goggles
②Wear carbon cream

④Perform a treatment
⑤Complete the treatment
③Wait for about 10 minutes
after applying the cream
⑥ Apply a mask pack
Applications of soft peeling






When you want to maintain an elastic skin
When you want to have a bright and clear skin
When you want to remove liver spots, fine wrinkles, lentigos etc
When you want to tighten the skin pores
When you want a treatment that brings out a quicker effect.
*The soft peeling can maintain its effects for about a month, with variations
from the types of the skin. The treatment time is very short; so a patient can
go back to normal daily routine next day and also wear makeup.
HOW TO USE LONG PULSE MODE



















◆ How to use genesis Mode.
1) Before genesis mode use , please put carbon cream on the face
superficially and wait upto 5-10 minute to dry the carbon slightly.
2) genesis mode recommend to use as 7 mm – 8mm spot size
with approx. 2.0 - 2.5 J/cm 2 and laser beam need to delivered
in a single pass, minimal overlapping to the skin which is covered
by carbon cream .
The reason of single pass or minimal overlapping is to prevent excessive
heat transferring to the skin.
The pulse duration of genesis mode is 330 us and it can make heating carbon
creams and it will make thermal effect in the skin and skin cell re-generation.
Through these effectiveness can also improve the appearance of acne , acne scar
and wrinkles.
◆ Remark
A) This genesis mode should never be used for the treatment of melasma
due to heat will exacerbate pigmentation and make lesions more darker.
B) After finish the treatment genesis mode beam, please change “Normal Mode (1064nm)”
finally and please remove of carbon cream completely through “Normal Mode (1064nm).
We recommend you to use Normal Mode with 7-10 mm spot size (fluence 1.82-1.99j/㎠)
Treatment parameters
(Genesis mode +normal mode)
Treatment parameters(1064,532)
Lesion
Wave length
Energy(Display)
Ota’s nevus
1064nm
Energy:400-600mj
H.P Spot size(energy)
2mm:12.74-19.11j/㎠
3mm:5.66-8.49j/㎠
Frequency:2-5HZ
Blue Nevus
1064nm
Energy:400-600mj
H.P Spot size(energy)
2mm:12.74-19.11j/㎠
3mm:5.66-8.49j/㎠
Frequency:2-5HZ
Tattoo on eye
brow
1064nm
Energy:300-400mj
H.P Spot size(energy)
2mm:9.55-12.74j/㎠
3mm:4.25-5.66j/㎠
Frequency:4-5HZ
Blue & black
tattoo
1064nm
Energy:400-600mj
H.P Spot size(energy)
2mm:12.74-19.11j/㎠
3mm:5.66-8.49j/㎠
Frequency:2-5HZ
PICTURE
Lesion
Wave length Energy(Display)
Soft peeling
(Normal mode)
Fine Wrinkle,
skin rejuvenation
etc.
1064nm
Energy:600-800mj
H.P Spot size(energy)
6mm:2.12-2.83j/㎠
10mm:0.76-1.02j/㎠
Frequency:4-6HZ
Red tattoo
532nm
Energy:50-100mj
H.P Spot size(energy)
3mm:0.71-1.42j/㎠
4mm:0.40-0.80j/㎠
Frequency:2-5HZ
Epidermal
pigmented lesion
(freckle, melasma,
lentigo, black
lentigo)
532nm
Energy:50-100mj
H.P Spot size(energy)
3mm:0.71-1.42j/㎠
4mm:0.40-0.80j/㎠
Frequency:2-5HZ
Cafe au lait
532nm
Energy:50-100mj
H.P Spot size(energy)
3mm:0.71-1.42j/㎠
4mm:0.40-0.80j/㎠
Frequency:2-5HZ
PICTURE

Treatment parameter can be differed from the upper mentioned ones due to tissue characteristic of
each personal (or ethnics). upper values are just showing generally recommended parameters.
Therefore, while inexperienced doctors operations, they are recommended that the operators
should start each treatment with minimum values of upper parameters.
 Cycle of treatment
Lesion
Number of treatment
Ota’s nevus
3-5
Red nevus
3-5
Tattoo on eye brow
1-2
Blue & black tattoo
4-6
Soft peeling(Carbon peeling)
3-4
Red tattoo
4-6
Epidermal pigmented lesion
(freckle, melasma, lentigo,
black lentigo)
2-3
Caf’e aulait
3-4
Fractional Handpiece
High treatment efficacy by deep laser penetrating
Minimize , Hypo-pigmentation and side effect
Epidermis sparing during High fluence treatment
49 dots in 10 by 10mm spot size
Before & AFTER
*Acne
This patient got Carbon peeling with 1064nm, Nomal Mode, Energy 10mm:0.764j/㎠
Frequency:5Hz one time.
The right picture is an operation result that acne was disappeared after 10 days.
Before & AFTER
*Pigmentation
These pictures are the surgical operation result of an patient who has pigmentation
got operation with energy :50mj spot size:4mm:0.398j/㎠,Frequency:3Hz and 532nm.
The right picture is an appearance of patient after 15dyas.
Before & AFTER
*Winkles
These pictures are the surgical operation result of an patient who has winkles got
Carbon peeling. Every 3weeks the patient got two operations with Energy:800mj,H.P
Spot size(energy),10mm:1.019j/㎠,Frequency:6Hz and parameter was set 1064mm. It is
good for operated patient to apply serum after operation.
Before & AFTER
*
Inflammatory acne
These pictures are the surgical operation result of an patient who has inflammatory acne
got operation with Long pulse mode + Normal mode at the same time. Firstly, applied
carbon cream to skin , and then used energy:800mj spot size:7mm:2.08j/
㎠,Frequency:2Hz and 1064nm long pulse mod. Secondly, changed from 1064nm long
pulse mode to 1064nm Normal mode and then used energy:1000mj spot
size:10mm:1.99j/㎠,Frequency:5Hz
Before & AFTER
*Freckle
These pictures are the surgical operation result of an patient who has freckles got operation
with energy:50mj spot size:4mm:0.398j/㎠,Frequency:2Hz and 532nm. The patient
applied serum to skin consistently so skin tone got brighter and pigmentation was reduced.