Kverneland Chisel Ploughs
Chisel Ploughs and
Sub Soilers for tough
conditions
Kverneland CLG-II
- Designed with the latest and flexible bolt-on construction
- for deep operation and elimination of soil compaction
down to 60 cm
The Kverneland CLG-II is designed to loosen subsoil and break
up tractor wheel and tram-line tracks.
To improve the soil structure and promote good drainage.
Increas the soil’s permeability and improve seedbed conditions
for fast and better germination.
Technical Specifications
Working
width up to
No. of
tines
Transport
width
Tine spacing
Base weight
Power requirement from
1.20-2.25 m
2
2.20 m
0.60 - 2.00 m
525 kg
50kW / 68 HP
0.90-2.25 m
3
2.20 m
0.30 - 1.00 m
575 kg
70 kW / 95 HP
1.50-2.25 m
5
2.20 m
0.30 - 0.45 m
795 kg
110 kW / 150 HP
Top quality in all components
All components fitted to the Kverneland
CLG-II are heat-treated to stand up to
the extreme tough conditions these
implements are to work.
Improved soil structure
The Kverneland CLG-II is designed for
loosening the subsoil and to break up
wheel tracks to improve soil structure
and promote good drainage. Increasing
the soil’s permeability improves seedbed
conditions for fast germination by
promoting drainage and efficient
gaseous exchange, and thereby
effective nutrient uptake.
Effective penetration
The shape of the tines provides good
penetration, even in hard dry conditions.
Elimination of tramlines
The Kverneland CLG-II can be used for
elimination of tramlines.
New flexible ”bolt-on”
construction
To provide a flexible construction with
optimal possibilities to adjust the tine
spacing and at the same time have the
option to increase the implement size,
Kverneland have developed a unique
connection clamp for bolting the whole
construction together. Test from our
laboratories as well as field trials.
One or more tines can easily be taken
out of work if needed in hard
conditions.
Auto-reset tines
The CLG-II is fitted with the well-known
Kverneland auto-reset system which has
been used on Kverneland ploughs for
many years. The leaf spring protection
system is very simple, but strong and
reliable. It has proven reliability for
trouble free working year after year, with
little or no maintenance.
When encountering an obstruction,
individual leaf springs allow each leg to
trip and ride over the problem area,
returning to their original position
automatically.
Depth control wheels are available as
option.
Each leaf spring is adjustable (by the
addition of leaf sections) to provide a
range of point load pressures from 600
up to 1,200 kg. The standard spring has
7 leaves. For extreme heavy conditions
double springs can be added.
All models can be extended. Depth
wheels are available as option.
The special heat-treated point gives
excellent penetration in the toughest
of soils.
Adjustable tine spacing
Standard tine spacing is 60 cm and is
effective in most conditions. However,
the unique flexible frame construction
allows simple adjustment of the tines.
Tines can be taken out or tines can be
added, just as you wish. Even the
frame construction can be changed
because of its bolted construction.
Kverneland CLE
- Works to a depth of up to 70 cm
The Kverneland CLE is a modern V frame subsoiler for
heavy duty pan busting.
Tine design and position ensures thorough sub surface
loosening, without bringing subsoil up into the seedbed.
The wedge shaped replaceable shin
pieces cut through the soil,
minimising surface disturbance.
Auto-reset tines
The CLE is fitted with single or
double leaf spring protection for
positive ground engagement yet
maximum impact damage protection.
The same spring protection is to be
found on hundreds of thousands of
Kverneland ploughs turning soil all
over the world.
Thorough soil disturbance
For thorough soil disturbance, each
leg is fitted with 300 mm wing
shares, with the option of 650 mm
versions for additional shattering in
extreme conditions.
All wearing parts are easily
replaced.
Minimised blocking
The V shaped frame and rear
mounted positioning of the
standards improves underframe
clearance, thereby minimising
blockages in trashy conditions.
Tine spacing can be adjusted from
60 to 90 cm.
Double auto-reset leaf spring
protection fitted as standard.
The Kverneland CLE is available
with 1, 2, 3 or 5 tines.
Depth control wheels are available
as option.
650 mm lateral wing shares are
available as an option.
Technical Specifications
Working
width
Transport
width
No. of
tines
Power requirement from
Base weight
Farme profile
2.50 m
1
45kW / 61HP
250 kg
100x100 mm
1.80 - 2.70 m
2.50 m
2
65kW / 88HP
590 kg
100x100 mm
1.80 - 2.70 m
2.50 m
3
90kW / 122HP
750 kg
100x100 mm
3.00 - 4.50 m
4.20 m*
5
150kW / 204HP
1400 kg
180x180 mm
Original Spare Parts
The Kverneland Group regards the sale of each
machine as the start of a long-term and valuable
relationship. To support the relationship, we
provide the vital high quality spare part and an
efficient spare part service.
You can depend on the Kverneland Group to offer
a premium service. It's vital for us!
Ask for other implements in
the Kverneland program
Kverneland Group is the
largest specialised producer
and distributor of farming
implements in the world.
The Group is a family
of strong brands enabling
us to provide both the farmer
and dealer with a unique and
complete range of high
quality products for soil
preparation, grass treatment,
seeding, spreading,
spraying, potato cultivation
and grape harvesting.
Kverneland - No. 1 in plough
production. The complete program
consists of all types and sizes of
ploughs from the small 2-furrow to
the big 14-furrows.
Kverneland ES
Kverneland’s program of different
cultivators includes several seedbed
cultivators, special seedbed
combinations, different cultivators,
deep cultivators and sub-soilers.
Kverneland CLC
www.kvernelandgroup.com
Kverneland Power Harrows and
Rotary Tillers have gone through a
reasonable development during the
last years and are now taking an
ever increasing share of the market
all over the world.
Kverneland Power
Harrow
Kverneland Group Operations Norway AS
Kverneland Group Klepp
NO-4355 Kvernaland
E mail: [email protected]
742387 2 000 11.2005 PROSESSEN
www.kvernelandgroup.com/kverneland
Kverneland reserves the right to make changes in design and specification or to add new features without obligation on implements purchased before or after such changes are made.