Emission Line
1.110.06
Isokinetic Heated Probe
Condensing and adsorbing device MCS2 for the determination
of PCDD/PCDF in compliance to EN 1948 Method
The EN 1948-1 “Filter condenser”
method foresee the isokinetic
sampling with a heated probe,
filterholder and adsorbing trap
XAD2/PUF after the condenser.
This system is dedicated to the
determination of the following
compounds:
Polycyclic Aromatic Hydrocarbons
(PAH)
Polychlorinated dibenzo dioxins
(PCDD)
Allowed materials are Titan, Quartz
and Glass.
The
mod.
MCS2
condenser
(Micro-pollutants
Condensation
System rev.2), equipped with the
cooling unit mod. ISOFROST, meets
the requirements of the standard and
grants a precise and automatic
temperature control of the gas after
the condenser needed for long term
samplings.
Condensing and Adsorbing trap device mod. “MCS2”
The MCS2 is the evolution of the
former MCS condensation system.
In this new version, particular
attention has been dedicated to the
treatment and transport of the sample.
the direct assembing to the heated
probe, the absence of silicon
connection tubes are the strenght
points of the system and make it easy
to be handled and used on the field.
The adsorbing trap XAD2/PUF and
the condense collection flask can be
quickly changed and sealed with
caps for the transport.
Note:
To use the MCS condensing device
with the heated probe is necessary
the Fixing Kit P/N
Cod. AC99-095-0002SN
AC99-095-9901KP
The compact and rugged realization,
Spare parts and accessories
Description
4
1
8
7
8
5
3
9
10
2
P/N
6
1 Condenser
AC99-095-0020SN
2 1 liter condense collection flask with cap
AC99-095-0021SN
3 Trap for adsorbent with caps
AC99-095-0024SN
4 Gas inlet connector
999VE188
5 Dry gas outlet with temperature probe inlet
999VE186
6 Adsorbent trap gas inlet adapter
999VE187
7 Condense flask fixing nipple
999EB080
8 PTFE - MVQ gaskets
999UC044
9 Cap with quick connector
999HA136
10 Hosebarb connector for the cooling liquid
999RB343
Carrying case for MCS2 and accessories
AC99-095-9905SP
Ed.2 01/05 - Technical specifications may change without previous warning
Polychlorinated dibenzo furans
(PCDF)
Polychlorinated biphenils (PCB)
Product Data Emission Line 1.110.06
TCR TECORA s.r.l. Via Alessandro Volta, 22/24 - 20094 Corsico (Mi) Italy - Tel. 02 4505501 Fax. 02 48601811 - www.tecora.it e-mail: [email protected]
“Filter condenser” Method - Condensation with adsorbing trap on dry gas
Emission Line
1.110.07
Isokinetic Heated Probe
Condensing and Adsorbing Device EPAMCS2 for the Determination
of PCDD/PCDF in Compliance to EPA 23 and EN 1948 Method
(PCDD)
Polychlorinated Dibenzo Furans
(PCDF)
Polychlorinated Biphenils (PCB)
Cooler liquid exit
The EPA 23 and EN 1948-1 methods
foresee the isokinetic sampling line
with a heated probe, filterholder and
XAD2 adsorbing trap for both gas and
condensate.
Cooler liquid inlet
Cooling bath with
circulating pump
mod, IGLOO P
This system is dedicated to the
determination of the following
compounds:
Polycyclic Aromatic Hydrocarbons
(PAH)
Polychlorinated Dibenzo Dioxins
Condensing Device and Adsorbing Trap
EPAMCS2 P/N AC99-095-0003SN
The adsorbent trap for solid materials
provided with cap allows the quick
substitution and sealing during
transportation avoiding the transfer
and manipulation of the samples on
the field.
The compact and robust execution,
the direct fixing to the heated probe,
the absence of tubes or mobile
connections are the strength points of
this system and make it particularly
easy to handle respect to other
systems.
To use the condensing device
EPAMCS with heated probe a fixing
kit is necessary.
Fixing Kit P/N AC99-095-9901KP
Allowed materials are Titan, Quartz
and Glass.
The sampling line in accordance to
the methods is composed by the
EPAMCS2 condenser, the cooling
bath unit mod. IGLOO P and a set
impingers.
For more information about IGLOO-P
see product data :
Emission Line1.012.01
Set of Glassware EPA 23
P/N AC99-096-0001SN
Consists of:
1. N 5 Washing bottles with threaded
rings
2. N 4 “U” Tubes
3. Temperature tip on gas outlet
4. Thermometer
2
3
1
Note:
4
Spare Parts and Accessories
4
10
1
8
7
8
2
Description
P/N
1 Condensing system
AC99-095-0020SN
2 XAD2 Refrigerated trap
AC99-095-0025SN
4 Inlet gas connector
999VE188
7 Fixing nipple for condensed vapour collection flask
999EB080
8 Gasket PTFE - MVQ
999UC044
10 Inlet hosebarb for cooling liquid
999RB343
Carrying case for MCS2 and accessories
AC99-095-9905SP
Product Data Emission Line 1.110.07 Ed.2 01/05 - Technical specifications may change without previous warning
TCR TECORA s.r.l. Via Alessandro Volta, 22/24 - 20094 Corsico (Mi) Italy - Tel. 02 4505501 Fax. 02 48601811 - www.tecora.it e-mail: [email protected]
“Filter condenser” Method - Adsorbing Trap on Gas and Condensate
Emission Line
1.110.08
Isokinetic Heated Probe
Accessories for Sampling Line Method US-EPA
The used configuration needs a
heated sampling probe with out stack
filter in accordance with US EPA 5
Method.
The special modularity realization of
Cooling Bath for n°6 Impingers
Glassware
Support for EPA Device
The cooling bath can be quickly
connected to the heated probe
through a support as it is shown in the
design.
P/N AC99-096-0013SP
A support kit is necessary for
mounting the cooling bath or the
MCS condensing system to the
heated probe equipped with a
heated box.
P/N AC99-095-9901KP
To decide about the necessary accessories for the specified determination please refer to the TCR Tecora sampling
line.
EPA 500 cc Free Tube Impinger
EPA 500 cc Plate Impinger
Gas Inlet Adapter
Equipped with threaded ring with
screw joints and gasket in PTFE.
Equipped with threaded ring with
screw joints and gasket in PTFE.
Equipped with spherical joint with
O-ring in Viton.
P/N AC99-096-9900SN
P/N AC99-096-9901SN
"U" Tube for Impinger EPA
Outlet Temperature Joint for
Impinger EPA
It is necessary for connecting two
impingers.
Equipped with outlet with ring with
screw joints and gasket for inserting a
thermometer.
P/N AC99-096-9907SN
P/N AC99-096-9905SN
P/N AC99-096-9908SN
Ed. 0 02/04 - Technical specifications may change without previous warning
Consists of a thermo isolated
stainless inox box.
Inside the box, there are up to 6
impingers of 500 cc. fitted.
our probes allows the separation of
the different elements for the simple
transport managing, and so giving
possibility to reconfigure the probes
for other reference methods.
Product Data Emission Line 1.110.08
TCR TECORA s.r.l. Via Alessandro Volta, 22/24 - 20094 Corsico (Mi) Italy - Tel. 02 4505501 Fax. 02 48601811 - www.tecora.it e-mail: [email protected]
Some EPA methods for compound
sampling in gaseous phase are
provided for using an impinger train
that is placed on the back of the
probe.
Emission Line
1.110.09
Isokinetic Heated probe
ISOTERM Thermoregulator Units
The connections are unified to allow
the widest versatility of use.
ISOTERM 4
In the 2 and 3 output models it is
possible to insert alarm thresholds
that activate a built-in sound and
visual signal.
P/N AC99-090-0090SP
With these units it is possible to
control:
- heated probes
- external filterholder box at the stack
- heated sampling lines
- wet gas meter
ISOTERM 2
P/N AC99-090-0094SP
Standard power cords:
Length
4m
8m
P/N
AC99-090-0091SP
AC99-090-0092SP
ISOTERM 1
P/N AC99-090-0093SP
Ed. 0 04/07 - Technical specifications may change without previous warning
Through the electronic PID regulators
it is possible to measure and control
the heated temperature in a precise
and effective way.
Product Data Emission Line 1.110.05
TCR TECORA s.r.l. Via Alessandro Volta, 22/24 - 20094 Corsico (Mi) Italy - Tel. 02 4505501 Fax. 02 48601811 - www.tecora.it e-mail: [email protected]
The ISOTERM thermoregulation
devices are available in three different
configurations that provide 1, 2 or 4
outputs.