Pumps Valves Systems
n
n
MR: Manual gearbox 1/4 Turn valves
Applications:
n
Industry
n
Oil and Gaz
n
Marine
-Cargo system
-Ballast system
-Fighting-fire system
-Treatment of ballast water
-Water
Further information:
www.ksb.com/products
ISORIA 10 DN800
with MR400
Your contact:
MR: Manual gearbox 1/4 Turn valves
For the actuation of any kind of ¼ turn valves.
Models MR 400 to 1600 can be motorized with electric actuators.
1
1
Ductile iron carter, cover and handwheel
Standardized force: operating force according to EN
12570 standard
2
6
5
5
Position indicator
4
Adjustable end stop in open
and close position
n
valve tightness
n
end stops
n
n
non-reversible in any position equipped with interchangeable insert.
Easy fitting on the valve
coupling on any type of valve shaft ends
6
Treated steel screw
Factory lubricated
No maintenance
Variant
Technical Data
Temperature range
Worm wheel kinematics from MR 50 to
MR 200 and asymmetric yoke up to MR 1600
n
Stainless steel drive shaft
3
4
Standard version -20 °C à +80 °C
Winterized version -50 °C à +80 °C
Output torques
Up to 16000 Nm
Enclosure
IP 68
Flange
ISO 5211
KSB Aktiengesellschaft
Johann-Klein-Straße 9
67227 Frankenthal (Germany)
www.ksb.com
n
Electrical motor
n
Handwheel extention with cardan join
Accessories for Automation
n
All AMTROBOX limit switchbox
n
All imit switchbox with VDI/VDE 3845 interface
8505.023-EN / 02.12 / Subject to technical modification without prior notice / © KSB S.A.S. 2012
2
.3