High Current Line Filters for 3-phase systems
FMAC Series, all-purpose filters to Protection Class I, conform to EN 133200, UL 1283 and IEC 60950
Nominal current:
Rated voltage UR (Umax):
Attenuation:
Leakage current:
Test voltages for 480 V:
Test voltages for 520 V:
Climatic category:
50% saturation typ.:
Inrush current:
MTBF @ 40°C / UR (Umax ):
6 - 1100 A @ ϑ
ϑa 40°C
480 and 520 VAC 50/60 Hz
High
for Industrial applications
L→ E 3
kVDC, 2 sec *
L → L 2.25 kVDC, 2 sec *
L→ E 4
kVDC, 2 sec *
L → L 2.25 kVDC, 2 sec *
25/100/21 acc. to IEC 60068-1
2 to 3 x IN @ 20°C
1.5 x IN 1 min. per hour
> 200’000 h acc. to MIL-HB-217 F
*without resistors
up to 250A
Approvals obtained
or pending:
up to 110A
All these filters are ideally suited for applications with EN 55011, EN
55014 and EN 55022 requirements.
The TIMONTA high current filter family FMAC was developed
for the following industrial applications:
• Frequency Converters
• Stepper Motor Drives
• UPS-Systems
• Inverters
• All the versions include insulated safety screw terminals.
• Optionally VHV version (up to 760 VAC) are available on request
• Optionally, wire lead connections instead of the screw terminals
are available (m.o.q. 50 pcs).
• Key features of the high current filter range include:
− easy, space saving installation
− high symmetrical and asymmetrical mode attenuation
(from 10 kHz to 300 MHz)
• To maximize the filter performance in the application, the
following EMC-rules should be considered:
− physical separation of filter input and output lines
− physical separation of the interference source itself
− dedicated earth connection for the filter
Three versions of these filters are available. The first one, most important,
includes filters for applications where high performances are required,
with maximum rated voltage 480VAC. The second has been developed for
standard use, also up to 480 VAC. The third (HV) is similar to the first one
but has a maximum rated voltage of 520VAC. These filters can also be
used in IT power systems in which the voltage between phases and earth
can reach 520 VAC.
Technical data of the high performance version - Rated voltage UR (Umax.) 480 VAC
Type
IN (1)
@ ϑa 40°C
UR
(Umax)
50/60 Hz
[A]
FMAC-0924-0610
FMAC-0931-0810
FMAC-0931-1610
FMAC-0932-1610
FMAC-0932-2510
FMAC-0934-3610
FMAC-0934-5010
FMAC-0953-6410
FMAC-0937-8010
FMAC-0954-H110
FMAC-0955-H210
FMAC-0956-H310
FMAC-0956-H410
FMAC-0957-H550
FMAC-0957-H650
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
6
8
16
16
25
36
50
64
80
110
180
250
340
450
550
[V]
480
480
480
480
480
480
480
480
480
480
480
480
480
480
480
LN
(2)
-30%/+50%
[mH]
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
10
10
6
6
3
2
1
0.6
1
0.7
0.4
0.3
0.2
0.2
0.2
ResistancePower
Max. leakage current
L-L’
dissipation @ 440 V/50 Hz
± 15%
[mΩ]
total
± 15%
[W]
23
28
11.5
11.5
4.4
3.32
1.3
1.1
1.17
0.75
0.37
0.2
0.13
0.06
0.046
2.48
5.38
8.83
8.83
8.25
12.91
9.75
13.52
22.60
27.23
36
36
45
40
45
In 3-phase
systems (3)
[mA]
≤ 5
C1
C2
C3
C4
Worst
case (4) ± 20% ± 20% ± 20% ± 20%
[mA]
[µF]
[µF]
[nF]
[nF]
40
40
40
40
156
156
160
160
167
167
167
175
176
176
176
1.0
1.0
1.0
1.0
4.4
4.4
4.4
4.4
6.6
6.6
6.6
11
11
11
11
−
−
−
−
1
1
1
1
1
1
1
1
1
1
1
100
100
100
100
10
10
10
10
47
47
47
100
100
100
100
10
10
10
10
47
47
100
100
100
100
100
100
100
100
100
C5
± 20%
[µF]
2.2
2.2
2.2
2.2
4.4
4.4
4.4
4.4
6.6
6.6
6.6
11
22
22
22
C6
R1
R2
Case Terminal
blocks
± 20%
[µF] [MΩ] [MΩ]
−
−
−
−
1
1
1
1
1
1
1
1
1
1
1
−
−
−
−
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
0.5
0.25
0.25
0.25
2
[mm ]
24-3
4
31-3
4
31-3
4
32-3
4
32-7
6
34-3
10
34-3
10
53-3
25
37-3
25
54-3
50
55-3
95
56-3 240
56-3 240
57
(A)
57
(A)
(1) Current derating over 40°C : I = IN x
(100-ϑa)/60
(2) Nominal inductance measured according to EN 138100, see introduction of this catalog, paragraph 3.4
(3) Measured according to IEC 60950 - 5.2.4 - 5.2.5, valid for TT and TN mains and with regular Sinus. See introduction of this catalog, paragraph 3.5
(4) Measured according to IEC 60950 - Annex G.4, valid for IT mains. See introduction of this catalog, paragraph 3.5
(A) Connection straps for M10
Circuit diagram
Insertion losses and case designs
see pages 78-79-80-81.
Continues in the next page.
75
High Current Line Filters for 3-phase systems
FMAC Series, all-purpose filters to Protection Class I, conform to EN 133200, UL 1283 and IEC 60950
Technical data for the standard version - Rated voltage UR (Umax.) 480VAC
Type
IN (1)
@ ϑa 40°C
UR
(Umax)
50/60 Hz
FMAC-0932-2510L
FMAC-0932-3610L
FMAC-0934-5010L
FMAC-0934-6410L
3
3
3
3
[A]
[V]
x
x
x
x
480
480
480
480
25
36
50
64
LN (2)
-30%/+50%
[mH]
3
3
3
3
x
x
x
x
2.4
1.5
1
0.6
ResistancePower
Max. leakage current
L-L’
dissipation @ 440 V/50 Hz
± 15%
[mΩ]
total
± 15%
[W]
5.26
2.71
1.68
1.48
9.86
10.55
12.63
18.23
In 3-phase
systems (3)
[mA]
Insertion losses and case designs see pages 78-79-80-81
C2
C3
C4
C5
Worst
case (4) ± 20% ± 20% ± 20% ± 20%
[mA]
[µF]
[µF]
[nF]
[nF]
± 20%
[µF]
4.4
4.4
4.4
4.4
1
1
1
1
4.4
4.4
4.4
4.4
C1
C2
156
156
160
160
≤ 5
C1
10
10
10
10
47
47
100
100
C6
R1
R2
Case Terminal
blocks
± 20%
[µF] [MΩ] [MΩ]
1
1
1
1
1
1
1
1
1
1
1
1
2
[mm ]
32-3
32-7
34-3
34-3
4
6
10
10
Technical data for the HV version and IT supply compatible Rated voltage UR (Umax.) 520VAC
Type
IN (1)
@ ϑa 40°C
UR
(Umax)
50/60 Hz
[A]
FMAC-0931-1612I
FMAC-0932-2512I
FMAC-0934-3612I
FMAC-0934-5012I
FMAC-0953-6412I
FMAC-0937-8012I
FMAC-0954-H112I
FMAC-0955-H212I
FMAC-0956-H312I
FMAC-0956-H412I
FMAC-0974-K152I
3
3
3
3
3
3
3
3
3
3
3
x
x
x
x
x
x
x
x
x
x
x
16
25
36
50
64
80
110
180
250
340
1100
[V]
520
520
520
520
520
520
520
520
520
520
520
Insertion losses and case designs see pages 78-79-80-81
LN
(2)
-30%/+50%
[mH]
3
3
3
3
3
3
3
3
3
3
3
x
x
x
x
x
x
x
x
x
x
x
ResistancePower
Max. leakage current
L-L’
dissipation @ 480 V/50 Hz
total
± 15%
[W]
± 15%
[mΩ]
6
11.5
3
4.4
2
3.32
1
1.3
0.6
1.1
1
1.17
0.7
0.75
0.4
0.37
0.3
0.2
0.2
0.13
0.12
0.022
In 3-phase
systems (3)
[mA]
8.83
8.25
12.91
9.75
13.52
22.60
27.23
36
36
45
80
≤ 5
C3
C4
Worst
case (4) ± 20% ± 20% ± 20% ± 20%
[mA]
[µF]
[µF]
[nF]
[nF]
26
172
172
172
172
179
179
179
185
188
182
1.5
3
3
3
3
4.5
4.5
4.5
7.5
7.5
11
−
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
50
50
50
50
50
50
50
50
50
50
−
11
11
11
11
11
50
50
50
50
50
−
C5
± 20%
[µF]
1.5
3
3
3
3
4.5
4.5
4.5
7.5
15
22
C6
R1
R2
Case Terminal
blocks
± 20%
[µF] [MΩ] [MΩ]
−
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
1.1
−
1
1
1
1
1
1
1
1
1
0.5
2
2
2
2
2
2
2
2
2
2
0.25
2
[mm ]
31-3
4
32-7
6
34-3
10
34-3
10
53-3
25
37-3
25
54-3
50
55-3
95
56-3 240
56-3 240
74
(A)
(100-ϑa)/60
(1) Current derating over 40°C : I = IN x
(2) Nominal inductance measured according to EN 138100, see introduction of this catalog, paragraph 3.4
(3) Measured according to IEC 60950 - 5.2.4 - 5.2.5, valid for TT and TN mains and with regular Sinus. See introduction of this catalog, paragraph 3.5
(4) Measured according to IEC 60950 - Annex G.4, valid for IT mains. See introduction of this catalog, paragraph 3.5
(A) Connection straps for M12
Drive’s Rating - Recommended Filter Type
Motor rating 400VAC
[PS / HP]
[kW]
1
2
5
10
15
20
25
30
38
60
87
133
160
227
400
0.75
1.5
3.7
7.5
11
15
18.5
22.5
28
45
65
100
120
170
300
Converter rating
[kVA]
to
to
to
to
to
to
to
to
to
to
to
to
to
to
to
1.5
2.9
6.8
12.2
20
26
30
40
50
85
120
160
200
260
500
Recommended filter
IN [A] (*)
Circuit diagram
6
8
16
25
36
50
64
80
110
180
250
340
450
550
1100
(*) The exact current value depends of the efficiency of the converter
and the application (current effective value).
Insertion losses and case designs see pages 78-79-80-81.
76
High Current Line Filters for 3-phase + neutral systems
FMAC / FMAD Series, Insertion loss
Insertion loss FMAC high performance
The symmetrical and asymmetrical attenuation curves of the HV version and the FMAD serie correspond approximately to the equivalent FMAC high
performance models. Variations are within the read-out precision of the curves.
Insertion loss FMAC standard
78
High Current Line Filters for 3-phase + neutral systems
FMAC / FMAD / FMBC Series, Cases
Case 24-4 (24-3)
Case 27-4 (27-3)
Case 31-4 (31-3)
Case 32-4 (32-3)
Case 32-8 (32-7)
79
High Current Line Filters for 3-phase + neutral systems
FMAC / FMAD / FMBC Series, Cases
Case 34-4 (34-3)
Case 37-4 (37-3)
Case 38-4 (38-3)
Case 40-3
Case 53-4 (53-3)
80
High Current Line Filters for 3-phase + neutral systems
FMAC / FMAD Series, Cases
Case 54-4 (54-3)
Case 55-4 (55-3)
Case 56-4 (56-3)
Case 57
Case 74
81